EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Right Angle Lens Chip LEDs with Bi-Color (Multi-Color) 12-22/G6R8C-A30/2C Features ․Package in 8mm tape on 7〞diameter reel. ․Compatible with automatic placement equipment. ․Compatible with infrared and vapor phase reflow solder process. ․Multi-color type. ․Pb-free. ․The product itself will remain within RoHS compliant version. Descriptions ․The 12-22 SMD LED is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. ․Besides, lightweight makes them ideal for miniature applications. etc. Applications ․Backlighting in dashboard and switch. ․Telecommunication: indicator and backlighting in telephone and fax. ․Flat backlight for LCD, switch and symbol. ․General use. Device Selection Guide Chip Material G6 AlGaInP Brilliant Yellow Green R8 AlGaInP Deep Red Everlight Electronics Co., Ltd. Device No: SZDSE-122-A24 Revision Emitted Color Type :1 LifecyclePhase: Resin Color Water Clear http://www.everlight.com Rev: 1 Prepared date:10-Nov-2007 Page: 1 of 12 Prepared by: LeiHui Release Date:2008-09-20 00:16:09.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. 12-22/G6R8C-A30/2C Package Outline Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Everlight Electronics Co., Ltd. Revision : 1 No: SZDSE-122-A24 Device LifecyclePhase: http://www.everlight.com Rev: 1 Release Prepared date:10-Nov-2007 Page: 2 of 12 Date:2008-09-20 Prepared by: LeiHui00:16:09.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. 12-22/G6R8C-A30/2C Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF Peak Forward Current (Duty 1/10 @1KHz) G6:25 mA R8:25 G6:60 IFP mA R8:60 G6:60 Power Dissipation Pd mW Electrostatic Discharge(HBM) ESD Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40~ +90 ℃ Soldering Temperature Tsol R8:60 G6:2000 V R8:2000 Reflow Soldering : 260 ℃ for 10 sec. Everlight Electronics Co., Ltd. Revision : 1 No: SZDSE-122-A24 Device LifecyclePhase: Hand Soldering : 350 ℃ for 3 sec. http://www.everlight.com Rev: 1 Release Prepared date:10-Nov-2007 Page: 3 of 12 Date:2008-09-20 Prepared by: LeiHui00:16:09.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. 12-22/G6R8C-A30/2C Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Min. Typ. Max. Iv G6 28.5 ----- 72.0 R8 28.5 ----- 72.0 ----- 120 ----- deg ----- nm Luminous Intensity Viewing Angle 2θ1/2 Λp G6 Peak Wavelength ----- R8 λd G6 Dominant Wavelength Forward Voltage Reverse Current 650 573 △λ G6 R8 VF IR ----- 639 ----- IF=20mA ----- 20 ----- ----- nm 20 G6 1.7 2.0 2.4 R8 1.7 2.0 2.4 ----- ----- G6 Condition mcd nm R8 Spectrum Radiation Bandwidth ----- 575 Unit R8 10 V μA VR=5V 10 Notes: 1.Tolerance of Luminous Intensity ±11% Everlight Electronics Co., Ltd. Revision : 1 No: SZDSE-122-A24 Device LifecyclePhase: http://www.everlight.com Rev: 1 Release Prepared date:10-Nov-2007 Page: 4 of 12 Date:2008-09-20 Prepared by: LeiHui00:16:09.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. 12-22/G6R8C-A30/2C Bin Range Of Luminous Intensity G6 Bin Min Max N 28.5 45.0 P 45.0 72.0 Bin Min Max N 28.5 45.0 P 45.0 72.0 Unit Condition mcd IF=20mA Unit Condition mcd IF=20mA R8 Notes: 1.Tolerance of Luminous Intensity ±11% Everlight Electronics Co., Ltd. Revision : 1 No: SZDSE-122-A24 Device LifecyclePhase: http://www.everlight.com Rev: 1 Release Prepared date:10-Nov-2007 Page: 5 of 12 Date:2008-09-20 Prepared by: LeiHui00:16:09.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. 12-22/G6R8C-A30/2C Typical Electro-Optical Characteristics Curves G6 Everlight Electronics Co., Ltd. Revision : 1 No: SZDSE-122-A24 Device LifecyclePhase: http://www.everlight.com Rev: 1 Release Prepared date:10-Nov-2007 Page: 6 of 12 Date:2008-09-20 Prepared by: LeiHui00:16:09.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. 12-22/G6R8C-A30/2C Typical Electro-Optical Characteristics Curves R8 Everlight Electronics Co., Ltd. Revision : 1 No: SZDSE-122-A24 Device LifecyclePhase: http://www.everlight.com Rev: 1 Release Prepared date:10-Nov-2007 Page: 7 of 12 Date:2008-09-20 Prepared by: LeiHui00:16:09.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. 12-22/G6R8C-A30/2C Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Everlight Electronics Co., Ltd. Revision : 1 No: SZDSE-122-A24 Device LifecyclePhase: http://www.everlight.com Rev: 1 Release Prepared date:10-Nov-2007 Page: 8 of 12 Date:2008-09-20 Prepared by: LeiHui00:16:09.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. 12-22/G6R8C-A30/2C Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Everlight Electronics Co., Ltd. Revision : 1 No: SZDSE-122-A24 Device LifecyclePhase: Desiccant http://www.everlight.com Rev: 1 Release Prepared date:10-Nov-2007 Label Page: 9 of 12 Date:2008-09-20 Prepared by: LeiHui00:16:09.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. 12-22/G6R8C-A30/2C Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level:90% LTPD:10% Ac/Re Items Test Condition 1 Reflow Soldering Temp. : 260℃±5℃ Min. 5sec. 6 Min. 22 PCS. 0/1 Temperature Cycle H : +100℃ 15min ∫ 5 min L : -40℃ 15min 300 Cycles 22 PCS. 0/1 Thermal Shock H : +100℃ 5min ∫ 10 sec L : -10℃ 5min 300 Cycles 22 PCS. 0/1 Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1 Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 2 3 4 5 High Temperature Storage Low Temperature Storage 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85℃/ 85%RH 1000 Hrs. 22 PCS. 0/1 Everlight Electronics Co., Ltd. Revision Test Sample Hours/Cycles Size No. : 1 No: SZDSE-122-A24 Device LifecyclePhase: http://www.everlight.com Rev: 1 Release Prepared date:10-Nov-2007 Page: 10 of 12 Date:2008-09-20 Prepared by: LeiHui00:16:09.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. 12-22/G6R8C-A30/2C Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30 ℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Everlight Electronics Co., Ltd. Revision : 1 No: SZDSE-122-A24 Device LifecyclePhase: http://www.everlight.com Rev: 1 Release Prepared date:10-Nov-2007 Page: 11 of 12 Date:2008-09-20 Prepared by: LeiHui00:16:09.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. 12-22/G6R8C-A30/2C 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Everlight Electronics Co., Ltd. Revision : 1 No: SZDSE-122-A24 Device LifecyclePhase: Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com http://www.everlight.com Rev: 1 Release Prepared date:10-Nov-2007 Page: 12 of 12 Date:2008-09-20 Prepared by: LeiHui00:16:09.0 Expired Period: Forever