Application: The SafeSite® LED area light saves at least 50% energy compared to traditional HID light sources, while reducing maintenance and carbon emissions in Class I, Div 2 applications. This light incorporates both cutting edge LED technology along with proprietary optics to achieve area lighting comparable with other traditional light sources. Whether your application is in a refinery, oil platform, chemical plant or any other Class I, Div 2 application, the LED area light offers long life and requires minimal maintenance, improving safety and reliability. The SafeSite LED Area Light with Retrofit Adapter Kit Luminaire is designed for installations where the fixture to be replaced is installed in compliance with all required codes. Installing the SafeSite LED Retrofit Luminaire is compliant with electrical codes and standards and will not void UL listings when installed in accordance with provided installation instructions. ® SafeSite LED Area Light with Retrofit Adapter Kit Mechanical Information 10.6 [270] 9.7 [245] Fixture Weight: 13.5lbs (6.1 kg) Shipping Weight: 15.5lbs (7.0 kg) Mounting: See “Mounting Compatibility” section on page 2 Cabling: 10” (0.25m) SOOW Power Cord Electrical specifications 10.4 [264] Certifications Class I, Div 2, Groups A,B,C,D UL 1598/A CSA 22.2 No. 137-M1981 IP66 (pending) NEMA 4X (pending) Features & Benefits • • • • • • • • • 5 year full performance warranty Instant on/off operation Universal input (100-277 VAC), 50/60Hz Mercury free Resistant to shock and vibration Temperature compensation technology for longer life L70 rated for >100,000 hours @ 25°C Factory sealed Low T rating compared to traditional fixtures Ambient Temperature Range T4a Temperature Code Ambient Temperature Range T5 Temperature Code -40°F to +149°F (-40°C to +65°C) -40°F to +113°F (-40°C to +45°C) Optical Pattern1 180 360 180 360 180 360 Color2 Cool White Cool White Cool White Cool White Cool White Cool White Power Consumption: 43W / 55W / 70W Operating Temp: -40°F to +149°F (-40°C to +65°C) FCC Title 47, Subpart B, Section 15, class A device. RF Immunity; 10V/m, 80MHz-1GHz Surge Protection: 1 kV line to line 2 kV line to ground THD: <15% Power Factor: > 0.9 Construction Housing: Powder coated aluminum Finish: Polyester / epoxy powder coat gray RAL 7040 for superior corrosion resistance Lens: Polycarbonate - UL1598A wet location Photometric Information Temperature Ratings Ordering Codes: Part Number HZD2C2NC HZD3C2NC HZD4C2NC HZD5C2NC HZD8C2NC HZD9C2NC 100-277VAC, 50/60 Hz Noise Requirements/ EMC: Dimensions in Inches [mm] • • • • • Operating Voltage: CRI: > 70 CCT: 5,700K (cool white) 4,300K (neutral white) Optics: 180° f o r w a r d t h r o w 360° c i r c u l a r p a t t e r n IES Files: Available upon request All values typical unless otherwise state Lumens 3,500 3,500 4,500 4,500 5,800 5,800 1 Watts 43 43 55 55 70 70 Lumens Per Watt 81 81 82 82 83 83 Replaces Up To 70W HID 70W HID 175W HID 175W HID 250W HID 250W HID 180° optical pattern versions are optimized for a 45° mounting angle Part numbers listed in the above table are cool white. For neutral white version replace the 5th character with N Ex: HZD2C2N becomes HZD2N2N 2 www.dialight.com SafeSite® LED Area Light with Retrofit Adapter Kit Candela Plots 180° Optical Pattern Mounted at 45° 360° Optical Pattern Mounting Compatibility SafeSite® LED Area Light with Retrofit Adapter Kit is Compatible with the Following Pendant Ceiling Wall Stanchion Quad-Mount APM2 CM2 APM3 CM3 TWM2 JM5 QM25 TWM3 PM5 Dialight reserves the right to make changes at any time in order to supply the best product possible. The most current version of this document will always be available at: www.dialight.com/Assets/Brochures_And_Catalogs/Illumination/MDTFHZRALX001.pdf www.dialight.com MDTFHZRALX001_B