6 5 4 3 2 1 D D USB Insulator (Portion 2) Cable Fitting Metal Version USB Insulator (Portion 1) USB Type A Plug Housing (Metallized ABS) USB Metal Shell (Portion 2) Coupling Ring Die-Cast Version Bayonet Locking Type USB Metal Shell (Portion 1) 17.9 REF. Key Protrusion x 3 C C 21 17.9 REF. HEX FLATS n31.5 Notes: B 1. Electrical Specifications: - Meets USB 2.0 Specification - Contact Resistance: 30 mOhm max. - Insulation Resistance: 1000 MOhm min. @ 100 VDC B Interfacial Seal 61.8 REF. - Current Rating: 1.5 A max. at 25~C - Working Voltage: 30 V (RMS) max. - DWV: 500 VAC/60s at sea Level 6 5 4 DOT NOT ALTER CAD DRAWING BY HAND Directive 2002/95/EC "RoHS" Compliant THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC CORPORATION A - Operating Temperature: -40~C to +85~C 2. Material and Finish: - Coupling Ring: Zinc Die-Cast, Nickel Plated - USB Plug Housing: ABS, UL94 V-0, Nickel Plated - Interfacial Seal: Silicone, Color: White - Cable Fitting: Brass, Nickel Plated - Cable Fitting Rubber Ring: NBR, Color: Black - USB Metal Shell: SPCC, Nickel Plated - USB Insulator: PBT, UL94 V-0, White - USB Contacts: Copper Alloy, - USB Contact Finish: 30 u" Gold min. over Nickel for mating area, Tin over Nickel for solder cup 3. USB Type A Plug accepts AWG28 to AWG24 wires, Cable with outer Diameter of 4.06 mm to 5.21 mm 4. Cable Fitting accepts Cable Outer Diameter Range of 4 mm to 8 mm 5. RoHS compliant 6. IP67 rated when fully mated with appropriate mating connector Customer: Name Tolerance Title Approval Date 0 PLC 1 PLC 2 PLC 3 PLC ANGLES `0.50 `0.38 `0.25 `0.10 Autodesk Inventor `3~ Material: See Notes Title: 2010 Date Name Draw. Mar. 16 Vincent Ke Appd. Mar. 16 J. Chaudry D-old R original Rev. 3 Changes Date Die-Cast IP67 USB Plug Kit A with USB 2.0 Type A Plug Solder Cup Version Norm a Dim. in mm Scale: 1.5:1 Unless otherwise specified DIN Drawing No.: 17K1A154 A3 Sheet Part No.: 17-200591 Name 2 1/1 1