FEATURES / BENEFITS VEHICLE SPOT LIGHT (WITH AND WITHOUT OPTICS) IP67 rated, interior / exterior use Mounting holes located under snap on cover Typical 50,000 hour LED life Easy to install Low profile Typical 1.2 watt power consumption with use of external constant current driver APPLICATIONS MECHANICAL DIMENSIONS The single LED module can be used in stepwell, compartment and general illumination lighting applications. OPERATING CONDITIONS External constant current driver required Recommended input current 350mA Multiple modules can be connected in series for increased light output or longer runs off a single Base 8 20 28 42 supply. Ambient Temperature -20Cº to +55Cº (-4ºF to +131ºF) MOUNTING INFORMATION MATERIALS/FINISH Construction: Anodized Aluminum PRELIMINARY Dialight reserves the right to make changes at any time in order to supply the best product possible. Dialight Corporation 1501 Route 34 South • Farmingdale, NJ 07727 USA Tel: (1) 732-919-3119 • Fax: (1) 732-751-5778 • www.dialight.com MDTBLUMGU_01 VEHICLE SPOT LIGHT (WITH AND WITHOUT OPTICS) PART NUMBER SIZE DESCRIPTION 12284CB 1” round lens 2” round housing 12-24vdc dome 12294CB 1” round lens 2” round housing 12-24vdc eyelid 12304CB 1” round lens 2” round housing 12-24vdc flush mount 12314CB 1” round lens 2” round housing 12-24vdc 5 degree base spot 12324CB 1” round lens 2” round housing 12-24vdc 15 degree base spot 12334CB 1” round lens 2” round housing 12-24vdc 25 degree base spot 12344CB 1” round lens 2” round housing 12-24vdc oval base spot DRIVERS APPLICATION MLV3-C-35 1 - 3 Units MLV9-C-35 3 - 9 Units PRELIMINARY Dialight reserves the right to make changes at any time in order to supply the best product possible. Dialight Corporation 1501 Route 34 South • Farmingdale, NJ 07727 USA Tel: (1) 732-919-3119 • Fax: (1) 732-751-5778 • www.dialight.com MDTBLUMGU_01