VER : PA_1 update : 2012.05.10 LED Power APF100 SERIES 100 Watts KEY FEATURES Fully Isolated Plastic Case with IP67 Level Universal Input: 90-305 VAC or 120-430 VDC Three in one dimming function (1~10VDC & PWM Signal or resistance) Bulit-in Active PFC Function Free Air Convection High Reliability With Constant Current & Constant Voltage Output Voltage and Constant Current Level can Be Adjusted Through Internal Potential Meter Isolation Class II LED Power Application 3-Years Product Warranty ELECTRICAL SPECIFICATIONS Model No. APF100-12S 100W Max Output Wattage (W) Voltage Output Protection Isolation APF100-48S APF100-54S 47-63 Hz Current (Full load) 1.5 A max. (115 VAC) / 0.7 A max. (230 VAC) / 0.6 A max. (277 VAC) Inrush Current (<2ms) 40 A max. (115 VAC) / 60 A max. (230 VAC) Leakage Current <0.75 mA max. Power Factor PF>0.97 (115 VAC) / PF>0.9 (230 VAC) at Full Load Voltage (V.DC.) 12V 24V 36V 48V 54V Constant Current Range (V.DC.) 6 ~ 12V 12 ~ 24V 18 ~ 36V 24 ~ 48V 27 ~ 54V Voltage Accuracy ±2% Current (Convection) (mA) max 8333 4166 2777 2083 1852 Current ADJ Range (mA) 4166 ~ 8333 2083 ~ 4166 1388 ~2777 1041 ~ 2083 926 ~ 1852 Line Regulation ±1% Load Regulation ±1% Minimum Load 1% Maximum Capacitive Load 100,000 uF 50,000 uF 8,000 uF 4,000 uF 3,000 uF Ripple & Noise (max.) 100mVp-p 100mVp-p 100mVp-p 200mVp-p 200mVp-p Efficiency (typ.) 89% 91.5% 91.5% 91.5% 91.5% Hold-up Time 25 ms min. Switching Frequency 100 kHz Over Power Protection Auto recovery Over Voltage Protection Auto recovery Overt Temperature Protection Auto recovery Short Circuit Protection Auto recovery Input-Output (V.AC) 3750V Input-FG (V.AC) 1880V Output-FG .(V.AC) Operating Temperature Environment APF100-36S 90-305 VAC or 120-430 VDC Frequency (Hz) Input APF100-24S 500V -30°C…+70°C (with derating) Storage Temperature -40°C…+85°C Temperature Coefficient ±0.02%/°C ( 0~50°C ) Humidity 95% RH MTBF >100,000 h @ 25°C (MIL-HDBK-217F) Vibration 10~500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes. 1. All specifications valid at normal input voltage, full load and +25°C after warm-up time unless otherwise stated. 2. Ripple & Noise are measured at 20MHz of bandwidth with 0.1uF & 47uF parallel capacitor. http://www.archcorp.com.tw TEL: +886-2-26989508 FAX: +886-2-26981319 -1- VER : PA_1 update : 2012.05.10 LED Power APF100 SERIES 100 Watts Model No. APF100-12S APF100-24S APF100-36S APF100-48S 6.44 x 2.79 x 1.50 Inches (163.7 x 71.0 x 38.0 mm ) Tolerance ±0.5 mm Dimension (L x W x H) Physical Safety g Weight Cooling Method Free air convection Agency Approvals EN61347-1:2008、 EN61347-2-13:2006 EMI EN 55015 (Pending) EMS (Noise Immunity) EN 61547 (Pending) Surge 2KV L-L, 4KV L-E (Conducted & Radiated Emission) EMC APF100-54S (Pending) 1. All specifications valid at normal input voltage, full load and +25°C after warm-up time unless otherwise stated. 2. Ripple & Noise are measured at 20MHz of bandwidth with 0.1uF & 47uF parallel capacitor. MECHANICAL DIMENSION ( Top View ) DERATING http://www.archcorp.com.tw TEL: +886-2-26989508 FAX: +886-2-26981319 BLOCK DIAGRAM -2-