IAD170P Integrated Circuits Load Voltage Load Current Max RON IAD170P 350 100 50 Description The IAD170P multifunction switch combines 350V, 100mA, 50Ω relay(s) and optocoupler(s) into a single package. Various combinations are available depending on the part number. This switch provides an ideal way to consolidate functionality into a single package. Units V mA Ω Features • Three Functions in One Package • Small 16 Pin SOIC Package (PCMCIA Compatible) • Bi-Directional Current Sensing • Bi-Directional Current Switching • Replaces up to Three or Four Components • 3750VRMS Input/Output Isolation • FCC Compatible • No EMI/RFI Generation • Machine Insertable, Wave Solderable Applications • Telecommunications • Telecom Switching • Tip/Ring Circuits • Modem Switching (Laptop, Notebook, Pocket Size) • Hookswitch • Dial Pulsing • Ground Start • Ringer Injection • Instrumentation • Multiplexers • Data Acquisition • Electronic Switching • I/O Subsystems • Meters (Watt-Hour, Water, Gas) • Medical Equipment-Patient/Equipment Isolation • Security • Aerospace • Industrial Controls Approvals • Tape & Reel Versions Available • UL Recognized: File Number E76270 • CSA Certified: File Number LR 43639-12 • VDE Compatible • BSI Certified: • BS EN 60950:1992 (BS7002:1992) Certificate #:7969 • BS EN 41003:1993 Certificate #:7969 Ordering Information Part # IAD170P IAD170PTR Description 16 Pin SOIC (50/Tube) 16 Pin SOIC (1000/Reel) Pin Configuration IAD170P Pinout (N/C) (N/C) Switching Characteristics of Normally Closed (Form B) Devices 1 16 2 15 (Form A) 3 14 4 13 5 12 6 11 7 10 8 9 90% + (N/C) + 90% +10% TON TOFF Switching Characteristics of Normally Open (Form A) Devices 1. (N/C) 2. + LED - Relay Input 3. – LED - Relay Input 4. Emitter - Phototransistor #1 5. Collector - Phototransistor #1 6. Emitter - Phototransistor #2 7. Collector - Phototransistor #2 8. (N/C) 9. LED - Phototransistor +/– #2 10. LED - Phototransistor –/+ #2 11. LED - Phototransistor +/– #1 12. LED - Phototransistor –/+ #1 13. (N/C) 14. Output - Relay 15. Common - Relay 16. Output - Relay DS-IAD170P-R1 10ms CONTROL www.clare.com 10ms CONTROL + 90% LOAD 10%+ 10%+ TON TOFF 1 IAD170P Absolute Maximum Ratings (@ 25˚ C) Parameter Min - - 11 3750 - - VRMS Operational Temperature -40 - +85 °C Storage Temperature -40 - +125 °C - - +220 °C Total Package Dissipation Isolation Voltage Input to Output Soldering Temperature (10 Seconds Max.) 1 Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this data sheet is not implied. Exposure of the device to the absolute maximum ratings for an extended period may degrade the device and effect its reliability. Typ Max Units W Above 25˚ derate linerity 1.67mw/˚C Electrical Characteristics Parameter Conditions Symbol Min Typ Max Units - VL - - 350 V Relay Portion Output Characteristics @ 25°C Load Voltage (Peak) Load Current (Continuous) Peak Load Current On-Resistance Off-State Leakage Current - IL - - 100 mA 10ms ILPK - - 350 mA IL=100mA RON - - 50 Ω VL=350V; TJ=25°C ILEAK - - 1 µA Switching Speeds Turn-On Turn-Off IF=5mA, VL=10V IF=5mA, VL=10V TON TOFF - - 5 5 ms ms Output Capacitance VL=50V, f=1MHz - - 25 - pF Relay Portion Input Characteristics @ 25°C Input Control Current IL=100mA IF 5 - 50 mA Input Dropout Current IL=1mA IF 0.4 - - mA Input Voltage Drop IF=5mA VF 0.9 1.2 1.4 V Reverse Input Voltage - VR - - 5 V Reverse Input Current VR=5V IR - - 10 µA Detector Portion Output Characteristics @ 25°C Phototransistor Blocking Voltage IC=10µA BVCEO 20 50 - V VCE=5V, IF=0mA ICEO - 50 500 nA Saturation Voltage IC=2mA, IF=16mA VSAT - 0.3 0.5 V Current Transfer Ratio IF=6mA, VCE=0.5V CTR 33 - - % IC=2mA,VCE=0.5V IF 6 2 - mA Phototransistor Dark Current Detector Portion Input Characteristics @ 25°C Input Control Current Input Voltage Drop IF=5mA ICEO 0.9 1.2 1.4 V Input Current (Detector must be off) IC=1µA, VCE=5V - 5 25 - µA Input to Output Capacitance VL=50V, f=1MHz CI/O - 3 - pF - VI/O 3750 - - VRMS Input to Output Isolation 2 www.clare.com Rev. 1 IAD170P PERFORMANCE DATA* 35 IAD170P Typical LED Forward Voltage Drop (N=50 Ambient Temperature = 25°C) IF = 5mADC IAD170P Typical On-Resistance Distribution (N=50 Ambient Temperature = 25°C) (Load Current = 100mADC) IAD170P Typical Blocking Voltage Distribution (N=50 Ambient Temperature = 25°C) 25 25 20 20 25 20 15 10 5 0 Device Count (N) Device Count (N) 15 10 5 1.19 1.21 1.23 1.25 424.0 429.3 434.5 439.7 444.9 450.1 455.4 Blocking Voltage (V) IAD170P Typical Turn-On Time (N=50 Ambient Temperature = 25°C) (Load Current = 100mADC) IAD170P Typical IF for Switch Dropout (N=50 Ambient Temperature = 25°C) (Load Current = 100mADC) 25 25 20 20 20 15 10 5 0 Device Count (N) 25 Device Count (N) 15 10 5 0.50 0.56 0.62 0.69 0.75 0.81 0.44 0.50 LED Current (mA) Load Current (mA) 20 15 10 5 0.56 0.62 0.69 0.75 0.67 0.81 0.22 160 0.016 140 0.014 120 0.012 100 80 10mA 5mA 2mA 60 40 0.25 0 20 40 60 80 100 -40 120 Turn-On (ms) 445 440 435 430 1.20 1.00 10mA 0.80 20mA 0.60 0.40 425 0.20 0 420 20 40 0 60 Temperature (°C) 80 100 -40 -20 0 20 40 60 20 40 60 80 100 IAD170P Typical Turn-Off vs. Temperature (Load Current = 120mADC) 1.40 0 -20 Temperature (°C) 5mA 1.60 -20 0.006 0 -20 1.80 450 1.14 0.008 IAD170P Typical Turn-On vs. Temperature (Load Current = 100mADC) 455 1.06 0.010 Temperature (°C) IAD170P Typical Blocking Voltage vs. Temperature 0.99 0.002 -40 0.28 0.91 0.004 Turn-Off (ms) -40 0.83 IAD170P Typical Leakage vs. Temperature (Measured across Pins 4 & 6) 0 0 0.19 0.75 Turn-On (ms) 20 0.17 5 IAD170P Typical Load Current vs. Temperature 25 0.14 10 LED Current (mA) IAD170P Typical Turn-Off Time (N=50 Ambient Temperature = 25°C) (Load Current = 100mADC) 0.11 15 0 0 0.44 80 100 120 Temperature (°C) Turn-Off (ms) Device Count (N) 5 On-Resistance (Ω) IAD170P Typical IF for Switch Operation (N=50 Ambient Temperature = 25°C) (Load Current = 100mADC) Device Count (N) 10 29.09 29.86 30.63 31.40 32.16 32.93 33.70 LED Forward Voltage Drop (V) Blocking Voltage (VRMS) 15 0 0 1.17 Leakage (µA) Device Count (N) 30 0.50 0.45 0.40 0.35 0.30 0.25 0.20 0.15 0.10 0.05 0 -40 -20 0 20 40 60 80 100 120 Temperature (°C) The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. Rev. 1 www.clare.com 3 IAD170P PERFORMANCE DATA* IAD170P Typical Turn-On vs. LED Forward Current (Load Current = 100mADC) 1.4 Turn-On (ms) 1.6 50mA 30mA 20mA 10mA 5mA 1.2 1.0 0.8 -40 -20 0 20 40 60 80 100 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 0 120 5 10 25 30 35 40 45 50 0 5.0 50 40 30 20 4.0 3.0 2.0 10 1.0 0 0 20 40 60 80 LED Current (mA) 6.0 5.0 LED Current (mA) 6.0 0 100 120 Load Current (A) 100 80 60 40 20 0 -20 -40 -60 -80 -100 -3 -2 -1 0 1 2 3 4 -20 0 25 30 35 40 45 50 4.0 3.0 2.0 20 40 60 80 100 120 -40 -20 0 20 40 60 80 100 120 Temperature (°C) Temperature (°C) IAD170P Energy Rating Curve IAD170P Typical Normalized CTR vs Forward Current (VCE = 0.5V) 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 10µs 100µs 1ms 10ms 100ms 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 10s 100s 1s Time Load Voltage (V) IAD170P Typical Normalized CTR vs. Temperature (VCE = 0.5V) 20 0 -40 IAD170P Typical Load Current vs. Load Voltage (Ambient Temperature = 25°C) IF = 5mADC 15 1.0 Temperature (°C) -4 10 IAD170P Typical IF for Switch Dropout vs. Temperature (Load Current = 100mADC) 60 -20 5 LED Forward Current (mA) 70 -40 Load Current (mA) 20 IAD170P Typical IF for Switch Operation vs. Temperature (Load Current = 100mADC) IAD170P Typical On-Resistance vs. Temperature (Load Current = 100mADC; IF = 5mADC) On-Resistance (Ω) 15 LED Forward Current (mA) Temperature (°C) 0 0 2 4 6 8 10 12 14 16 18 20 IF (mA) IAD170P Typical Collector Current vs Forward Current (VCE = 0.5V) 8 12 7 10 6 8 5 IC (mA) Normalized CTR (%) 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 Normalized CTR (%) LED Forward Voltage Drop (V) 1.8 IAD170P Typical Turn-Off vs. LED Forward Current (Load Current = 120mADC) Turn-Off (ms) IAD170P Typical LED Forward Voltage Drop vs. Temperature 4 3 2 1 0 -40 -20 0 20 40 60 Temperature (°C) 1mA 2mA 5mA 10mA 15mA 20mA 80 100 120 6 4 2 0 0 2 4 6 8 10 12 14 16 18 20 IF (mA) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com Rev. 1 IAD170P Mechanical Dimensions 16 Pin SOIC (“P” Suffix) 1.981 TYP. (.078) 2.108 MAX. (.083) 1.270 TYP. (.050) 7.493 ± .051 (.295 ± .002) 1.016 (.040) PC Board Pattern (Top View) 10.160 ± .051 (.400 ± .002) 7.493 ± .127 (.295 ± .005) 1.270 (.050) 10.363 ± .127 (.408 ± .005) 9.728 ± .051 (.383 ± .002) .254 (.010) 1.193 (.047) .406 TYP. (.016) 8.890 TYP. (.350) .787 (.031) Tape and Reel Packaging for 16 Pin SOIC Package 330.2 DIA. (13.00) 6.731 MAX. (.265) Top Cover Tape Thickness .102 MAX. (.004) 1.753 ± .102 (.069 ± .004) .406 MAX. (.016) 2.007 ± .102 1.498 ± .102 3.987 ± .102 (.079 ± .004) (.059 ± .004) (.157 ± .004) 7.493 ± .102 (.295 ± .004) 1 16 10.693 ± .025 (.421 ± .001) 12.090 (.476) 3.175 (.125) Top Cover Tape Embossed Carrier 16.002 ± .305 (.630 ± .012) .050R TYP. 11.989 ± .102 (.472 ± .004) 10.897 ± .025 (.429 ± .001) 1.549 ± .102 (.061 ± .004) User Direction of Feed Embossment Dimensions mm (inches) Rev. 1 www.clare.com 5 Worldwide Sales Offices CLARE LOCATIONS EUROPE ASIA/PACIFIC Clare Headquarters 78 Cherry Hill Drive Beverly, MA 01915 Tel: 1-978-524-6700 Fax: 1-978-524-4900 Toll Free: 1-800-27-CLARE European Headquarters CP Clare nv Bampslaan 17 B-3500 Hasselt (Belgium) Tel: 32-11-300868 Fax: 32-11-300890 Clare Micronix Division 145 Columbia Aliso Viejo, CA 92656-1490 Tel: 1-949-831-4622 Fax: 1-949-831-4628 France Clare France Sales Lead Rep 99 route de Versailles 91160 Champlan France Tel: 33 1 69 79 93 50 Fax: 33 1 69 79 93 59 Asian Headquarters Clare Room N1016, Chia-Hsin, Bldg II, 10F, No. 96, Sec. 2 Chung Shan North Road Taipei, Taiwan R.O.C. Tel: 886-2-2523-6368 Fax: 886-2-2523-6369 SALES OFFICES AMERICAS Americas Headquarters Clare 78 Cherry Hill Drive Beverly, MA 01915 Tel: 1-978-524-6700 Fax: 1-978-524-4900 Toll Free: 1-800-27-CLARE Eastern Region Clare P.O. Box 856 Mahwah, NJ 07430 Tel: 1-201-236-0101 Fax: 1-201-236-8685 Toll Free: 1-800-27-CLARE Central Region Clare Canada Ltd. 3425 Harvester Road, Suite 202 Burlington, Ontario L7N 3N1 Tel: 1-905-333-9066 Fax: 1-905-333-1824 Western Region Clare 1852 West 11th Street, #348 Tracy, CA 95376 Tel: 1-209-832-4367 Fax: 1-209-832-4732 Toll Free: 1-800-27-CLARE Canada Clare Canada Ltd. 3425 Harvester Road, Suite 202 Burlington, Ontario L7N 3N1 Tel: 1-905-333-9066 Fax: 1-905-333-1824 Germany Clare Germany Sales ActiveComp Electronic GmbH Mitterstrasse 12 85077 Manching Germany Tel: 49 8459 3214 10 Fax: 49 8459 3214 29 Italy C.L.A.R.E.s.a.s. Via C. Colombo 10/A I-20066 Melzo (Milano) Tel: 39-02-95737160 Fax: 39-02-95738829 Sweden Clare Sales Comptronic AB Box 167 S-16329 Spånga Tel: 46-862-10370 Fax: 46-862-10371 United Kingdom Clare UK Sales Marco Polo House Cook Way Bindon Road Taunton UK-Somerset TA2 6BG Tel: 44-1-823 352541 Fax: 44-1-823 352797 http://www.clare.com Clare cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in this Clare product. No circuit patent licenses nor indemnity are expressed or implied. Clare reserves the right to change the specification and circuitry, without notice at any time. The products described in this document are not intended for use in medical implantation or other direct life support applications where malfunction may result in direct physical harm, injury or death to a person. Specification: DS-IAD170P-R1 ©Copyright 2000, Clare, Inc. All rights reserved. Printed in USA. 2/23/01