LED - Lamp ELD-960-545 15.11.2007 rev. 04 Radiation Type Technology Case Infrared DH AlGaAs/GaAs 5 mm plastic lens Description High-power, high-speed LED in the infrared range. Mounted in standard 5 mm housing with standoff leads 7,1 - 0,6 0,8 - 0,4 5,3 - 0,3 2,54 1,7 - 0,1 6,2 - 0,5 1,1 - 0,1 Anode Applications 2 10,6 - 0,6 16,5 - 2,0 Note: Special packages without standoff available on request Optical communications, safety equipment, automation, optical sensors, medical appliances 0,7 - 0,4 Maximum Ratings Tamb = 25°C, unless otherwise specified Test сonditions Parameter Forward current (DC) (tP ≤ 50 µs, tP /T = 1/2) Peak forward current Symbol Value Unit IF 100 mA IFM 200 mA PD 170 mW Operating temperature range Tamb -20 to +80 °C Storage temperature range Tstg -40 to +100 °C Junction temperature TJ 100 °C TSd 260 °C Typ Max Unit VF 1.2 1.4 V 1.4 1.7 V Power dissipation t ≤ 5 s, 3 mm from case Soldering temperature Optical and Electrical Characteristics Tamb = 25°C, unless otherwise specified Test Parameter conditions IF = 20 mA Forward voltage Symbol Min Forward voltage* IF = 100 mA VF Reverse voltage IR = 100 µA VF 5 Radiant power IF = 20 mA Φe 6.0 Radiant power* IF = 100 mA Φe Radiant intensity IF = 20 mA Ιe Radiant intensity* IF = 100 mA Peak wavelength V 8.5 mW 27 mW 15 mW/sr Ιe 45 mW/sr IF = 100 mA λp 960 nm Spectral bandwidth at 50% IF = 100 mA ∆λ0.5 60 nm Viewing angle IF = 100 mA ϕ 40 deg. Switching time IF = 100 mA tr, tf 400 ns 10 *measured after 30s current flow Note: All measurements carried out on EPIGAP equipment We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications.All operating parameters must be validated for each customer application by the customer. EPIGAP Optoelektronik GmbH, D-12555 Berlin, Köpenicker Str.325 b, Haus 201 Tel.: +49-30-6576 2543, Fax : +49-30-6576 2545 1 of 1