CPI-MPP provides an extensive line of gyrotrons that generate frequencies from 28 to 263 GHz with power levels ranging from 25 W to 1.4 MW. High power, long-pulse/CW gyrotrons are employed primarily for fusion plasma heating and current-drive. Lower-power devices are employed for a wide variety of scientific, industrial, and defense applications. The VGY-8026 gyrotron delivers 25 W of continuous output power at a frequency of 263 GHz, and allows for frequency tuning of ±50 MHz relative to the nominal center frequency. For additional information on gyrotrons, other CPI products, or a copy of our catalog-on-disk, please contact: CPI Microwave Power Products, 811 Hansen Way, Palo Alto, CA 94303-0750 Telephone: 650-846-3172, Fax: 650-856-0705, Email: [email protected] Page 1 of 2 Rev: 2012-03-15 Output Power vs. Cathode Voltage VacIon Pump Collector Output Window Internal Mode Converter Output Power vs. Beam Current TE03 Interaction Circuit Diode Electron Gun Features • • • • • Continuous wave (CW) operation Stable output power and frequency (requires suitable control system) ±50 MHz frequency tuning Diode electron gun Operates in a 10 Tesla superconducting magnet with a Ø3.5” (89mm) warm bore Typical Operating Parameters Power Output > 25 W Pulse Length CW Cath. Voltage (Nom.) 10-15 kV Cath. Voltage (Max) 25 kV Beam Current (Nom.) ~50 mA Beam Current (Max) 150 mA Frequency 263 GHz Efficiency 1-10% Output Mode TEM00 For additional information on gyrotrons, other CPI products, or a copy of our catalog-on-disk, please contact: CPI Microwave Power Products, 811 Hansen Way, Palo Alto, CA 94303-0750 Telephone: 650-846-3172, Fax: 650-856-0705, Email: [email protected] Page 2 of 2 Rev: 2012-03-15