LED - Lamp ELD-880-595 15.11.2007 rev. 05 Radiation Type Technology Case Infrared DDH AlGaAs/AlGaAs 5 mm flat plastic case Description High-power, high-speed infrared LED, wide beam angle, housing with standoff leads 32,5 ±0,1 ±1,0 ±0,2 Note: Special packages without standoff available on request ±0,2 Anode Applications 2,5 ±0,2 2,0 ±0,1 8,0 0,5 Ø4,8 ±0,1 0,7 max Ø5,4 1,25 ±0,2 1,0 1,5 ±0,5 Optical communications, safety equipment, automation Maximum Ratings Tamb = 25°C, unless otherwise specified Test сonditions Parameter Symbol Value Unit IF 100 mA IFM 1000 mA PD 180 mW Operating temperature range Tamb -20 to +80 °C Storage temperature range Tstg -40 to +100 °C Junction temperature TJ 100 °C Typ Max Unit 1.4 V Forward current (DC) (tP ≤ 50 µs, tP /T = 1/2) Peak forward current Power dissipation Optical and Electrical Characteristics Tamb = 25°C, unless otherwise specified Test conditions Symbol Forward voltage IF = 20 mA VF 1.2 Forward voltage IF = 100 mA VF 1.4 Reverse voltage IR = 10 µA VR 5 Radiant power IF = 20 mA Φe 5 Radiant power IF = 100 mA Φe Radiant intensity IF = 20 mA Ιe Radiant intensity IF = 100 mA Ιe Peak wavelength IF =100 mA λp Spectral bandwidth at 50% IF =100 mA ∆λ0.5 65 nm Viewing angle IF =100 mA ϕ 110 deg. Switching time IF =100 mA tr, tf 10 ns Parameter Min 0.5 870 V V 7 mW 30 mW 0.8 mW/sr 3.8 mW/sr 880 890 nm Note: All measurements carried out on EPIGAP equipment We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications.All operating parameters must be validated for each customer application by the customer. EPIGAP Optoelektronik GmbH, D-12555 Berlin, Köpenicker Str.325 b, Haus 201 1 of 3 Tel.: +49-30-6576 2543, Fax : +49-30-6576 2545 LED - Lamp ELD-880-595 15.11.2007 rev. 05 We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications.All operating parameters must be validated for each customer application by the customer. EPIGAP Optoelektronik GmbH, D-12555 Berlin, Köpenicker Str.325 b, Haus 201 2 of 3 Tel.: +49-30-6576 2543, Fax : +49-30-6576 2545 LED - Lamp ELD-880-595 15.11.2007 rev. 05 Remarks concerning optical radiation safety* Up to maximum forward current, at continuous operation, this LED may be classified as LED product Class 1 , according to standard IEC 60825-1:A2. Class 1 products are safe to eyes and skin under reasonably predictable conditions. This implicates a direct observation of the light beam by means of optical instruments. *Note: Safety classification of an optical component mainly depends on the intended application and the way the component is being used. Furthermore, all statements made to classification are based on calculations and are only valid for this LED "as it is", and at continuous operation. Using pulsed current or altering the light beam with additional optics may lead to different safety classifications. Therefore these remarks should be taken as recommendation and guideline only. LED Class 1 accord. DIN EN/IEC 60825-1:2001-11 We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications.All operating parameters must be validated for each customer application by the customer. EPIGAP Optoelektronik GmbH, D-12555 Berlin, Köpenicker Str.325 b, Haus 201 3 of 3 Tel.: +49-30-6576 2543, Fax : +49-30-6576 2545