SHEET 1 OF 1 2.54 [.100 in] 8.13 [.320 in] 5.08 [.200 in] n1.09 [.043 in] P.C. MOUNTING n6.00 [.236 in] 4.39 [.173 in] FLAT SWITCH FUNCTION POS. 1 POS. 2 POS. 3 ISOMETRIC ON NONE ON 2-3 OPEN POS. 1 POS. 3 25~ 2-1 5.59 [.220 in] 2 1 2.54 n[.100 in] 9.40 [.370 in] 10-48 UNS-2A THREADS 3 CIRCUIT: SPDT NOTE: 1. ALL DIMENSIONS IN MM [INCH] 2. GENERAL TOLERANCE: X.X=±0.4 X.XX=±0.25 3. TERMINAL NUMBERS FOR REF ONLY 4. PLATING MATERIAL: SILVER 5. RATING: 3 AMPS @ 120VAC OR 28VDC UL, CUL 1 AMPS @ 250VAC UL, CUL 6. ELECTRIC LIFE: 30,000 MAKE-AND-BREAK CYCLES AT FULL LOAD. 7. INSULATION RESISTANCE: 1,000 MEGA-OHM MIN. 8. DIELECTRIC STRENGTH: 1,000 V RMS @SEA LEVEL. 9. OPERATING TEMP.: -30°C to 85°C 10. HARDWARE TO BE SHIPPED BULK T200001 - HEXNUT - QTY 2 T200000 - LOCKWASHER - QTY 1 T200002 - LOCKRING - QTY 1 11. DENOTES CRITICAL PARAMETER. 12. 2002/95/EC (ROHS) COMPLIANT FIXED NOTES, HARDWARE 17067 C 200MSP1T1B1M2QE (T211018) 8.64 [.340 in] E-LOGO ON OPPOSITE SIDE 1 2 3 3 .51 [.020 in] 3.30 [.130 in] 2.54 [.100 in] 3/6/07 TN B 15590 CHANGE HEX NUT FROM T200015 12/6/05 PH A 14738 RELEASED FOR PRODUCTION 3/7/05 AR REV PCR NO DATE BY DESCRIPTION .51 [.020 in] THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROPRIETARY TO E-SWITCH AND IS NOT TO BE COPIED OR TRANSFERRED TITLE SCALE NO EPOXY ON TERMINALS BELOW THIS SURFACE .76 [.030 in] 200MSP1T1B1M2QEH 2:1 DATE DR 3/6/2007 TN REV DWG ST211018 C