UM7000 / UM7100 / UM7200 HIGH POWER PIN DIODES ® TM RoHS Compliant Versions Available KEY FEATURES The UM7000 and UM7100 series offer moderately high power handling in combination with reasonably low levels of both series resistance and capacitance. The UM7200 series offers the lowest series resistance, but the highest capacitance of the group. The differences in specified performance for each of the series, results from different I-region thickness. The three series have broad applicability in many RF and microwave switch and attenuator circuits. Additionally, the UM7100 in leaded versions is usually the most cost-effective diode choice in high volume usage. Voltage ratings to 1000V (UM7000) Average power dissipation to 10 W Series resistance as low as 0.25 Ω Carrier lifetime greater than 2.5 µs Low capacitance Low conductance (High RP) Compatible with automated assembly www.MICROSEMI.com DESCRIPTION RoHS compliant packaging 1 Available (Use UMX7202B, etc.) IMPORTANT: For the most current data, consult MICROSEMI’s website: www.MICROSEMI.com 1 The UM7000 series of products can be supplied with a RoHS compliant finish (UMX7000) or with a 90/10 Sn/Pb finish. Stud Packages C/CR/D/DR are supplied with a RoHS complaint Gold finish Consult factory for details. ABSOLUTE MAXIMUM RATINGS AT 25º C (UNLESS OTHERWISE SPECIFIED) Package Conditions O A 25 C Pin Temperature B ½ in. total length to 25 C Contact Free Air E O (PD ) Power Dissapation (W) ( Θ )Thermal Resistance ( OC/W) 10 15V 5.5 27.5 1.5 10 15 O 7.5 20 O 8 17 100KW 60 kW 35 kW 20 kW 25 C Stud Temperature D 25 C Stud Temperature SM 25 C End Cap Temperature ALL 1 us pulse (Single) ALL Storage Temperature (TOP) -65 OC to + 175 OC ALL Operating Temperature (TOP) -65 OC to + 175 OC Copyright 2006 Rev.: 2009-01-19 Microsemi Microwave Products 75 Technology Drive, Lowell, MA. 01851, 978-442-5600, Fax: 978-937-3748 UM700/UM7100/UM7200 O C APPLICATIONS/BENEFITS Isolated stud package available Surface mount package available Soldering temperature: o 260 C for 10 seconds maximum Page 1 UM7000 / UM7100 / UM7200 HIGH POWER PIN DIODES ® TM RoHS Compliant Versions Available . ELECTRICAL PARAMETERS @ 25C (unless otherwise specified) Parameter Symbol Conditions UM7000 Reverse Current (Max) 10 10 UM7200 Units 0.6 uA Ohm 1.2 2.2 pF 200k 150k 70k Ohms 2.5 2.0 1.5 uS 150 80 40 um Series Resistance(Max) At rated voltage IF = 100 mA, F= 100 MHz 1.0 Capacitance (Max) CT VR = 100 V, F = 1 MHz 0.9 Parallel Resistance(Min) RP VR = 100 V, F = 100 MHz TL W IF = 10 mA - I-Region Width (Min) UM7100 10 0.25 IR RS Carrier Lifetime(Min) www.MICROSEMI.com VOLTAGE RATINGS @ 25C (unless otherwise specified) Part Number Reverse Voltage @ 10uA (V) UM7001 UM7101 UM7201 100 UM7002 UM7102 UM7202 200 UM7104 UM7204 400 UM7006 600 UM7108 800 UM7010 1000 See following pages for performance graphs and mechanical data. ELECTRICALS Copyright 2006 Rev.: 2009-01-19 Microsemi Microwave Products 75 Technology Drive, Lowell, MA. 01851, 978-442-5600, Fax: 978-937-3748 Page 2 UM7000 / UM7100 / UM7200 HIGH POWER PIN DIODES ® TM RoHS Compliant Versions Available TYPICAL RP VS VOLTAGE IF VS VF CAPACITANCE VS VOLTAGE www.MICROSEMI.com TYPICAL RS VS IF GRAPHS Copyright 2006 Rev.: 2009-01-19 Microsemi Microwave Products 75 Technology Drive, Lowell, MA. 01851, 978-442-5600, Fax: 978-937-3748 Page 3 UM7000 / UM7100 / UM7200 HIGH POWER PIN DIODES ® TM RoHS Compliant Versions Available TYPICAL RP VS VOLTAGE POWER RATING CAPACITANCE VS VOLTAGE www.MICROSEMI.com POWER RATING GRAPHS Copyright 2006 Rev.: 2009-01-19 Microsemi Microwave Products 75 Technology Drive, Lowell, MA. 01851, 978-442-5600, Fax: 978-937-3748 Page 4 UM7000 / UM7100 / UM7200 HIGH POWER PIN DIODES ® TM RoHS Compliant Versions Available www.MICROSEMI.com I/V VS TEMP TYPICAL RP VS VOLTAGE MEAN If VERSUS Vf CURVE VERSUS TEMPERATURE TYPICAL 10 1 100 If (A) 10-1 150C------------ 10-2 ---------------125C ---------------100C 10-3 10-4 --------------75C 10-5 -----25C 10-6 0.0 0.5 1.0 1.5 Vf (V) THERMAL IMPEDANCE CAPACITANCE VS VOLTAGE GRAPHS Copyright 2006 Rev.: 2009-01-19 Microsemi Microwave Products 75 Technology Drive, Lowell, MA. 01851, 978-442-5600, Fax: 978-937-3748 Page 5 UM7000 / UM7100 / UM7200 HIGH POWER PIN DIODES ® TM RoHS Compliant Versions Available PACKAGE STYLE ‘B’ PACKAGE STYLE ‘C’ PACKAGE STYLE ‘CR’ PACKAGE STYLE ‘D’ PACKAGE STYLE ‘DR’ www.MICROSEMI.com PACKAGE STYLE ‘A’ MECHANICAL Copyright 2006 Rev.: 2009-01-19 Microsemi Microwave Products 75 Technology Drive, Lowell, MA. 01851, 978-442-5600, Fax: 978-937-3748 Page 6 UM7000 / UM7100 / UM7200 HIGH POWER PIN DIODES ® TM RoHS Compliant Versions Available PACKAGE STYLE ‘E’ PACKAGE STYLE ‘SM’ www.MICROSEMI.com STYLE ‘SM’ FOOTPRINT NOTES: 1 2 These dimensions will match the terminals and provide for additional solder fillets at the outboard ends at least as wide as the terminals themselves, assuming accuracy of placement within 0.005” If the mounting method chosen requires use of an adhesive separate from the solder compound, a round (or square) spot of cement as shown should be centrally located. MECHANICAL Copyright 2006 Rev.: 2009-01-19 Microsemi Microwave Products 75 Technology Drive, Lowell, MA. 01851, 978-442-5600, Fax: 978-937-3748 Page 7