M12 Field Attachable Field attachable connectors from CONEC provides the freedom and flexibility to react to any cabling situation on site. Choose between shielded or un-shielded , straight or angled versions. Built in accordance with IEC specifications. Features and Benefits Technical Specifications • • • • • • • Material & Finishes: Contact: Copper alloy; gold over nickel Contact carrier: PA6, UL94 Housing: PA6 GF, UL94 (std) Shielded: Die Cast, nickel plated • Coupling Nut: Stainless steel • O-ring: FPM • • • IP67 in mated condition High performance machined contacts Anti-vibration coupling nut Shielded or un-shielded Straight & right angle male or female versions 4 & 5 position Screw type or clamp termination Cable diameter 6 or 8 mm Rugged and easy to assemble Applications Industrial Automation • Machine Tool Plants Food & Beverage • Automotive Assembly & Handling Equipment • Robotics Motion Controls • Packaging Equipment • • • • • • • • • Rated Voltage: 4-pos 250V; 5-pos 60V Current Rating: 4 Amps at +40º C Pollution Degree 3/2 Insulation Resistance: 10 G Ω Temperature Range: -30ºC to +85ºC Mating Cycles: ≤100 18 AWG • • • • For additional information regarding this product contact the Conec technical support staff: Peter Persico 919-460-8800 ([email protected]). CONEC ▪ 343 Technology Drive ▪ Garner, NC ▪ 919-460-8800 ▪ www.conec.com