CMR48 Series • Ratings from 35A to 65A @ 530 VAC • 45mm (width) package • SCR output for heavy industrial loads • LED input status indicator • AC or DC control • Zero-crossing (resistive loads) or random-fire (inductive loads) output PRODUCT SELECTION Description 4-32 VDC Control 35 A 45 A 55 A 65 A CMRD4835 CMRD4845 CMRD4855 CMRD4865 90-140 VAC Control CMRA4835 CMRA4845 CMRA4855 CMRA4865 18-36 VAC Control CMRA4835E CMRA4845E CMRA4855E CMRA4865E AVAILABLE OPTIONS OUTPUT SPECIFICATIONS (1) Description Operating Voltage (47-63Hz) [Vrms] Transient Overvoltage [Vpk] 35A 45A 55A 65A 48-530 48-530 48-530 48-530 1200 1200 1200 1200 Maximum Off-State Leakage Current @ Rated Voltage [mArms] 10 10 10 10 Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] (2) 500 500 500 500 Maximum Load Current [Arms] 35 45 55 65 Minimum Load Current [Arms] 0.15 0.15 0.25 0.25 239/250 597/625 954/1000 1145/1200 1.7 1.7 1.7 1.7 Maximum 1 Cycle Surge Current (50/60Hz) [Apk] Maximum On-State Voltage Drop @ Rated Current [Vpk] Thermal Resistance Junction to Case (Rjc) [°C/W] Maximum 1/2 Cycle I² t for Fusing (50/60Hz) [A² sec] Minimum Power Factor (with Maximum Load) 1.02 0.63 0.31 0.28 285/259 1779/1621 4555/4150 6560/5976 0.5 0.5 0.5 0.5 INPUT SPECIFICATIONS (1) Description CMRD48xx CMRA48xx 4-32 VDC 90-140 Vrms Minimum Turn-On Voltage 4.0 VDC 90 Vrms Minimum Turn-Off Voltage 1.0 VDC 10 Vrms Maximum Reverse Voltage 32 VDC - Control Voltage Range Maximum Input Current 30 mA (4) - 14 mA @ 5 VDC 15 mA @ 120 Vrms Maximum Turn-On Time [msec] (3) 1/2 Cycle 10 Maximum Turn-Off Time [msec] 1/2 Cycle 40 Typical Input Current (4) GENERAL SPECIFICATIONS Description Parameters Dielectric Strength, Input/Output/Base (50/60Hz) 4000 Vrms Minimum Insulation Resistance (@ 500 V DC) 10 9 Ohms Maximum Capacitance, Input/Output 8 pF Ambient Operating Temperature Range -40 to 80˚C Ambient Storage Temperature Range -40 to 125˚C Status Indicator Display Weight (typical) Encapsulation Terminals Maximum Wire Size: Recommended Terminal Screw Torque Range: GENERAL NOTES 1) All parameters at 25°C unless otherwise specified. 2) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 3) Turn-on time for DC control random turn-on versions is 0.02 msec 4) Input circuitry version incorporates active current limiter. Green LED 16.8 oz. (476g) Themally Conductive Epoxy Cage Type Output: AWG 8 (4.8mm) Input: AWG 12(2.5mm) Output:10-15 in lb (1.1-1.7 Nm) Input: 5-6 in lb (0.6-0.7 Nm) MECHANICAL SPECIFICATIONS THERMAL DERATE INFORMATION AGENCY APPROVALS Designed in accordance with the requirements of IEC 62314 E116950 LR81689 126921 UG Rev. 110211 ANNEX - ENVIROMENTAL INFORMATION