Close-up of CAB.942 CAB.942 Specification Part No. CAB.942 Product Name CAB.942 Taoglas Low Loss Cable Assembly N Type Jack with O-Ring to 7620mm (25’) CFD-200 to SMA(M) SPE-13-8-054/A/WY | page 1 of 5 1. Cable Insertion Loss 0 -5 -10 (dB) -15 CAB.942 -20 -25 -30 -35 -40 500 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 2300 2400 2500 2600 2700 2800 2900 3000 (MHz) 2. CFD-200 Cable Specification 2.1 Drawing - Cross Section Jacket Braid Shield Braid Shield Conductor Insulation SPE-13-8-054/A/WY | page 2 of 5 2.2 Structure and Dimensions Conductor Insulation Braid Shield Braid Shield Jacket • Material - Bare Copper Wire • Material - Gas Injected Foam Polyethylene • Material - Aluminium Foil • Material - Tinned - Copper Wire • Material - RoHS PVC • Construction 0.038mm • Structure 16/6/0.12mm • Diameter - 4.95 ± 0.10mm • Coverage - 87% • Colour - Black • Composition (1/1.12mm) • Diameter - 1.12mm • Avg. Thickness - 0.91mm • Diameter - 2.95±0.1mm • Diameter - 0.12± 0.008mm 2.3 Electrical & Physical Specification The Characteristic of CFD-200 Coaxial Cable 1000 MΩ-Km (Min) Insulation Resistance: Capacitance 80.4 ± 3 pF/m Nom. Impedance 50 ± 3 Ω Attenuation 500MHz 24.1 (dB / 100M) 1000MHz 34.4 1500MHz 42.4 2000MHz 49.3 2500MHz 55.4 3000MHz 60.9 SPE-13-8-054/A/WY | page 3 of 5 SMA(M) ST N Type(F) ST 3. Technical Drawing O-Ring 3.1 CAB.942 NOTES: 1.All material must be RoHS compliant. 2.Open/short, insertion loss QC required. Material Part No. Name Finish 1 SMA(M) ST SMA.M.ST.PLUG.G.J Brass Gold 2 CFD-200 CFD.200.J PVC Jacket Black 3 Heat Shrink Tube 001311F0100XXA PE Black 4 N Type(F) ST N.TYPE.F.BKO.ST.JACK.G.J QTY 1 1 2 Name Material Finish QTY 1 SMA(M)ST Brass Gold 1 2 CFD-200 PVC Jacket Black 3 Heat Shrink Tube PE TW Design Centre Black 2 This drawing and its inherent design concepts are property of Taoglas. Not to 4 N Type(F) ST Brass Ni Plated Brass Ni Plated 1 1 be copied or given to third parties without the written consent of Taoglas. B 1 SPE-13-8-054/A/WY | page 4 of 5 3.2 Connectors <Release> A ALL B A2 Initial Design Sandy Joanna 2012/04/26 Amend TITLE Sandy Joanna 2012/06/07 SMA(M) ST N Type(F) ST O-Ring NOTES: 1.All material must be RoHS compliant. 2.Open/short, insertion loss QC required. Name Part No. Material Finish QTY 1 SMA(M) ST SMA.M.ST.PLUG.G.J Brass Gold 1 2 CFD-200 CFD.200.J PVC Jacket Black 1 3 Heat Shrink Tube 001311F0100XXA PE Black 2 4 N Type(F) ST N.TYPE.F.BKO.ST.JACK.G.J Brass Ni Plated 1 TW Design Centre SPE-13-8-054/A/WY | This drawing and its inherent design concepts are property of Taoglas. Not to be copied or given to third parties without the written consent of Taoglas. B page 5 of 5