Technical Data Sheet Right Angle Lens Chip LEDs with Bi-Color (Multi-Color) 17-223/BHR7C-C30/3C Features ․Package in 8mm tape on 7〞diameter reel. ․Compatible with automatic placement equipment. ․Compatible with infrared and vapor phase reflow solder process. ․Multi-color type. ․Pb-free. ․The product itself will remain within RoHS compliant version. Descriptions ․The 17-223 SMD LED is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. ․Besides, lightweight makes them ideal for miniature applications. etc. Applications ․Backlighting in dashboard and switch. ․Telecommunication: indicator and backlighting in telephone and fax. ․Flat backlight for LCD, switch and symbol. ․General use. Device Selection Guide Chip Emitted Color Type Material BH InGaN Blue R7 AlGaInP Dark-Red Resin Color Water Clear Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 1 of 13 Device No. Prepared date: 30-Jun-2011 Prepared by: Haizheng Gao 17-223/BHR7C-C30/3C Package Outline Dimensions Note: The tolerances unless mentioned is ±0.1mm,Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 2 of 13 Device No. Prepared date: 30-Jun-2011 Prepared by: Haizheng Gao 17-223/BHR7C-C30/3C Absolute Maximum Ratings (Ta=25℃ ℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF Peak Forward Current (Duty 1/10 @1KHz) IFP BH:25 mA R7:25 BH:100 mA R7:60 BH:95 Power Dissipation Pd mW Electrostatic Discharge (HBM) ESD BH:150 R7:2000 V Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +90 ℃ Soldering Temperature Tsol R7:60 Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 3 of 13 Device No. Prepared date: 30-Jun-2011 Prepared by: Haizheng Gao 17-223/ BHR7C-C30/3C Electro-Optical Characteristics (Ta=25℃ ℃) Parameter Symbol BH Luminous Intensity Typ. Max. 22.5 ----- 57.0 Iv 2θ1/2 14.5 ----- 36.0 ----- 130 ----- deg λp ----- nm ----639 R7 BH Dominant Wavelength 465.0 475.0 nm 621.5 △ λ ----- ----R7 BH ----- nm 20 2.7 ----- 3.2 VF V R7 1.55 ----- IR 2.15 50 BH Reverse Current IF=5mA 633.5 25 BH Forward Voltage ----- λd R7 Spectrum Radiation Bandwidth Condition 468 BH Peak Wavelength Unit mcd R7 Viewing Angle Min. ----- μA ----- VR=5V 10 R7 Notes: 1.Tolerance of Luminous Intensity ±11% 2.Tolerance of Dominant Wavelength ±1nm 3 .Tolerance of Forward Voltage ±0.05V Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 4 of 13 Device No. Prepared date: 30-Jun-2011 Prepared by: Haizheng Gao 17-223/ BHR7C-C30/3C Bin Range Of Luminous Intensity BH Bin Min Max 1 22.5 36.0 2 36.0 57.0 Bin Min Max 1 14.5 22.5 2 22.5 36.0 Unit Condition mcd IF =5mA Unit Condition mcd IF =5mA Unit Condition V IF =5mA Unit Condition V IF =5mA R7 Bin Range Of Forward Voltage BH Bin Min Max 1 2.70 2.80 2 2.80 2.90 3 2.90 3.00 4 3.00 3.10 5 3.10 3.20 Bin Min Max 1 1.55 1.75 2 1.75 1.95 3 1.95 2.15 R7 Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 5 of 13 Device No. Prepared date: 30-Jun-2011 Prepared by: Haizheng Gao 17-223/BHR7C-C30/3C Bin Range Of Dom. Wavelength BH Groups Bin Min Max X 465.0 470.0 Y 470.0 475.0 Bin Min Max E5 621.5 625.5 E6 625.5 629.5 E7 629.5 633.5 Z Unit Condition nm IF =5mA Unit Condition nm IF =5mA R7 Groups B Notes: 1.Tolerance of Luminous Intensity ±11% 2.Tolerance of Dominant Wavelength ±1nm 3 .Tolerance of Forward Voltage ±0.05V Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 6 of 13 Device No. Prepared date: 30-Jun-2011 Prepared by: Haizheng Gao 17-223/BHR7C-C30/3C Typical Electro-Optical Characteristics Curves BH Ta=25°C Forward Current I (mA) Relative luminous intensity ( % ) Ta=25°C Wavelength λ(nm) Forward Voltage VF (V) Relative luminous intensity ( %) Relative luminous intensity ( % ) Ta=25°C 1000 100 10 1 -60 -40 -20 0 20 40 60 80 100 Ambient Temperature Ta(°C ) Forward Current I (mA) Forward Current I (mA) Ta=25°C Ambient Temperature Ta (°C ) Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 7 of 13 Device No. Prepared date: 30-Jun-2011 Prepared by: Haizheng Gao 17-223/BHR7C-C30/3C Typical Electro-Optical Characteristics Curves R7 Ta=25°C Forward Current I (mA) Relative luminous intensity ( % ) Ta=25°C Wavelength λ(nm) Forward Voltage VF (V) Relative luminous intensity ( %) Relative luminous intensity ( % ) Ta=25°C Ambient Temperature Ta(°C ) Forward Current I (mA) Forward Current I (mA) Ta=25°C Ambient Temperature Ta (°C ) Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 8 of 13 Device No. Prepared date: 30-Jun-2011 Prepared by: Haizheng Gao 17-223/BHR7C-C30/3C Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: The tolerance unless mentioned is ±0.1mm,unit is mm. Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 9 of 13 Device No. Prepared date: 30-Jun-2011 Prepared by: Haizheng Gao 17-223/BHR7C-C30/3C Carrier Tape Dimensions: Loaded quantity 3000 PCS per reel Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant Label Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 10 of 13 Device No. Prepared date: 30-Jun-2011 Prepared by: Haizheng Gao 17-223/BHR7C-C30/3C Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% Test Sample Hours/Cycles Size No. Items Test Condition 1 Reflow Soldering Temp. : 260℃±5℃ Min. 5sec. 6 Min. 22 PCS. 0/1 Temperature Cycle H : +100℃ 15min ∫ 5 min L : -40℃ 15min 300 Cycles 22 PCS. 0/1 Thermal Shock H : +100℃ 5min ∫ 10 sec L : -10℃ 5min 300 Cycles 22 PCS. 0/1 Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1 Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 2 3 High Temperature Storage Low Temperature Storage 4 5 Ac/Re 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85℃/ 85%RH 1000 Hrs. 22 PCS. 0/1 Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 11 of 13 Device No. Prepared date: 30-Jun-2011 Prepared by: Haizheng Gao 17-223/BHR7C-C30/3C Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 12 of 13 Device No. Prepared date: 30-Jun-2011 Prepared by: Haizheng Gao 17-223/BHR7C-C30/3C 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 13 of 13 Device No. Prepared date: 30-Jun-2011 Prepared by: Haizheng Gao