SeriesOne DR Series • Ratings of 6 & 12 Amps • Load voltage ratings of 2-60VDC, 2-100VDC, 24-280VAC and 48-600VAC • Fits standard 35mm DIN-RAIL • LED input status indicator • AC or DC control • Zero-crossing (resistive loads) or random turn-on (inductive loads) output • UL and cUL Recognized, CE & RoHS Compliant • 100K-cycle UL 508 Endurance Rating for Enhanced Reliability PRODUCT SELECTION Description 4-32 VDC Control 90-140 VAC Control 208-265 VAC Control 18-36 VAC Control 280V, 6A 280V, 12A 600V, 6A 600V, 12A 60V, 6A 60V, 12A 100V, 6A 100V, 12A DR24D06 DR24B06 DR24A06 DR24E06 DR24D12 DR24B12 DR24A12 DR24E12 DR48D06 DR48D12 DR48B12 DR48A12 DR48E12 DR06D06 DR06D12 DR10D06 DR100D12 AVAILABLE OPTIONS OUTPUT SPECIFICATIONS AC Output (1) Description Operating Voltage (47-63Hz) [Vrms] Transient Overvoltage [Vpk] Maximum Load Current, resistive [Arms] (2) Minimum Load Current [Arms] Maximum Off-State Leakage Current @ Rated Voltage [mArms] Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] (3) Maximum On-State Voltage Drop @ Rated Current [Vpk] Maximum Surge Current (50/60 Hz, 1 cycle) [Apk] Maximum I²t for Fusing (50/60 HZ, 1/2 cycle) [A² sec] HP Rating @ 240V Minimum Power Factor (with Maximum Load) Min/Max stranded wire Min/Max solid wire Weight (typical) DR24x06 DR24x12 DR48X06 DR48x12 24-280 600 6 0.15 0.1 500 1.3 285/300 410/375 1/6 0.5 22/14 AWG 22/14 AWG 1.76 oz. (50g) 24-280 600 12 0.15 0.1 500 1.3 715/750 2560/2330 1/3 0.5 22/14 AWG 22/14 AWG 3.17 oz. (90g) 48-600 1200 6 0.15 0.1 500 1.3 285/300 410/375 1/6 0.5 22/14 AWG 22/14 AWG 1.76 oz. (50g) 48-600 1200 12 0.15 0.2 500 1.3 715/750 2560/2330 1/3 0.5 22/14 AWG 22/14 AWG 3.17 oz. (90g) OUTPUT SPECIFICATIONS DC Output (1) Description DR06D06 DR10D06 DR06D12 DR10D12 Operating Voltage [VDC] Maximum Load Current [Adc] (2) Minimum Load Current [mAdc] Maximum Off-State Leakage Current @ Rated Voltage [mA] Maximum On-State Voltage Drop @ Rated Current [Vpk] Maximum Surge Current (10ms) [Apk] On-State resistance at rated current [Ohms] Min/Max stranded wire Min/Max solid wire Weight (typical) 1-60 6 2.5 0.1 0.6 60 0.1 22/14 AWG 22/14 AWG 1.76 oz. (50g) 1-100 6 2.5 0.1 0.6 60 0.1 22/14 AWG 22/14 AWG 1.76 oz. (50g) 1-60 12 2.5 0.1 0.5 100 0.1 22/14 AWG 22/14 AWG 3.17 oz. (90g) 1-100 12 2.5 0.1 0.5 100 0.1 22/14 AWG 22/14 AWG 3.17 oz. (90g) Description DRxxDxx DRxxBxx DRxxAxx DRxxExx Control Voltage Range (4) Minimum Turn-On Voltage Minimum Turn-Off Voltage Minimum Input Current (5) Maximum Input Current (5) Maximum Turn-On Time (6) (7) Maximum Turn-Off Time (8) Min/Max stranded/solid wire 4.0-32 VDC 4.0 VDC 1.0 VDC 9 11 1/2 Cycle 1/2 Cycle 22/16 AWG 90-140 Vrms 90 Vrms 10 Vrms 3 5 20 msec 30 msec 22/16 AWG 200-265 Vrms 200 Vrms 90 Vrms 2.5 3.3 20 msec 30 msec 22/16 AWG 18-36 Vrms 18 Vrms 4 Vrms 3.5 8 20 msec 30 msec 22/16 AWG INPUT SPECIFICATIONS (1) GENERAL SPECIFICATIONS (1) Description Dielectric Strength, Input/Output/Base (50/60Hz) Minimum Insulation Resistance (@ 500 V DC) Maximum Capacitance, Input/Output Ambient Operating Temperature Range Ambient Storage Temperature Range Recommended Terminal Screw Torque Range: Parameters 4000Vrms 109 Ohms 10 pF -30ºC to 80ºC -30ºC to 100ºC 4.4-7.0 in lb (0.5-0.8 Nm) GENERAL NOTES 1) All parameters at 25°C unless otherwise specified. 2) See Derating Curves 3) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 4) DC control includes reverse polarity protection. 5) Input circuitry incorporates active current limiter. 6) Turn-on time for DC control random turn-on versions is 0.1 msec 7) Turn-on time for DC output 600µsec 8) Turn-off time for DC output 300µsec MECHANICAL SPECIFICATIONS WIRING DIAGRAM THERMAL DERATE INFORMATION AGENCY APPROVALS E116949 Rev 080910 ACCESSORIES