EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Full Color Chip LED (Chip LED with Right Angle Lens) 12-23C/R6GHBHC-A01/2C Features ․Package in 8mm tape on 7〞diameter reel. ․Compatible with automatic placement equipment. ․Compatible with infrared and vapor phase reflow solder process. ․Multi-color type. ․Pb-free. ․The product itself will remain within RoHS compliant version. Descriptions ․The 12-23C SMD LED is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. ․Besides, lightweight makes them ideal for miniature applications. etc. Applications ․Backlighting in dashboard and switch. ․Telecommunication: indicator and backlighting in telephone and fax. ․Flat backlight for LCD, switch and symbol. ․General use. Device Selection Guide Chip Emitted Color Revision Type Material R6 AlGaInP Brilliant Red GH InGaN Brilliant Green BH InGaN Blue Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-123-009 Prepared date:09-Jul-2008 :2 LifecyclePhase: Resin Color Water Clear Rev. 2 Page: 1 of 12 Prepared by :Yuan Shaoxiang Release Date:2008-09-20 00:15:54.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. 12-23C/R6GHBHC-A01/2C Package Outline Dimensions 3.0 2.0 Blue Green 2 1.0 3 4 Red Anode mark 1 0.40 1.50 0.50 R1.0 0.40 4 3 4 3 2 1 1 2 Note: The tolerances unless mentioned is ±0.1mm,Unit = mm Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-123-009 Prepared date:09-Jul-2008 :2 LifecyclePhase: Rev. 2 Page: 2 of 12 Prepared by :Yuan Shaoxiang Release Date:2008-09-20 00:15:54.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. 12-23C/R6GHBHC-A01/2C Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V R6:25 Forward Current IF GH:25 mA BH:25 R6:60 Peak Forward Current IFP (Duty 1/10 @1KHz) GH:100 mA BH:100 R6:60 Power Dissipation Pd GH:95 mW BH:95 R6:2000 Electrostatic Discharge (HBM) ESD GH:150 V BH:150 Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +90 ℃ Soldering Temperature Tsol Reflow Soldering : 260 ℃ for 10 sec. Revision Hand Soldering : 350 ℃ for 3 sec. Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-123-009 Prepared date:09-Jul-2008 :2 LifecyclePhase: Rev. 2 Page: 3 of 12 Prepared by :Yuan Shaoxiang Release Date:2008-09-20 00:15:54.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. 12-23C/R6GHBHC-A01/2C Electro-Optical Characteristics (Ta=25℃) Parameter Luminous Intensity Viewing Angle Symbol Iv Min. Typ. Max. R6 63 90 ---- GH 125 180 ---- BH 32 50 ---- ----- 100 ----- deg ----- nm ----- nm ----- nm 2θ1/2 R6 Peak Wavelength Dominant Wavelength Spectrum Radiation Bandwidth λp λd GH ----- R6 624 ----- VF 525 BH 470 R6 20 ----- BH Forward Voltage 518 468 △Λ GH 35 IR R6 1.7 2.0 2.4 GH 2.7 3.3 3.7 BH 2.7 3.3 3.7 GH mcd IF=20mA 25 R6 Reverse Current Condition 632 BH GH Unit V 10 ----- ----- 50 BH μA VR=5V 50 Notes: 1.Tolerance of Luminous Intensity ±11% Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-123-009 Prepared date:09-Jul-2008 :2 LifecyclePhase: Rev. 2 Page: 4 of 12 Prepared by :Yuan Shaoxiang Release Date:2008-09-20 00:15:54.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. 12-23C/R6GHBHC-A01/2C Typical Electro-Optical Characteristics Curves R6 Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-123-009 Prepared date:09-Jul-2008 :2 LifecyclePhase: Rev. 2 Page: 5 of 12 Prepared by :Yuan Shaoxiang Release Date:2008-09-20 00:15:54.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. 12-23C/R6GHBHC-A01/2C Typical Electro-Optical Characteristics Curves GH Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-123-009 Prepared date:09-Jul-2008 :2 LifecyclePhase: Rev. 2 Page: 6 of 12 Prepared by :Yuan Shaoxiang Release Date:2008-09-20 00:15:54.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. 12-23C/R6GHBHC-A01/2C Typical Electro-Optical Characteristics Curves BH Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-123-009 Prepared date:09-Jul-2008 :2 LifecyclePhase: Rev. 2 Page: 7 of 12 Prepared by :Yuan Shaoxiang Release Date:2008-09-20 00:15:54.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. 12-23C/R6GHBHC-A01/2C Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank xxxxxx xxxxxx REF: Forward Voltage Rank RoHS xxxxxxxxxxxx xxxx xxxxxxxx Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-123-009 Prepared date:09-Jul-2008 :2 LifecyclePhase: Rev. 2 Page: 8 of 12 Prepared by :Yuan Shaoxiang Release Date:2008-09-20 00:15:54.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. 12-23C/R6GHBHC-A01/2C Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Moisture Resistant Packaging Label Revision Aluminum moisture-proof bag Desiccant Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-123-009 Prepared date:09-Jul-2008 :2 LifecyclePhase: Label Rev. 2 Page: 9 of 12 Prepared by :Yuan Shaoxiang Release Date:2008-09-20 00:15:54.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. 12-23C/R6GHBHC-A01/2C Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% Ac/Re Items Test Condition 1 Reflow Soldering Temp. : 260℃±5℃ Min. 5sec. 6 Min. 22 PCS. 0/1 Temperature Cycle H : +100℃ 15min ∫ 5 min L : -40℃ 15min 300 Cycles 22 PCS. 0/1 Thermal Shock H : +100℃ 5min ∫ 10 sec L : -10℃ 5min 300 Cycles 22 PCS. 0/1 Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1 Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 2 3 High Temperature Storage Low Temperature Storage 4 5 Revision Test Sample Hours/Cycles Size No. 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85℃/ 85%RH 1000 Hrs. 22 PCS. 0/1 Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-123-009 Prepared date:09-Jul-2008 :2 LifecyclePhase: Rev. 2 Page: 10 of 12 Prepared by :Yuan Shaoxiang Release Date:2008-09-20 00:15:54.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. 12-23C/R6GHBHC-A01/2C Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-123-009 Prepared date:09-Jul-2008 :2 LifecyclePhase: Rev. 2 Page: 11 of 12 Prepared by :Yuan Shaoxiang Release Date:2008-09-20 00:15:54.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. 12-23C/R6GHBHC-A01/2C 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Revision Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-123-009 Prepared date:09-Jul-2008 :2 LifecyclePhase: Rev. 2 Page: 12 of 12 Prepared by :Yuan Shaoxiang Release Date:2008-09-20 00:15:54.0 Expired Period: Forever