TACT SWITCHES SERIES KAS SWITCHES SLIDE DIP SWITCHES TOGGLE SWITCHES PUSHBUTTON SWITCHES NAVIGATION SWITCHES SPECIFICATIONS Available in 2 to 12 positions Tape seal option Vertical & right angle options APPLICATIONS/MARKETS Garage door openers Test & instrumentation Telecommunications Controller application Switch: 25mA @ 24V DC Carry: 100mA @ 50V DC Insulation Resistance: 100 MΩ Min. @ 500V DC Contact Resistance: Initial:50 mΩ typical @ 2-4V DC @ 100mA After Life: 100mΩ typical @ 2-4 DC @ 100mA Operating Life: 2,000 make-and-break cycles, each circuit Operating Force: 1000 gf max. Travel (Actuator): 2.0 mm typical Dielectric Strength: 500V RMS min. @ sea level between adjacent terminals Temperature Range: Operating/Storage: -40° C to 85° C Vibration: To MIL-STD-202F, Method 201 A Shock: To MIL-STD-202F, Method 213B, Condition A Wave: 500 F (260 C) for 5s max; Hand: 30W soldering iron @ 608 F (320 C) for 2s typical. Keep all switches in the “OFF” position during soldering and cleaning process. SNAP-ACTION SWITCHES MATERIALS Housing and Actuator: Glass filled polyester (PBT) UL94-V0 Contacts: Phosphor Bronze with gold plate over nickel plate Terminals: Phosphor Bronze with gold plate over nickel plate Tape: Mylar DIP SWITCHES PACKAGING Switches are supplied in standard IC tubes with all poles in the “OFF” position. ▲ ▲ ▲ KEYLOCK SWITCHES SPST, 2 thru 12 positions (except position 11) Contact Rating: Soldering Recommendations: SLIDE SWITCHES ROCKER SWITCHES FEATURES & BENEFITS Switch Function: HOW TO ORDER SERIES MODEL NO. TERMINATION CIRCUIT S = Slide Type 1 = PC Pin 1 = SPST NO. OF POSITIONS ACTUATOR SEAL R = Recessed Act., Top Side OFF* (None) = Std. Unsealed E = Extended Act., Top Side OFF T = Top Tape Sealed KA ROTARY SWITCHES KA DETECTOR SWITCHES 2 = Right Angle PC Pin CAP OPTIONS ▲ ▲ ▲ 216 02 03 04 05 06 07 08 09 10 12 Example Ordering Number KA_ S_ 1_ 1_ 04_ R_ T * Not available with right angle termination. Specifications subject to change without notice. Phone: 800-867-2717 Fax: 763-531-8235 TACT SWITCHES TERMINATION OPTIONS KAS TOGGLE SWITCHES P.C. MOUNTING PUSHBUTTON SWITCHES NAVIGATION SWITCHES 1 PC PIN SCHEMATIC ROCKER SWITCHES Position 1 denotes Pin No. 1. KAS Positions: 2 3 4 5 6 7 8 9 10 12 “A” 6.44 8.98 11.52 14.06 16.6 19.14 21.68 24.22 26.76 31.84 Dimension: (.254) (.354) (.454) (.554) (.654) (.754) (.854) (.954) (1.054) (1.254) “B” 2.54 5.08 7.62 10.16 12.7 15.24 17.78 20.32 22.86 27.94 Dimension: (.100) (.200) (.300) (.400) (.500) (.600) (.700) (.800) (.900) (1.100) ACTUATOR OPTIONS E EXTENDED R TOP TAPE SEALED ET TOP TAPE SEALED DIP SWITCHES CAP OPTIONS R RECESSED SEAL OPTIONS KEYLOCK SWITCHES SCHEMATIC ROTARY SWITCHES Position 1 denotes Pin No. 1. DETECTOR SWITCHES P.C. MOUNTING SNAP-ACTION SWITCHES SLIDE SWITCHES 2 RIGHT ANGLE PC PIN www.e-switch.com info @ e-switch.com 217