LED - Lamp ELD-870-515-5 15.11.2007 rev. 04 Radiation Type Technology Case Infrared DDH AlGaAs/AlGaAs 5 mm plastic lens Description High-power, high-speed LED in the NIR spectral range, fast switching time, housing with standoff leads 12,35 1 2,75 1 Anode 1 0,5 Cathode 2 1,5 Note: Special packages without standoff available on request 0,5 2 Applications 1 8,6 Ø5 Ø5,75 36,5 +1,0 -1,0 Optical communications, safety equipment, automation Maximum Ratings Tamb = 25°C, unless otherwise specified Parameter Test сonditions Symbol Value Unit IF 100 mA (tP ≤ 50 µs, tP /T = 1/2) IFM 200 mA IR=10 µA VR 5 V PD 280 mW Operating temperature range Tamb -20 to +100 °C Storage temperature range Tstg -55 to +100 °C Tsol 260 °C Typ Max Unit 1,5 2,0 V Forward current (DC) Peak forward current Reverse voltage Power dissipation < 5s, 3.0 mm from case Lead soldering temperature Optical and Electrical Characteristics Tamb = 25°C, unless otherwise specified Test Parameter conditions IF = 100 mA Forward voltage Symbol Min VF Radiant power IF = 100 mA Φe 10 30 mW Radiant intensity IF = 100 mA Ιe 100 140 mW/sr Peak wavelength IF = 20 mA λp 860 875 Spectral bandwidth at 50% IF = 20 mA ∆λ0.5 65 nm Viewing angle IF = 20 mA ϕ 10 deg. 10/20 ns IF = 20 mA tr, tf Switching time Note: All measurements carried out on EPIGAP equipment 890 nm We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications.All operating parameters must be validated for each customer application by the customer. EPIGAP Optoelektronik GmbH, D-12555 Berlin, Köpenicker Str.325 b, Haus 201 1 of 1 Tel.: +49-30-6576 2543, Fax : +49-30-6576 2545