EVERLIGHT ELW4503S(TB)-V

ELW135 ELW136
ELW4503
8 PIN DIP WIDE BODY HIGH SPEED
1Mbit/s TRANSISTOR PHOTOCOUPLER
Features
• High speed 1Mbit/s
• High isolation voltage between input
and output (Viso=5000 Vrms )
• Guaranteed performance from 0°C to 70°C
• Wide operating temperature range of -55°C to 100°C
• Pb free and RoHS compliant
• UL approved (No. 214129)
• VDE approved (No. 132249)
• SEMKO approved
• NEMKO approved
• DEMKO approved
Schematic
• FIMKO approved
• CSA approved (No. 2037145)
Description
The ELW135, ELW136 and ELW4503 devices each consist
1
8
1
8
2
7
2
7
3
6
3
6
4
5
4
5
of an infrared emitting diode, optically coupled to a high speed
photo detector transistor. A separate connection for the
photodiode bias and output-transistor collector increase the
speed by several orders of magnitude over conventional
phototransistor couplers by reducing the base-collector
capacitance of the input transistor.
ELW135 / ELW136
ELW4503
The devices are packaged in an 8-pin DIP wide body
package and available in wide-lead spacing and SMD
Pin Configuration
Pin Configuration
option.
1. No Connection
1. No Connection
2. Anode
2. Anode
3. Cathode
3. Cathode
Applications
4. No Connection
4. No Connection
• Line receivers
5. Gnd
5. Gnd
• Telecommunication equipments
6. Vout
6. Vout
• Power transistor isolation in motor drives
7. VB
7. No Connection
• Replacement for low speed phototransistor photo couplers
8. VCC
8. VCC
• Feedback loop in switch-mode power supplies
• Home appliances
• High speed logic ground isolation
Everlight Electronics Co., Ltd.
Document No DPC-0000108
:
1
Rev.1
http://www.everlight.com
August 2, 2011
8 PIN DIP WIDE BODY HIGH SPEED
1Mbit/s TRANSISTOR PHOTOCOUPLER
ELW135 ELW136
ELW4503
Absolute Maximum Ratings (Ta=25°C)
Parameter
Input
Symbol
Rating
Unit
Forward current
IF
25
mA
Peak forward current
(50% duty, 1ms P.W)
IFP
50
mA
Peak transient current
(≤1µs P.W,300pps)
IFtrans
1
A
Reverse voltage
VR
5
V
Power dissipation
PIN
45
mW
Power dissipation
PO
100
mW
Emitter-Base reverse
voltage
ELW135
ELW136
VEBR
5
V
Base current
ELW135
ELW136
IB
5
mA
Average Output current
IO(AVG)
8
mA
Peak Output current
IO(PK)
16
mA
Output voltage
VO
-0.5 to 20
V
Supply voltage
VCC
-0.5 to 30
V
VISO
5000
V rms
Operating temperature
TOPR
-55 ~ +100
°C
Storage temperature
TSTG
-55 ~ +125
°C
TSOL
260
°C
Output
Isolation voltage
*1
Soldering temperature
*2
Notes
*1 AC for 1 minute, R.H.= 40 ~ 60% R.H. In this test, pins 1, 2, 3, 4 are shorted together, and pins 5, 6, 7, 8
are shorted together.
*2 For 10 seconds.
Everlight Electronics Co., Ltd.
Document No DPC-0000108
:
2
Rev.1
http://www.everlight.com
August 2, 2011
ELW135 ELW136
ELW4503
8 PIN DIP WIDE BODY HIGH SPEED
1Mbit/s TRANSISTOR PHOTOCOUPLER
Electrical Characteristics (TA=0 to 70°C unless specified otherwise)
Input
Parameter
Symbol
Min.
Typ.*
Max.
Unit
Forward voltage
VF
-
1.45
1.8
V
IF = 16mA
Reverse Voltage
VR
5.0
-
-
V
IR = 10µA
∆VF/∆TA
-
-1.9
-
mV/°C
IF =16mA
Symbol
Min.
Typ.*
Max.
Unit
-
0.001
0.5
-
0.01
1
-
-
50
-
110
200
-
0.01
1
-
-
2
Temperature coefficient of
forward voltage
Conditions
Output
Parameter
Logic High Output Current
Logic Low Supply Current
Logic High Supply Current
IOH
ICCL
ICCH
Conditions
IF=0mA, VO=VCC=5.5V,
TA=25°C
µA
IF=0mA, VO=VCC=15V,
TA=25°C
IF=0mA, VO=VCC=15V
µA
IF=16mA, VO=Open,
VCC=15V
IF=0mA, VO=Open,
VCC=15V, TA=25°C
µA
IF=0mA, VO=Open,
VCC=15V
* Typical values at TA = 25°C
Everlight Electronics Co., Ltd.
Document No DPC-0000108
:
3
Rev.1
http://www.everlight.com
August 2, 2011
ELW135 ELW136
ELW4503
8 PIN DIP WIDE BODY HIGH SPEED
1Mbit/s TRANSISTOR PHOTOCOUPLER
Transfer Characteristics (TA=0 to 70°C unless specified otherwise)
Parameter
Current
Transfer Ratio
Logic Low
Output Voltage
Min.
Typ.*
Max.
ELW135
7
-
50
ELW136
ELW4503
19
-
50
5
-
-
ELW135
Symbol
CTR
Unit
Conditions
IF = 16mA ,VO = 0.4V,
VCC=4.5V, TA=25°C
%
IF = 16mA ,VO = 0.5V,
VCC=4.5V
ELW136
ELW4503
15
-
-
ELW135
-
0.18
0.4
IF = 16mA ,IO = 1.1mA,
VCC=4.5V, TA=25°C
ELW136
ELW4503
-
0.25
0.4
IF = 16mA ,IO = 3mA,
VCC=4.5V, TA=25°C
-
-
0.5
-
-
0.5
ELW135
VOL
ELW136
ELW4503
V
IF = 16mA ,IO = 0.8mA,
VCC=4.5V
IF=16mA ,IO=2.4mA,
VCC=4.5V
* Typical values at TA = 25°C
Everlight Electronics Co., Ltd.
Document No DPC-0000108
:
4
Rev.1
http://www.everlight.com
August 2, 2011
ELW135 ELW136
ELW4503
8 PIN DIP WIDE BODY HIGH SPEED
1Mbit/s TRANSISTOR PHOTOCOUPLER
Switching Characteristics (TA=0 to 70°C unless specified otherwise, IF=16mA, Vcc=5V)
Parameter
Propagation
Delay Time to
Logic Low
(Fig.8)
Propagation
Delay Time to
Logic High
(Fig.8)
Symbol
ELW135
TPHL
ELW136
ELW4503
ELW135
TPLH
ELW136
ELW4503
Common Mode ELW135
Transient
Immunity at
ELW136
Logic High
*3
(Fig.9)
ELW4503
Common Mode ELW135
Transient
Immunity at
ELW136
Logic Low
(Fig.9)*3
ELW4503
CMH
CML
Min.
Typ.*
Max.
Unit
Conditions
-
0.36
1.5
-
-
2.0
-
0.32
0.8
RL=1.9KΩ, TA=25°C
-
-
1.0
RL=1.9KΩ
-
0.45
1.5
RL=4.1KΩ, TA=25°C
-
-
2.0
RL=4.1KΩ, TA=25°C
µs
µs
RL=4.1KΩ
RL=4.1KΩ
-
0.25
0.8
RL=1.9KΩ, TA=25°C
-
-
1.0
RL=1.9KΩ
1,000
-
-
1,000
-
-
15,000
20,000
1,000
-
-
1,000
-
-
15,000
20,000
IF = 0mA , VCM=10Vp-p,
RL=4.1KΩ, TA =25°C
V/µs
V/µs
IF = 0mA , VCM=10Vp-p,
RL=1.9KΩ, TA =25°C
IF = 0mA , VCM=1500Vp-p,
RL=1.9KΩ, TA =25°C
IF = 0mA , VCM=10Vp-p,
RL=4.1KΩ, TA =25°C
IF = 0mA , VCM=10Vp-p,
RL=1.9KΩ, TA =25°C
IF = 0mA , VCM=1500Vp-p,
RL=1.9KΩ, TA =25°C
* Typical values at TA = 25°C
Everlight Electronics Co., Ltd.
Document No DPC-0000108
:
5
Rev.1
http://www.everlight.com
August 2, 2011
8 PIN DIP WIDE BODY HIGH SPEED
1Mbit/s TRANSISTOR PHOTOCOUPLER
ELW135 ELW136
ELW4503
Typical Performance Curves
Everlight Electronics Co., Ltd.
Document No DPC-0000108
:
6
Rev.1
http://www.everlight.com
August 2, 2011
8 PIN DIP WIDE BODY HIGH SPEED
1Mbit/s TRANSISTOR PHOTOCOUPLER
ELW135 ELW136
ELW4503
Figure 8 Switching Time Test Circuit & Waveform
Figure 9 Transient Immunity Test Circuit &
Waveform
Note:
*3 Common mode transient immunity in logic high level is the maximum tolerable (positive) dVcm/dt on the leading edge of
the common mode pulse signal VCM, to assure that the output will remain in a logic high state (i.e., VO > 2.0V).
Common mode transient immunity in logic low level is the maximum tolerable (negative) dVcm/dt on the trailing edge of
the common mode pulse signal, VCM, to assure that the output will remain in a logic low state (i.e., VO < 0.8V).
Everlight Electronics Co., Ltd.
Document No DPC-0000108
:
7
Rev.1
http://www.everlight.com
August 2, 2011
8 PIN DIP WIDE BODY HIGH SPEED
1Mbit/s TRANSISTOR PHOTOCOUPLER
ELW135 ELW136
ELW4503
Order Information
Part Number
ELW13XY(Z)-V
or
ELW4503Y(Z)-V
Note
X
= Part No. (X = 5 or 6)
Y
= Lead form option (S or none)
Z
= Tape and reel option (TA, TB or none)
V
= VDE (optional)
Option
Description
Packing quantity
None
Standard DIP-8
45 units per tube
M
Wide lead bend (0.4 inch spacing)
45 units per tube
S (TA)
Surface mount lead form + TA tape & reel option
1000 units per reel
S (TB)
Surface mount lead form + TB tape & reel option
1000 units per reel
Everlight Electronics Co., Ltd.
Document No DPC-0000108
:
8
Rev.1
http://www.everlight.com
August 2, 2011
8 PIN DIP WIDE BODY HIGH SPEED
1Mbit/s TRANSISTOR PHOTOCOUPLER
ELW135 ELW136
ELW4503
Package Drawing
(Dimensions in mm)
Standard DIP Type
Option S Type
Everlight Electronics Co., Ltd.
Document No DPC-0000108
:
9
Rev.1
http://www.everlight.com
August 2, 2011
8 PIN DIP WIDE BODY HIGH SPEED
1Mbit/s TRANSISTOR PHOTOCOUPLER
ELW135 ELW136
ELW4503
Recommended pad layout for surface mount leadform
Device Marking
EL
W136
YWWV
EL
W4503
YWWV
Notes
4503
W136
denotes Device Number
Y
denotes 1 digit Year code
WW
denotes 2 digit Week code
V
denotes VDE (optional)
Everlight Electronics Co., Ltd.
Document No DPC-0000108
:
10
Rev.1
http://www.everlight.com
August 2, 2011
ELW135 ELW136
ELW4503
8 PIN DIP WIDE BODY HIGH SPEED
1Mbit/s TRANSISTOR PHOTOCOUPLER
Tape & Reel Packing Specifications
Option TA
Option TB
Direction of feed from reel
Direction of feed from reel
Tape dimensions
Dimension No.
A
B
Do
D1
E
F
Dimension(mm)
14±0.1
13±0.1
1.5±0.1
1.5±0.1
1.75±0.1
7.5±0.1
Dimension No.
Po
P1
P2
t
W
K
Dimension(mm)
4.0±0.1
12.0±0.1
2.0±0.1
0.4±0.1
Everlight Electronics Co., Ltd.
Document No DPC-0000108
:
11
Rev.1
16.0+0.3/
-0.1
4.5±0.1
http://www.everlight.com
August 2, 2011
8 PIN DIP WIDE BODY HIGH SPEED
1Mbit/s TRANSISTOR PHOTOCOUPLER
ELW135 ELW136
ELW4503
Solder Reflow Temperature Profile
260 °C (peak,10 Sec Max)
>255 °C ( 30s Max )
217°°
C
1-3 °C/Sec Max
200°°
60 – 100 Sec
150°°C
60 – 150 Sec
1-3 °C/Sec Max
TIME (S)
Everlight Electronics Co., Ltd.
Document No DPC-0000108
:
12
Rev.1
http://www.everlight.com
August 2, 2011
8 PIN DIP WIDE BODY HIGH SPEED
1Mbit/s TRANSISTOR PHOTOCOUPLER
ELW135 ELW136
ELW4503
DISCLAIMER
1. Above specification may be changed without notice. EVERLIGHT will reserve authority on material change
for above specification.
2. When using this product, please observe the absolute maximum ratings and the instructions for using
outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting
from use of the product which does not comply with the absolute maximum ratings and the instructions
included in these specification sheets.
3. These specification sheets include materials protected under copyright of EVERLIGHT corporation. Please
don’t reproduce or cause anyone to reproduce them without EVERLIGHT’s consent.
Everlight Electronics Co., Ltd.
Document No DPC-0000108
:
13
Rev.1
http://www.everlight.com
August 2, 2011