API_newlayouts_single:APIcatalog_newlayouts 8/26/10 2:44 PM Page 109 • Excellent electromagnetic shielding performance for commercial and industrial applications • Cost-effective design • For higher saturation levels use Series PTHF-VM s or ct du In Actual Size (PT**25-894VM) er w Po Vertical Toroidal Power Chokes ) Hz (M M MU NI CE MI F AN ) SR ST S SI HM RE M (O DC MU DC A XI dl 0% MA 2 ∆L RT PA * ER MB PTHFxxxxR-VM PTKMxxxxR-VM PTHF-VM PTKM-VM C AD dl 0% 1 ∆L NU S) MP (A C ID D H) TE (µ RA CE 0% AN ±1 CT Hz DU 1 k IN @ SERIES SERIES PTHF-VM HIGH SATURATION CORE PTHF10-50VM 0.010 8.70 6.00 7.36 10 PTHF25-50VM 0.020 5.30 3.60 5.20 25 PTHF50-50VM 0.035 3.10 2.00 3.93 50 PTHF75-50VM 0.045 2.50 1.60 3.47 75 PTHF100-50VM 0.055 2.20 1.50 3.14 100 PTHF150-50VM 0.100 1.80 1.20 2.33 150 PTHF200-50VM 0.140 1.60 1.00 1.97 200 PTHF250-50VM 0.160 1.40 0.90 1.84 250 PTHF330-50VM 0.190 1.20 0.80 1.69 330 PTHF10-121VM 0.010 14.00 9.00 8.27 10 PTHF25-121VM 0.017 10.50 7.00 6.34 25 PTHF50-121VM 0.030 6.00 3.90 4.77 50 PTHF75-121VM 0.045 5.80 3.90 3.90 75 PTHF100-121VM 0.065 4.70 3.40 3.24 100 PTHF150-121VM 0.095 4.80 3.30 2.68 150 PTHF250-121VM 0.160 3.20 2.20 2.07 250 PTHF10-59VM 0.008 20.00 15.00 14.50 10 PTHF25-59VM 0.011 16.00 11.00 9.80 25 PTHF50-59VM 0.022 12.00 8.30 6.90 50 PTHF75-59VM 0.030 9.10 6.70 5.90 75 PTHF100-59VM 0.044 8.20 6.50 4.90 100 PTHF150-59VM 0.052 6.00 4.20 4.50 150 PTHF250-59VM 0.088 5.60 4.00 3.50 250 PTHF500-59VM 0.160 3.80 2.70 2.60 500 PTHF750-59VM 0.240 2.70 1.80 2.10 750 PTHF25-894VM 0.012 20.00 13.50 12.80 25 PTHF50-894VM 0.016 15.20 10.80 9.90 50 PTHF75-894VM 0.023 12.00 8.00 8.00 75 PTHF100-894VM 0.023 10.60 7.10 8.00 100 PTHF150-894VM 0.035 9.00 6.00 6.50 150 PTHF250-894VM 0.060 6.80 4.60 5.00 250 PTHF500-894VM 0.131 4.60 3.10 3.40 500 PTHF750-894VM 0.160 4.00 2.70 3.00 750 PTHF1000-894VM 0.235 3.50 2.30 2.40 1000 35.0 10.0 4.0 3.5 2.5 1.5 1.3 1.0 0.8 20.0 6.5 3.5 2.5 2.0 1.5 1.0 10.0 8.0 3.5 2.5 2.0 1.0 0.9 0.7 0.5 8.0 4.0 2.5 2.0 1.0 0.9 0.7 0.6 0.4 SERIES PTKM-VM FERROUS ALLOY CORE 0.010 3.30 1.70 7.36 10 PTKM10-50VM 0.020 1.90 1.00 5.20 25 PTKM25-50VM 0.035 1.30 0.70 3.93 50 PTKM50-50VM 0.045 1.10 0.60 3.47 75 PTKM75-50VM 0.055 0.96 0.50 3.14 100 PTKM100-50VM 0.100 0.78 0.40 2.33 150 PTKM150-50VM 0.140 0.65 0.35 1.97 200 PTKM200-50VM 0.160 0.59 0.31 1.84 250 PTKM250-50VM 0.190 0.50 0.27 1.69 330 PTKM330-50VM 0.010 9.10 5.30 8.27 10 PTKM10-121VM 0.017 5.70 3.30 6.34 25 PTKM25-121VM 0.030 4.00 2.30 4.77 50 PTKM50-121VM 0.045 3.10 1.80 3.90 75 PTKM75-121VM 0.065 2.80 1.60 3.24 100 PTKM100-121VM 0.095 2.20 1.30 2.68 150 PTKM150-121VM 0.160 1.70 0.90 2.07 250 PTKM250-121VM 0.008 13.00 7.60 14.50 10 PTKM10-59VM 0.011 8.30 4.70 9.80 25 PTKM25-59VM 0.022 5.70 3.30 6.90 50 PTKM50-59VM 0.030 4.90 3.00 5.90 75 PTKM75-59VM 0.044 4.20 2.40 4.90 100 PTKM100-59VM 0.052 3.40 1.90 4.50 150 PTKM150-59VM 0.088 2.70 1.50 3.50 250 PTKM250-59VM 0.160 1.80 1.10 2.60 500 PTKM500-59VM 0.240 1.60 0.90 2.10 750 PTKM750-59VM 0.012 11.00 6.60 12.80 25 PTKM25-894VM 0.016 7.40 4.20 9.90 50 PTKM50-894VM 0.023 6.40 3.70 8.00 75 PTKM75-894VM 0.023 6.00 3.50 8.00 100 PTKM100-894VM 0.035 4.30 2.30 6.50 150 PTKM150-894VM 0.060 3.20 1.90 5.00 250 PTKM250-894VM 0.131 2.50 1.40 3.40 500 PTKM500-894VM 0.160 2.10 1.20 3.00 750 PTKM750-894VM 0.235 1.80 1.00 2.40 1000 PTKM1000-894VM 35.0 10.0 4.0 3.5 2.5 1.5 1.3 1.0 0.8 20.0 6.5 3.5 2.5 2.0 1.5 1.0 10.0 8.0 3.5 2.5 2.0 1.0 0.9 0.7 0.5 8.0 4.0 2.5 2.0 1.0 0.9 0.7 0.6 0.4 • Current rating from 1.69 to 14.5 amps • Inductance values from 10 µH to 1000 µH Physical Parameters on Next Page Notes 1) Rated current is based on a 35°C temperature rise at an ambient temperature of 90°C. 2) Incremental current is the approximate value that will cause a percentage drop in inductance as indicated in the table. *Complete part # must include series # PLUS the dash # For surface finish information, refer to www.delevanfinishes.com 270 Quaker Rd., East Aurora NY 14052 • Phone 716-652-3600 • Fax 716-652-4814 • E-mail: [email protected] • www.delevan.com 1/2009 API_newlayouts_single:APIcatalog_newlayouts 8/26/10 2:45 PM Page 110 er w Po PTHFxxxxR-VM & PTKMxxxxR-VM PTHF-VM & PTKM-VM s or ct du In SERIES Vertical Toroidal Power Chokes Physical Parameters Inches 0.025 0.250 ± 0.062 F (Standoffs) G (Lead length below standoff) Millimeters 0.635 6.35 ± 1.57 Other dimensions in table below Electrical Information on Preceding Page A Nominal 6.350 6.350 6.350 6.350 6.350 6.350 6.350 6.350 6.350 8.890 8.890 8.890 8.890 8.890 8.890 8.890 10.16 10.16 10.16 10.16 10.16 10.16 10.16 10.16 10.16 15.24 15.24 15.24 15.24 15.24 15.24 15.24 15.24 15.24 0.036 0.032 0.028 0.025 0.025 0.020 0.018 0.018 0.018 0.040 0.040 0.036 0.032 0.028 0.025 0.023 0.051 0.051 0.045 0.040 0.036 0.036 0.032 0.028 0.025 0.051 0.051 0.051 0.051 0.045 0.040 0.032 0.032 0.028 m m 0.250 0.250 0.250 0.250 0.250 0.250 0.250 0.250 0.250 0.350 0.350 0.350 0.350 0.350 0.350 0.350 0.400 0.400 0.400 0.400 0.400 0.400 0.400 0.400 0.400 0.600 0.600 0.600 0.600 0.600 0.600 0.600 0.600 0.600 es ch In 19.68 19.68 19.68 19.68 19.68 19.68 19.68 19.68 19.68 24.13 24.13 24.13 24.13 24.76 24.76 24.76 29.84 29.84 29.84 29.84 29.84 29.84 31.75 31.75 31.75 35.56 35.56 35.56 35.56 35.56 35.56 37.46 37.46 37.46 E Nominal m m 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.950 0.950 0.950 0.950 0.975 0.975 0.975 1.175 1.175 1.175 1.175 1.175 1.175 1.250 1.250 1.250 1.400 1.400 1.400 1.400 1.400 1.400 1.475 1.475 1.475 es ch In 10.16 10.16 10.16 10.16 10.16 10.16 10.16 10.16 10.16 12.70 12.70 12.70 12.70 12.70 12.70 12.70 17.40 17.40 17.40 17.40 17.40 17.40 17.40 17.40 17.40 20.95 20.95 20.95 20.95 20.95 20.95 20.95 20.95 20.95 D Nominal m m 0.400 0.400 0.400 0.400 0.400 0.400 0.400 0.400 0.400 0.500 0.500 0.500 0.500 0.500 0.500 0.500 0.685 0.685 0.685 0.685 0.685 0.685 0.685 0.685 0.685 0.825 0.825 0.825 0.825 0.825 0.825 0.825 0.825 0.825 es ch In 19.05 19.05 19.05 19.05 19.05 19.05 19.05 19.05 19.05 20.32 20.32 20.32 20.32 20.32 20.32 20.32 30.73 30.73 30.73 30.73 30.73 30.73 30.73 30.73 30.73 36.83 36.83 36.83 36.83 36.83 36.83 36.83 36.83 36.83 C Nominal m m 0.750 0.750 0.750 0.750 0.750 0.750 0.750 0.750 0.750 0.800 0.800 0.800 0.800 0.800 0.800 0.800 1.210 1.210 1.210 1.210 1.210 1.210 1.210 1.210 1.210 1.450 1.450 1.450 1.450 1.450 1.450 1.450 1.450 1.450 es ch In m m es ch In RT PA R E MB NU PT**10-50VM PT**25-50VM PT**50-50VM PT**75-50VM PT**100-50VM PT**150-50VM PT**200-50VM PT**250-50VM PT**330-50VM PT**10-121VM PT**25-121VM PT**50-121VM PT**75-121VM PT**100-121VM PT**150-121VM PT**250-121VM PT**10-59VM PT**25-59VM PT**50-59VM PT**75-59VM PT**100-59VM PT**150-59VM PT**250-59VM PT**500-59VM PT**750-59VM PT**25-894VM PT**50-894VM PT**75-894VM PT**100-894VM PT**150-894VM PT**250-894VM PT**500-894VM PT**750-894VM PT**1000-894VM B Nominal 0.914 0.813 0.711 0.635 0.635 0.508 0.457 0.457 0.457 1.016 1.016 0.914 0.813 0.711 0.635 0.584 1.295 1.295 1.143 1.016 0.914 0.914 0.813 0.711 0.635 1.295 1.295 1.295 1.295 1.143 1.016 0.813 0.813 0.711 **Insert HF or KM for complete Part Number *Complete part # must include series # PLUS the dash # For surface finish information, refer to www.delevanfinishes.com 270 Quaker Rd., East Aurora NY 14052 • Phone 716-652-3600 • Fax 716-652-4814 • E-mail: [email protected] • www.delevan.com 1/2009