EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet TOP View LEDs 67-21/RSC-T1V1/2T Features ․P-LCC-2 package. ․White package. ․Optical indicator. ․Colorless clear window. ․Wide viewing angle. ․Suitable for vapor-phase reflow, Infrared reflow and wave solder processes. ․Computable with automatic placement equipment. ․Available on tape and reel (8mm Tape). ․Pb-free. ․The product itself will remain within RoHS compliant version. Descriptions ․The 67-21 series is available in soft orange, green,blue and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. This feature makes the ideal for light pipe application. The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium. Applications ․Automotive: backlighting in dashboard and switch. ․Telecommunication: indicator and backlighting in telephone and fax. ․Flat backlight for LCD, switch and symbol. ․Light pipe application. ․General use. Device Selection Guide Chip Material Emitted Color Resin Color Brilliant Red Water Clear AlGaInP Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-671-516 prepared date:18-Apr-2006 :1 LifecyclePhase: Rev. 1 Page: 1 of 10 Prepared by: Teresa Tee Release Date:2008-09-20 00:15:57.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. 67-21/RSC-T1V1/2T Package Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-671-516 prepared date:18-Apr-2006 :1 LifecyclePhase: Rev. 1 Page: 2 of 10 Prepared by: Teresa Tee Release Date:2008-09-20 00:15:57.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. 67-21/RSC-T1V1/2T Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Units Reverse Voltage VR 5 V Forward Current IF 50 mA Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +100 ℃ Electrostatic Discharge(HBM) ESD 150 V Power Dissipation Pd 130 mW Peak Forward Current (Duty 1/10 @1KHz) IFP 100 mA Soldering Temperature Tsol Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Min. Typ. Max. Unit Condition Luminous intensity IV 285 ----- 900 mcd IF=20mA Viewing Angle 2θ1/2 ----- 120 ----- deg IF=20mA Peak Wavelength λp ----- 632 ----- nm IF=20mA Dominant Wavelength λd ----- 624 ----- nm IF=20mA Spectrum Radiation Bandwidth △λ ----- 20 ----- nm IF=20mA Forward Voltage VF 1.70 2.0 2.40 V IF=20mA Reverse Current IR ----- ----- 10 μA VR=5V Notes: 1.Tolerance of Luminous Intensity ±11% Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-671-516 prepared date:18-Apr-2006 :1 LifecyclePhase: Rev. 1 Page: 3 of 10 Prepared by: Teresa Tee Release Date:2008-09-20 00:15:57.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. 67-21/RSC-T1V1/2T Bin Rang Of Luminous Intensity Bin Min Max T1 285 360 T2 360 450 U1 450 565 U2 565 715 V1 715 900 Unit Condition mcd IF=20mA Notes: 1.Tolerance of Luminous Intensity ±11% Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-671-516 prepared date:18-Apr-2006 :1 LifecyclePhase: Rev. 1 Page: 4 of 10 Prepared by: Teresa Tee Release Date:2008-09-20 00:15:57.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. 67-21/RSC-T1V1/2T Typical Electro-Optical Characteristics Curves Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-671-516 prepared date:18-Apr-2006 :1 LifecyclePhase: Rev. 1 Page: 5 of 10 Prepared by: Teresa Tee Release Date:2008-09-20 00:15:57.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. 67-21/RSC-T1V1/2T Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-671-516 prepared date:18-Apr-2006 :1 LifecyclePhase: Rev. 1 Page: 6 of 10 Prepared by: Teresa Tee Release Date:2008-09-20 00:15:57.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. 67-21/RSC-T1V1/2T Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel. Note: The tolerances unless mentioned is ±0.1mm Unit = mm Moisture Resistant Packaging Label Revision Aluminum moisture-proof bag Desiccant Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-671-516 prepared date:18-Apr-2006 :1 LifecyclePhase: Label Rev. 1 Page: 7 of 10 Prepared by: Teresa Tee Release Date:2008-09-20 00:15:57.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. 67-21/RSC-T1V1/2T Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% Items Test Condition 1 Reflow Soldering Temp. : 260℃±5℃ Min. 5sec. Temperature Cycle H : +100℃ 15min ∫ 5 min L : -40℃ 15min 3 Thermal Shock H : +100℃ 5min ∫ 10 sec L : -10℃ 5min 4 High Temperature Storage Temp. : 100℃ 5 Low Temperature Storage 6 7 2 Revision Test Sample Ac/Re Hours/Cycles Size No. 22 PCS. 0/1 22 PCS. 0/1 22 PCS. 0/1 1000 Hrs. 22 PCS. 0/1 Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 DC Operating Life IF = 20 mA/ 25℃ 1000 Hrs. 22 PCS. 0/1 High Temperature / High Humidity 85℃/ 85%RH 1000 Hrs. 22 PCS. 0/1 Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-671-516 prepared date:18-Apr-2006 :1 LifecyclePhase: 6 min 300 Cycles 300 Cycles Rev. 1 Page: 8 of 10 Prepared by: Teresa Tee Release Date:2008-09-20 00:15:57.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. 67-21/RSC-T1V1/2T Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 1~5 °C / Sec. 260°C. Max. 10 Sec. Max. 1~5 °C / Sec. Pre-heating 180~200°C 60 Sec. Max. Above 220°C 120 Sec. Max. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-671-516 prepared date:18-Apr-2006 :1 LifecyclePhase: Rev. 1 Page: 9 of 10 Prepared by: Teresa Tee Release Date:2008-09-20 00:15:57.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. 67-21/RSC-T1V1/2T 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Revision Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-671-516 prepared date:18-Apr-2006 :1 LifecyclePhase: Rev. 1 Page: 10 of 10 Prepared by: Teresa Tee Release Date:2008-09-20 00:15:57.0 Expired Period: Forever