MB2S Voltage Range 200 to 1000 Volts Current 0.5 Amperes SINGLE PHASE 0.5 AMPS. GLASS PASSIVATED BRIDGE RECTIFIERS MBS .193(4.90) .177(4.50) Features .033(0.84) .022(0.56) *Ideal for printed circuit board Reliable low cost construction utilizing molded plastic technique *High surge current capability *High temperature soldering guaranteed: 260OC / 10 seconds at 5 lbs.,(2.3kg) tension *Small size,simple installation *Leads solderable per MIL-STD-202 Method 208 .157(4.00) .142(3.60) ~ ~ + - .276(7.0) MAX .102(2.60) .087(2.20) .106(2.70) .090(2.30) Lead: .008(0.20) .118(3.0) MAX MAX .053(1.53) .037(0.95) .083(2.12) .043(1.10) .014(0.35) .006(0.15) .043(1.10) .028(0.70) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS o Rating at 25 C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximunm Average Forward Rectified Current at TA = 30oC On glass-epoxy P.C.B. On aluminum substrate Peak Forward Surge Current, 8.3 ms Single Half Sinewave Superimposed on Rated Load (JEDEC method) Maximum Instantaneous Forward Voltage Drop Per [email protected] VRRM VRMS VDC MB2S MB4S MB6S MB8S MB10S mb2s mb4s mb6s mb8s mb10s 200 400 600 800 1000 V 140 200 280 400 420 600 560 800 700 1000 V IF(AV) A IFSM 35 A VF 1.0 V IR 5.0 100 uA uA Typical Thermal Resistance Per Leg Operating Temperature Range R*JA 15 75 TJ -55 to +150 Storage Temperature Range TSTG -55 to +150 Typical Junction Capacitance Per Leg (Note3) V 0.5 0.8 o Maximun DC Reverse Current TA = 25 Co at Rated DC Blocking Voltage TA = 100 C UNITS CJ Note:1.On glass epoxy P.C.B mounted on 0.05x 0.05"(1.3x1.3mm)pads 2.On aluminum substrate P.C.B with on area of 0.8"x 0.8"(20x20mm) mounted on 0.05x 0.05"(1.3x1.3mm)solder pad 3.Measured at 1.0MHz and applied reverse valtage of 4.0 volts. pF o C/W o C o C