DIALIGHT PART NUMBER 597-3029-202F 597-3029-207F 597-3209-202F 597-3209-207F 597-3329-202F 597-3329-207F 597-3409-202F 597-3409-207F 597-3609-202F 597-3609-207F 597-3909-202F 597-3909-207F PACKAGING SAMPLE STRIP RED 7" REEL SAMPLE STRIP ORANGE 7" REEL SAMPLE STRIP InGaN GREEN 7" REEL SAMPLE STRIP YELLOW 7" REEL SAMPLE STRIP BLUE 7" REEL SAMPLE STRIP WHITE 7" REEL .059 [1,5 ] TYP. CATHODE MARK LED COLOR RoHS COMPLIANT 597-3XX9-20XF Part Numbers with the "F" suffix ending are RoHS Compliant. For example: 597-3029-202F Reel and bag packaging are marked with "RoHS Compliant" label or equivalent markings. These parts can be used with RoHS reflow profile. Parts can be wave soldered, dip soldered or hand soldered using typical lead-free soldering process with max 260°C temp. for 5 sec. ECN NO REVISIONS A .090 [2,29] .031 [0,79] TYP. SEE NOTE 12 DRN CKD APP AJF KLJ NEW RELEASE 300 MAXIMUM SOLDER PROFILE RECOMMENDED SOLDER PROFILE MINIMUM SOLDER PROFILE C $ 255 C $ 240 C $ T 250 NO DATE 5-2-11 +0 C $ 260 C $-5 C$ 245 C $ #5 C$ +5 C $ C $ 235 C $-0 217 C $ .059 [1,5] 10s MIN 200 30s MAX 1 .145 [3,68] 3 2 4 .157 [3,99] 120s MAX .043 [1,09] SOLDER RESIST TYP. CU-AREA>16mm^2 .028 SCALE 4.000 PER PAD [0,71] (TOLERANCES: #.002") RECOMMENDED SOLDER PAD LAYOUT .069 [1,75] SCALE: 3.000 .083 -.091 [2,11 -2,31 ] .024 -.031 [0,60 -0,77 ] MAX. 2800 4500 2240 2240 710 2240 UNITS 50 25 C $ 0 100 50 0 1 .028 -.035 [0,70 -0,87 ] .004 [0,1] TYP. 2 IF = 50 mA .118 -.134 [3,0 -3,4 ] mcd 150 PAD 1 ANODE IF = 50 mA nm IF = 30 mA IF = 50 mA V IF = 30 mA DEGREES ABSOLUTE MAXIMUM RATINGS AT 25 C $ AMBIENT CONTINUOUS FORWARD CURRENT PEAK FORWARD CURRENT ( t <10 s, D=0.1 FOR RED, ORANGE, YELLOW; D=0.005 FOR InGaN GREEN, BLUE) LINEAR DERATING FROM 70 C $ FOR RED, ORANGE, YELLOW; 60 C $ FOR InGaN GREEN, BLUE, WHITE 300 .130 -.146 [3,31 -3,70 ] ESD PROTECTION DIODE 4 CATHODE MARK nm IF = 50 mA s PAD 2 ANODE IF = 30 mA IF = 30 mA 250 t 200 RECOMMENDED RoHS COMPLIANT REFLOW PROFILE TEST CONDITIONS 3 630 609 595 540 475 10 2.50 2.50 2.65 3.80 3.80 3.80 RAMP UP 3 C $/s (MAX) .067 -.083 [1,71 -2,10 ] .102 -.118 [2,60 -2,99 ] .157 [3,99] OPERATING CHARACTERISTICS AT 25 C $ AMBIENT COLOR MIN. TYP. LED CHARACTERISTICS RED 1120 1800 ORANGE 1400 2240 YELLOW 1120 1800 LUMINOUS INTENSITY InGaN GREEN 1120 1800 BLUE 280 450 WHITE 1120 1600 RED 634 ORANGE 610 YELLOW 597 PEAK WAVELENGTH InGaN GREEN 520 BLUE 464 RED 620 625 ORANGE 600 606 YELLOW 586 589 DOMINANT WAVELENGTH InGaN GREEN 516 525 BLUE 463 469 WHITE SEE NOTE RED 1.90 2.15 ORANGE 1.90 2.15 YELLOW 2.05 2.15 FORWARD VOLTAGE InGaN GREEN 2.90 3.40 BLUE 2.90 3.40 WHITE 2.90 3.30 ALL 120 VIEWING ANGLE 100s MAX 100 .138 #.002 [3,51 #0,05 ] TAPE SPECIFICATIONS RAMP DOWN 6 C $/s (MAX) 150 .437 [11,1] .079 #.002 [2,01 #0,05 ] .315 [8] .142 [3,61] TYP. .114 [2,9] TYP. REV .130 [3,3] TYP. NOTES: PAD 3 PAD 4 ANODE CATHODE .005 -.007 [0,13 -0,17 ] .020 -.043 [0,50 -1,07 ] 1. SOLDER ADHERANCE: EACH PAD PER MIL-STD-202E, METHOD 208C. 2. SUFFIX -202F FOR 20-PCS ON A SAMPLE STRIP. 3. SUFFIX -207F FOR 180mm DIA. REEL, 8mm WIDE TAPE, PACKAGED 2000 PCS PER REEL WITH A PITCH OF 4mm. 4. TAPE AND REEL AS PER EIA STANDARD 481-1, WITH CATHODE TOWARD SPROCKET. 5. LEDS NOT DESIGNED FOR REVERSE OPERATION. 6. DIALIGHT PART NUMBER: 597-3XX9-20XF. 7. TAPE AND REEL LEDS MAY REQUIRE RE-TAPING AFTER TWELVE MONTHS. 8. PIN NUMBERS FOR REFERENCE ONLY, DESIGNATION NON-EXISTENT ON PART. 9. DEVICES HAVE A MOISTURE SENSITIVITY LEVEL OF "2". CAUTION LABEL APPLIED AS PER JEDEC STD. 033. 10. CHROMATICITY COORDINATES FOR WHITE LED AT I F = 30 mA : X=0.30, Y=0.28. 11. THIS ASSEMBLY CONTAINS ELECTROSTATIC DISCHARGE SENSITIVE DEVICES (ESDS). MAINTAIN ALL PRECAUTIONARY MEASURES DURING ASSEMBLY, HANDLING AND STORAGE IN ACCORDANCE WITH IPC-A-610. 12. DO NOT USE PADS 2 & 3 FOR ELECTRICAL CONTACT. LED SCHEMATIC ATTENTION: OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC SENSITIVE DEVICES THIS DRAWING AND THE CONTENTS HEREIN ARE CONFIDENTIAL AND THE SOLE PROPERTY OF DIALIGHT. REPRODUCTION OF THIS DRAWING OR CONSTRUCTION OF ANY PARTS WITHIN THIS DRAWING ARE FORBIDDEN WITHOUT THE WRITTEN CONSENT OF DIALIGHT. SCALE: 8.000 C-17824 TOLERANCES: UNLESS OTHERWISE SPECIFIED LED COLOR UNITS RED ORANGE YELLOW InGaN GREEN BLUE WHITE 70 70 70 50 50 50 mA FRACTIONS: #1/64 DECIMALS (.XX): #.02 DECIMALS (.XXX): #.004 100 100 100 400 300 300 mA ANGLES: 1.16 1.16 1.16 0.80 0.80 0.80 mA/ $C FINISH: OPERATING TEMPERATURE -40 TO +110 $C STORAGE TEMPERATURE -40 TO +110 $C TITLE - #3 $ 1501 ROUTE 34 SOUTH FARMINGDALE, NJ 07727 - 83330 A POWER PLCC-4 SMT LEDS MATERIAL FSCM REV DRAWING NUMBER ALL DIM'S IN: INCHES (MM) SHEET 1 OF 1 FAMILY TABLE: