CPI Microwave Power Products (MPP) offers high power klystron for particle accelerator applications. The VKP-7953B is rated for 100 kW CW at 500 MHz. Key Features • • • • Five Integral Cavities Electron gun with modulating anode for beam current adjustment Water cooled collector, capable of 150 psig inlet pressure. Water cooled coaxial to waveguide adapter. Typical Operating Parameters Power Output 100 Heater Voltage 7.7 Heater Current 20 Beam Voltage 28.5 Beam Current 7.25 Mod Anode Voltage 25 Body Current 100 Frequency 499.665 1dB Bandwidth ± 1.5 Efficiency 50 Collector Coolant Flow 60 Body water Flow 2.5 Electron Gun Cooling (air) 200 Collector Hydrostatic Pressure 150 Body Hydrostatic Pressure 100 Electromagnet: Series connected 5 coils electromagnet Current 35 Voltage 120 Weight 500 Size: Height Weight 68 440 kW CW V (max) A (max) kVdc (max) A (max) kVdc (max) mA (max) MHz MHz (min) % (min) gpm (min) gpm (min) lb/hr (min) psig (max) psig (max) A (max) Vdc lbs inches lbs RF Output Connector: Mates to EIA 3 1/8 Inch, 50 ohm rotate able flange with water cooled output coupler to WR-1800 waveguide For information on Super Power Klystrons and other CPI MPP products, visit our website at www.cpii.com/mpp, or contact: CPI Microwave Power Products Division, 607 Hansen Way, Palo Alto, CA 94303 Telephone: 650-846-3900, Fax: 650-856-0705, Email: [email protected] Output Power (kW) 100 497.1 80 502.5 60 BW = ±2.7 MHz 40 EB = 28.0 kV IB = 7.12 A Pd = 7.63 W 20 TD5659 499.66 FREQUENCY MHz 100 Output Power (kW) 80 F = 499.66 MHz EB = 28.0 kV I B = 7.12A 60 40 20 1.5 3.0 4.5 6.0 7.5 9.0 10.5 12.0 13.5 TD5660 RF Input Power (W) For information on Super Power Klystrons and other CPI MPP products, visit our website at www.cpii.com/mpp, or contact: CPI Microwave Power Products Division, 607 Hansen Way, Palo Alto, CA 94303 Telephone: 650-846-3900, Fax: 650-856-0705, Email: [email protected]