Mini-mold LED Lamp GL1❏❏112 series ø2mm, Forming Type, Colored Diffusion, Compact LED Lamp for Backlight/Indicator GL1❏❏112 series ■ Outline Dimensions ■ Radiation Diagram (Unit:mm) (Ta=25˚C) Colored diffusion 7.0±0.3 3.5 R 1. 0 1.0±0.2 5˚ 5˚ 5˚ -10˚ -20˚ 1.6 (4.0) 5˚ -60˚ (6.0) 5˚ A 0.25 5˚ 5˚ 0.25 0.7 -70˚ 0.5 1 +20˚ +30˚ +40˚ -50˚ R0.3 0˚ 100 +10˚ -40˚ 1.5±0.2 5˚ 2.6MAX -30˚ 2.5 3.0 Relative luminous intensity(%) 3.5 80 +50˚ 60 +60˚ 40 +70˚ 20 -80˚ +80˚ -90˚ +90˚ 0 2 10˚NOM 10˚NOM ±10˚NOM Pin connections 1 Cathode 2 Anode Unspecified tolerance:±0.2 ■ Absolute Maximum Ratings (Ta=25˚C) Model No. Radiation color Radiation material GL1PR112 Red GaP GL1HD112 Red GaAsP on GaP GL1HS112 Sunset orange GaAsP on GaP GL1HY112 Yellow GaAsP on GaP GL1EG112 Yellow-green GaP *1 Duty ratio=1/10, Pulse width=0.1ms *2 Below the A portion of outline drawing Power dissipation Forward current Peak forward current P IF IFM*1 (mW) (mA) (mA) 23 85 85 50 50 10 30 30 20 20 50 50 50 50 50 Derating factor Reverse voltage Operating temperature Storage temperature Soldering temperature (mA/˚C) VR Topr Tstg Tsol*2 (V) (˚C) (˚C) (˚C) DC Pulse 0.13 0.40 0.40 0.27 0.27 0.67 0.67 0.67 0.67 0.67 5 5 5 5 5 -25 to +85 -25 to +85 -25 to +85 -25 to +85 -25 to +85 -25 to +100 -25 to +100 -25 to +100 -25 to +100 -25 to +100 ■ Electro-optical Characteristics Lens type Model No. GL1PR112 GL1HD112 Colored GL1HS112 diffusion GL1HY112 GL1EG112 (Notice) Forward voltage VF(V) TYP 1.9 2.0 2.0 1.9 1.95 MAX 2.3 2.8 2.8 2.5 2.5 260 260 260 260 260 (Ta=25˚C) Peak emission wavelength Luminous intensity IF IF IV(mcd) λp(nm) (mA) (mA) TYP TYP 695 5 2.6 5 635 20 8.8 20 610 20 14.0 20 585 10 4.5 10 565 10 7.0 10 Spectrum radiation bandwidth IF ∆λ(nm) (mA) TYP 100 5 35 20 35 20 30 10 30 10 Reverse current VR IR(µA) (V) MAX 10 4 10 4 10 4 10 4 10 4 Page for characteristics (MHZ) diagrams → 1 → 1 → 1 → 1 → 1 Terminal capacitance Ct(pF) TYP 55 20 15 35 35 ¡In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. 112 (Internet) ¡Data for sharp's optoelectronic/power device is provided for internet.(Address http://www.sharp.co.jp/ecg/) LED Lamp Characteristics Diagrams PR series Forward Current Derating Curve Forward Current vs. Forward Voltage(Note) 60 Luminous Intensity vs. Ambient Temperature(Note) (Ta=25˚C) 100 (Ta=25˚C) 1000 500 50 40 30 20 Relative luminous intensity(%) Forward current IF(mA) Forward current IF(mA) 50 10 5.0 1.0 0.5 100 50 10 5.0 10 0 -25 0 25 50 75 85 100 0.1 1.0 125 1.0 1.2 1.4 Ambient temperature Ta(˚C) 1.6 1.8 2.0 2.2 2.4 -20 2.6 0 Luminous Intensity vs. Forward Current(Note) Peak Forward Current Derating Curve 40 60 80 100 120 Duty Ratio vs. Peak Forward Current (Ta=25˚C) 1000 60 20 Ambient temperature Ta(˚C) Forward voltage VF(V) (Ta=25˚C) 500 500 200 200 40 30 20 Peak forward current IFM(mA) Relative luminous intensity(%) Peak forward current IFM(mA) 50 100 50 20 10 5.0 100 50 20 10 5.0 10 2.0 0 -25 0 25 50 75 85 100 1.0 0.1 125 2.0 1.0 0.2 0.5 1 2 5 10 20 1/50 50 1/20 1/10 Forward current IF(mA) Ambient temperature Ta(˚C) 1/5 1/2 1 Duty ratio DR HD series Forward Current vs. Forward Voltage(Note) Forward Current Derating Curve Luminous Intensity vs. Ambient Temperature(Note) (Ta=25˚C) 100 60 (Ta=25˚C) 1000 50 500 40 30 20 Relative luminous intensity(%) Forward current IF(mA) Forward current IF(mA) 50 10 5.0 1.0 0.5 100 50 10 5.0 10 0 -25 0 25 50 75 85 100 0.1 1.0 125 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 -20 0 Forward voltage VF(V) Ambient temperature Ta(˚C) Luminous Intensity vs. Forward Current(Note) Peak Forward Current Derating Curve 40 60 80 100 120 Duty Ratio vs. Peak Forward Current (Ta=25˚C) (Ta=25˚C) 1000 60 20 Ambient temperature Ta(˚C) 500 500 200 200 40 30 20 Peak forward current IFM(mA) Relative luminous intensity(%) Peak forward current IFM(mA) 50 100 50 20 10 5.0 100 50 20 10 5.0 10 2.0 2.0 0 -25 0 25 50 75 85 Ambient temperature Ta(˚C) 100 125 1.0 0.1 1.0 0.2 0.5 1 2 5 10 20 Forward current IF(mA) 50 1/50 1/20 1/10 1/5 1/2 1 Duty ratio DR Note)Characteristics shown in diagrams are typical values. (not assurance value) (Notice) ¡In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. 118 (Internet) ¡Data for sharp's optoelectronic/power device is provided for internet.(Address http://www.sharp.co.jp/ecg/) LED Lamp Characteristics Diagrams HS series Forward Current Derating Curve Forward Current vs. Forward Voltage(Note) 60 Luminous Intensity vs. Ambient Temperature(Note) (Ta=25˚C) 100 50 500 30 20 Relative luminous intensity(%) Forward current IF(mA) Forward current IF(mA) 50 40 20 10 5 3 2 10 0 25 50 75 85 100 0.5 1.0 125 200 100 50 20 1 0 -25 (IF=20mA) 1000 10 1.2 1.4 Ambient temperature Ta(˚C) 1.6 1.8 2.0 2.2 2.4 -20 0 Forward voltage VF(V) 60 500 50 200 40 60 80 100 Duty Ratio vs. Peak Forward Current Luminous Intensity vs. Forward Current(Note) Peak Forward Current Derating Curve 20 Ambient temperature Ta(˚C) (Ta=25˚C) (Ta=25˚C) 500 40 30 20 100 Peak forward current IF(mA) Relative luminous intensity(%) Peak forward current IFM(mA) 300 50 20 10 5 10 0 25 50 75 85 100 1 0.1 125 50 30 10 2 0 -25 100 5 0.2 0.5 1 2 5 10 20 1/50 50 1/20 1/10 1/5 1/2 1 Duty ratio DR Forward current IF(mA) Ambient temperature Ta(˚C) HY series Forward Current Derating Curve Forward Current vs. Forward Voltage(Note) 60 Luminous Intensity vs. Ambient Temperature(Note) (Ta=25˚C) 100 (Ta=25˚C) 1000 50 500 40 30 20 Relative luminous intensity(%) Forward current IF(mA) Forward current IF(mA) 50 10 5.0 1.0 0.5 100 50 10 5.0 10 0 -25 0 25 50 75 85 100 0.1 1.0 125 1.0 1.2 1.4 Ambient temperature Ta(˚C) 1.6 1.8 2.0 2.2 2.4 2.6 -20 0 Forward voltage VF(V) 60 80 100 120 (Ta=25˚C) (Ta=25˚C) 1000 60 40 Duty Ratio vs. Peak Forward Current Luminous Intensity vs. Forward Current(Note) Peak Forward Current Derating Curve 20 Ambient temperature Ta(˚C) 500 500 200 200 40 30 20 Peak forward current IFM(mA) Relative luminous intensity(%) Peak forward current IFM(mA) 50 100 50 20 10 5.0 100 50 20 10 5.0 10 2.0 2.0 0 -25 0 25 50 75 85 Ambient temperature Ta(˚C) 100 125 1.0 0.1 1.0 0.2 0.5 1 2 5 10 20 Forward current IF(mA) 50 1/50 1/20 1/10 1/5 1/2 1 Duty ratio DR Note)Characteristics shown in diagrams are typical values. (not assurance value) ¡In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. (Internet) ¡Data for sharp's optoelectronic/power device is provided for internet.(Address http://www.sharp.co.jp/ecg/) (Notice) 119 LED Lamp Characteristics Diagrams EG series Forward Current vs. Forward Voltage(Note) Forward Current Derating Curve Luminous Intensity vs. Ambient Temperature(Note) (Ta=25˚C) 100 60 (Ta=25˚C) 1000 50 500 40 30 20 Relative luminous intensity(%) Forward current IF(mA) Forward current IF(mA) 50 10 5.0 1.0 0.5 100 50 10 5.0 10 0 -25 0 25 50 75 85 100 0.1 1.0 125 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 -20 0 Forward voltage VF(V) Ambient temperature Ta(˚C) Peak Forward Current Derating Curve 40 60 80 100 120 Duty Ratio vs. Peak Forward Current Luminous Intensity vs. Forward Current(Note) 60 20 Ambient temperature Ta(˚C) (Ta=25˚C) (Ta=25˚C) 1000 500 500 200 200 40 30 20 Peak forward current IFM(mA) Relative luminous intensity(%) Peak forward current IFM(mA) 50 100 50 20 10 5.0 100 50 20 10 5.0 10 2.0 2.0 0 -25 0 25 50 75 85 100 1.0 0.1 125 1.0 0.2 0.5 Ambient temperature Ta(˚C) 1 2 5 10 20 1/50 50 1/20 1/10 1/5 1/2 1 Duty ratio DR Forward current IF(mA) Note)Characteristics shown in diagrams are typical values. (not assurance value) KG series Forward Current vs. Forward Voltage(Note) Forward Current Derating Curve Luminous Intensity vs. Ambient Temperature(Note) (Ta=25˚C) 100 60 (Ta=25˚C) 1000 50 500 40 30 20 Relative luminous intensity(%) Forward current IF(mA) Forward current IF(mA) 50 10 5.0 1.0 0.5 100 50 10 5.0 10 0 -25 0 25 50 75 85 100 0.1 1.0 125 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 -20 0 Forward voltage VF(V) Ambient temperature Ta(˚C) Peak Forward Current Derating Curve Luminous Intensity vs. Forward Current(Note) 60 20 40 60 80 100 120 Ambient temperature Ta(˚C) Duty Ratio vs. Peak Forward Current (Ta=25˚C) (Ta=25˚C) 1000 500 500 200 200 40 30 20 Peak forward current IFM(mA) Relative luminous intensity(%) Peak forward current IFM(mA) 50 100 50 20 10 5.0 100 50 20 10 5.0 10 2.0 2.0 0 -25 0 25 50 75 85 Ambient temperature Ta(˚C) 100 125 1.0 0.1 1.0 0.2 0.5 1 2 5 10 20 Forward current IF(mA) 50 1/50 1/20 1/10 1/5 1/2 1 Duty ratio DR Note)Characteristics shown in diagrams are typical values. (not assurance value) (Notice) ¡ In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. 120 (Internet) ¡ devices Data for sharp's optoelectronic/power device is provided for internet.(Address http://www.sharp.co.jp/ecg/)