THERMAL CONVERTERS The content of this specification may change without notification 10/16/07 MJTC Series - Thin-Film Planar Multijunction Thermal Converters Custom solutions are available. FEATURES HOW TO ORDER MJTC- 101 G X M Packaging TCR (ppm/°C) X = ±25ppm Resistance Tolerance G = ±2% Resistance 100Ω = 101 500Ω = 501 1,000Ω = 102 Improved high-frequency ac-dc transfer differences Special thin-film thermopile technology Good thermal coupling and high electric isolation between the input and output circuits. Sensitivity of 10-6 to 10-7 for comparing rms power between AC and DC input voltages. Frequency characteristic of better than 0.001% in the frequency range of 10 Hz to 100 kHz, and better than 0.01% at 100kHz to 1 MHz. Series Thin Film Planar Multijunction Thermal Converter DIMENSIONS & CONFIGURATION Pin Legend 1 Input Hi 2 Input Lo, Internal Connect to 7 3 DC Output + (1) 4 DC Output - (1) 5 DC Output - (2) 6 DC Output + (2) 7 Input Lo, Internal Connect to 2 Env. Input/Output Output Input SPECIFICATIONS & PERFORMANCE EQUIVALENT CIRCUIT & PIN ASSIGNMENT Rated Power 0.1W Max Applied Power 0.5W Resistance (Ω) 50, 100, 200, 500, 1K, or 2K TCR (ppm/°C) ±25 Frequency Range DC-1MHz Rating output voltage More than 60mV Output Resistance 340 Ohms ±30% Top View TC of Output Resistance ±300ppm/K RECOMMENDED FOOT PATTERN Sensitivity More than 0.6 V/W TC of Sensitivity -0.001mV/mW/K (typical) Note: Direct connection to center conductor of RF connecter from pin 1 is recommended. Response Time 2.5 ± 0.6 sec (63% response) AC-DC Difference, 10k-100kHz < 10ppm (typical) AC-DC Difference, 100K-1MHz < 10ppm (typical) Operating Temperature 25°C ± 5°C Storage Temperature -20°C ~ +60°C American Accurate Components, Inc. 188 Technology Drive, Unit H Irvine, CA 92618 TEL: 949-453-9888 FAX: 949-453-8889 1