LED - Lamp ELD-690-524 16.11.2007 rev. 04 Radiation Type Technology Case Red DDH AlGaAs/AlGaAs 5 mm plastic lens Description High-power, high-speed far-red LED in standard 5 mm package, housing with standoff leads 12,35 1 2,75 1 Anode 1 0,5 Cathode 2 1,5 Note: Special packages without standoff available on request 0,5 2 Applications 1 Ø5 8,6 Ø5,75 +1,0 36,5 -1,0 Optical communications, safety equipment, automation Maximum Ratings Tamb = 25°C, unless otherwise specified Test сonditions Parameter Symbol Value Unit IF 50 mA IFM 150 mA PD 150 mW Operating temperature range Tamb -20 to +100 °C Storage temperature range Tstg -55 to +100 °C Junction temperature TJ 100 °C Typ Max Unit VF 1,75 2,1 V 1,85 Forward current (DC) (tP ≤ 50 µs, tP /T = 1/2) Peak forward current Power dissipation Optical and Electrical Characteristics Tamb = 25°C, unless otherwise specified Test Parameter conditions IF = 20 mA Forward voltage Symbol Min Forward voltage* IF = 50 mA VF Reverse voltage IR = 10 µA VR 5 Radiant power IF = 20 mA Φe 3,5 Radiant power* IF = 50 mA Φe Peak wavelength IF = 20 mA λp Spectral bandwidth at 50% IF = 20 mA ∆λ0.5 25 nm Viewing angle IF = 20 mA ϕ 20 deg. Switching time *for information only IF = 20 mA tr, tf 25 ns 680 V V 4,5 mW 12 mW 690 700 nm Note: All measurements carried out on EPIGAP equipment We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications.All operating parameters must be validated for each customer application by the customer. EPIGAP Optoelektronik GmbH, D-12555 Berlin, Köpenicker Str.325 b, Haus 201 1 of 1 Tel.: +49-30-6576 2543, Fax : +49-30-6576 2545