DIOTECH R4000

R2500 THRU R5000
HIGH VOLTAGE SILICON RECTIFIER
Reverse Voltage - 2500 to 5000 Volts
Forward Current - 0.2 Ampere
FEATURES
DO-15
Low cost
● Low leakage
● Low forward voltage drop
● High current capability
●
1.0 (25.4)
MIN.
0.140 (3.6)
0.104(2.6)
DIA.
0.300(7.6)
0.230(5.8)
MECHANICAL DATA
Case: JEDEC DO-15 molded plastic body
Terminals: Plated axial leads, solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight:0.014 ounce, 0.40 grams
1.0 (25.4)
MIN.
0.034 (0.90)
0.028 (0.70)
DIA.
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
@ TA = 25 C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Characteristic
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
RMS Reverse Voltage
Average Rectified Output Current
(Note 1)
@ TL = 50 C
Non-Repetitive Peak Forward Surge Current 8.3ms
single half sine-wave superimposed on rated load
(JEDEC Method)
Forward Voltage
@ IF = 200mA
Peak Reverse Leakage Current
at Rated DC Blocking Voltage
Typical Junction Capacitance (Note 2)
Typical Thermal Resistance Junction to Ambient
Operating and Storage Temperature Range
Notes:
Symbol
R2500
R3000
R4000
R5000
Unit
V RRM
V RWM
VR
2500
3000
4000
5000
V
V R(RMS)
1750
2100
2800
3500
V
IO
200
mA
IFSM
30
A
V FM
IRM
Cj
R
JA
T j, TSTG
3.0
4.0
5.0
5.0
V
A
30
pF
117
K/W
-65 to +150
1. Valid provided that leads are kept at ambient temperature at a distance of 9.5mm from the case.
2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC.
C
R2500 THRU R5000
RATINGS AND CHARACTERISTIC CURVES
PEAK FORWARD SURGE CURRENT, (A)
FIG. 2 - MAXIMUM NON-REPETITIVE FORWARD
250
Single Phase Half Wave
60Hz Inductive or
Resistive Load
200
150
100
50
0
0
50
100
150
AMBIENT TEMPERATURE, (
INSTANTANEOUS REVERSE CURRENT, (uA)
AVERAGE FORWARD CURRENT, (mA)
FIG. 1 - TYPICAL FORWARD CURRENT
DERATING CURVE
175
SURGE CURRENT
60
50
8.3ms Single Half Sine-Wave
(JEDEC Method)
40
30
20
10
0
1
)
10
100
NUMBER OF CYCLES AT 60Hz
FIG. 3 - TYPICAL REVERSE CHARACTERISTICS
10
6
4
2
1.0
.6
.4
.2
.1
.06
.04
.02
.01
TJ = 25
0
20
40
60
80
100
120
PERCENT OF RATED PEAK
REVERSE VOLTAGE, (%)
140