SS12-S100 SS12 - S100 Features • Glass passivated junctions. • High current capability, low VF. • For use in low voltage, high frequency inverters free wheeling, and polarity protection applications. SMA/DO-214AC COLOR BAND DENOTES CATHODE 1.0 Ampere Schottky Barrier Rectifiers Absolute Maximum Ratings* Symbol IF(AV) TA = 25°C unless otherwise noted Parameter Value Units 1.0 A 40 A 1.1 11 88 W mW/°C °C/W RθJA Average Rectified Current .375 " lead length @ TA = 75°C Non-repetitive Peak Forward Surge Current 8.3 ms single half-sine-wave Superimposed on rated load (JEDEC method) Total Device Dissipation Derate above 25°C Thermal Resistance, Junction to Ambient ** Tstg Storage Temperature Range -65 to +150 °C TJ Operating Junction Temperature -65 to +125 °C IFSM PD *These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. **Device mounted on FR-4 PCB 0.013 mm. Electrical Characteristics Symbol TA = 25°C unless otherwise noted Parameter Device Units 12 13 14 15 16 18 19 100 VRRM Maximum Repetitive Reverse Voltage 20 30 40 50 60 80 90 100 V VRMS Maximum RMS Voltage 14 21 28 35 42 56 64 71 V VR DC Reverse Voltage (Rated VR) Maximum Instantaneous Reverse Current TA = 25°C (Note 1) @ rated VR TA = 100°C Maximum Instantaneous Forward Voltage @ 1.0 A 20 30 40 50 60 80 90 100 V IRM VFM 0.2 10 500 700 mA mA 850 mV Note: Pulse Test: Pulse Width ≤ 300 µs, Duty Cycle ≤ 2.0% 2001 Fairchild Semiconductor Corporation SS12-S100, Rev. A1 (continued) Typical Characteristics Forward Current Derating Curve Forward Characteristics 20 FORWARD CURRENT (A) FORWARD CURRENT (A) 1 0.75 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD P.C.B. MOUNTED ON 0.2x0.2"(5.0x5.0mm) COPPER PAD AREAS 0.5 0.25 0 0 20 40 60 80 100 LEAD TEMPERATURE ( º C) 120 5 SS15 - SS16 SS18 - S100 1 T J = 25ºC µS Pulse Width = 300µ 1% Duty Cycle 0.1 140 SS12 - SS14 10 0 Non-Repetitive Surge Current Junction Capacitance 25 200 CAPACITANCE (pF) FORWARD SURGE CURRENT (A) 2 400 30 8.3ms Single Half Sine-Wave JEDEC Method 20 15 10 T J = 25ºC 100 50 40 30 20 5 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 FORWARD VOLTAGE (V) 1 2 5 10 20 50 NUMBER OF CYCLES AT 60Hz 100 10 0.1 0.5 1 5 10 REVERSE VOLTAGE (V) 50 100 SS12-S100, Rev. A1 SS12-S100 Schottky Barrier Rectifiers DO-214AC(SMA) Tape and Reel Data DO-214AC(SMA) Packaging Configuration: Figure 1.0 Packaging Description: DO-214AC(SMA) parts are shipped in tape. The carrier tape is made from a dissipative (carbon filled) polycarbonate resin. Alternate carrier tape is made of antistatic plastic. The cover tape is a multilayer film (Heat Activated Adhesive in nature) primarily composed of polyester film, adhesive layer, sealant, and anti-static sprayed agent. These reeled parts in standard option are shipped with 7,500 units per 13" or 330cm diameter reel. The reel comes in plastic or carton which is made of polystyrene plastic (anti-static coated) and thick white paper respectively. Further information is described in the Packaging Information table. Antistatic Cover Tape These full reels are individually labeled and placed inside a bleach box (illustrated in figure 1.0) made of recyclable carton paper with a Fairchild logo printing. One box contains two reels maximum. Certain number of these boxes are placed inside shipping box which comes in different sizes depending on the number of parts shipped. Embossed Carrier Tape Human Readable /Barcode Label Cathode F924 18L3 F924 18L3 F924 18L3 F924 18L3 F924 18L3 DO-214AC(SMA) unit orientation DO-214AC(SMA) Packaging Information Packaging Option Packaging type Under package code P5 TNR Under package code MA TNR 7,500 5,000 13 13 Qty per Reel/Tube/Bag Reel Size (inch diameter) 336X336X38 340X350X340 Max qty per Box 15,000 10,000 Weight per unit (gm) 0.064 0.064 Weight per Reel (kg) 0.860 0.750 Human readable label Barcode label Box Dimension (mm) Note/Comments Human Readable/Barcode Label (on top) 336mm x 336mm x 38mm Intermediate container for 13" reel option Human readable/barcode Label Human Readable Label sample CAUTION: This container provides protection for static sensitive devices. Handle devices with caution upon removal. MADE IN ONE OR MORE OF THE FOLLOWING COUNTRIES: PHILIPPINES (MACTAN, EXPORT PROCESSING ZONE), MALAYSIA, CHINA, S. KOREA, TAIWAN, THAILAND, SINGAPORE AND JAPAN. F63TNR Label sample I.D. FMKA140 ANTI-STATIC Qty 7500 D/C T0012 Lot CBVK741B019 LOT: CBVK741B019 QTY: 7500 FSID: FMKA140 SPEC: D/C1: T0012 QTY1: SPEC REV: D/C2: QTY2: CPN: FAIRCHILD SEMICONDUCTOR INTERNATIONAL DO-214AC(SMA) Tape Leader and Trailer Configuration: Figure 2.0 (F63TNR)3.2 Carrier Tape Cover Tape Trailer Tape 160mm minim m or ©2000 Fairchild Semiconductor International Components Leader Tape 390mm minim m July 2000, Rev. A DO-214AC(SMA) Tape and Reel Data, continued DO-214AC(SMA) Embossed Carrier Tape Configuration: Figure 3.0 P0 D0 T E1 F K0 W E2 Wc B0 Tc A0 D1 P1 User Direction of Feed Dimensions are in millimeter Pkg type DO-214AC(SMA) (12mm) A0 B0 2.72 +/-0.10 5.25 +/-0.10 W 12.0 +/-0.3 D0 D1 E1 E2 1.55 +/-0.05 1.125 +/-0.125 1.75 +/-0.10 F 10.25 min 5.5 +/-0.05 P1 P0 4.0 +/-0.1 4.0 +/-0.1 Notes: A0, B0, and K0 dimensions are determined with respect to the EIA/Jedec RS-481 rotational and lateral movement requirements (see sketches A, B, and C). K0 T Wc 2.45 +/-0.10 0.23 +/-0.10 0.06 +/-0.02 0.5mm maximum 20 deg maximum Typical component cavity center line B0 9.3 +/-0.025 Tc 0.5mm maximum 20 deg maximum component rotation Typical component center line Sketch A (Side or Front Sectional View) A0 Component Rotation Sketch C (Top View) Component lateral movement Sketch B (Top View) Component Rotation DO-214AC(SMA) Reel Configuration: Figure 4.0 W1 Measured at Hub B Min Dim C Dim A max Dim D min Dim N DETAIL AA See detail AA 13" Diameter Option W2 max Measured at Hub Dimensions are in inches and millimeters Tape Size 12mm Reel Option 13" Dia Dim A Dim B 13.0 330 0.059 1.5 Dim C 512 +0.020/-0.008 13 +0.5/-0.2 Dim D 0.795 20.2 Dim N 1.97 50 min Dim W1 0.331 +0.059/-0.000 8.4 +1.5/0 Dim W2 0.567 14.4 July 2000, Rev. A DO-214AC(SMA) Package Dimensions DO-214AC(SMA) (FS PKG Code P5) 1:1 Scale 1:1 on letter size paper Dimensions shown below are in: inches [millimeters] Part Weight per unit (gram): 0.064 0.181 (4.597) 0.157 (3.988) 3.93 3.73 0.062 (1.575) 0.055 (1.397) 2 1 0.114 (2.896) 0.098 (2.489) 0.208 (5.283) 0.188 (4.775) 0.008 (0.203) 0.002 (0.051) ©2000 Fairchild Semiconductor International + 2.38 2.18 5.49 5.29 0.096 (2.438) 0.078 (1.981) 0.060 (1.524) 0.030 (0.762) 1.67 1.47 Minimum Recommended Land Pattern 0.012 (0.305) 0.006 (0.152) August 1999, Rev. A TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx™ Bottomless™ CoolFET™ CROSSVOLT™ DOME™ E2CMOSTM EnSignaTM FACT™ FACT Quiet Series™ FAST FASTr™ GlobalOptoisolator™ GTO™ HiSeC™ ISOPLANAR™ MICROWIRE™ OPTOLOGIC™ OPTOPLANAR™ PACMAN™ POP™ PowerTrench QFET™ QS™ QT Optoelectronics™ Quiet Series™ SILENT SWITCHER SMART START™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TinyLogic™ UHC™ VCX™ DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. G