ELECTRONICS METRAL® 2 mm Modular Interconnect System www.fci.com/metral 1 TABLE OF CONTENTS 2 General information 3 Catalog Main set up 4 METRAL® core product selector most popular METRAL® connector selector 5 Product finder all products 9 Application selector various applications examples Signal connectors standard header header receptacle header receptacle header receptacle straight straight right angle straight right angle straight right angle 4 row - wide body 4 row - narrow body 4 row 5 row - wide body 5 row 8 row - wide body 8 row 24 28 32 40 42 48 50 Signal connectors reversed header header receptacle header receptacle right angle right angle straight right angle straight 4 row - wide body 4 row - narrow body 4 row 5 row - wide body 5 row 54 60 66 70 76 Shrouds 4 row - wide body 5 row - wide body 8 row - wide body Power connectors standard header header receptacle header receptacle straight straight right angle straight right angle 4 row - wide body 4 row - narrow body 4 row 5 row - wide body 5 row 90 94 98 104 108 Power connectors reversed header receptacle header receptacle right angle straight right angle straight 4 row - wide body 4 row 5 row - wide body 5 row 110 122 124 130 Electrical enhanced header shroud receptacle straight 5 row 5 row (5+2 row) 5 row 134 136 138 5 row 5 row 142 144 18 82 84 86 right angle Shielded connectors header round cable connector straight High power connector high power header high power receptacle 148 150 Hybrid connectors DIN standard high power Mini power DIN standard coax Mini coax 154 158 162 166 Cable connectors signal shielded 172 176 Accessories coding keys cable connector coding keys guide pin board-to-board keying system ramping module shorting clip end wall hybrid housing 180 182 184 186 188 190 194 196 Application specific monoblocks customized designs 200 200 Technical specification Futurebus IPCI Bus electrical specs 204 205 206 PCB- lay out pcb lay out recommendations 208 Application equipment 217 Part number index 224 www.fci.com/metral FCI: SETTING THE STANDARD FOR CONNECTORS With operations in 30 countries,FCI is a leading manufacturer of connectors. Our 13,500 employees are commited to providing customers with high-quality, innovative products for a wide range of consumer and industrial applications. GENERAL INFORMATION The METRAL® connector range is the standard 2 mm board-to-board and cable-to-board interconnect system designed in accordance with IEC 61076-4-104 and Telcordia® GR-1217-CORE. Connector system used for chassis based packaging in the communications, data, medical and Industrial and Instrumentation segments. The METRAL® connector system is applicable for low speed and high speed transmission and switching equipment. Signals from 2 up to 5 Gbp/s used in backplanes, mid-planes, extension cards, power (3 up to 60 amps) and I/O applications. The Catalog presents the full range of METRAL® connectors, signal, (high) power, shielded, cable and hybrid connectors, all with various choices in dimensions, features and options. For a quick solution you can select one of the products out of the METRAL® core product selector, a selection of the most popular products out of the METRAL® family range. (see page 5 to 7) LIABILITY We believe that the information contained in this publication is the best currently available on the subject. It is offered as a possible helpful suggestion in any experimentation you may care to undertake and is subject to revision as additional knowledge and experience is gained. FCI makes no guarantee of results and assumes no obligation or liability whatsoever in connection with this information. This publication is not a license to operate under, or intended to suggest infringement of, any existing patent. Information given on the drawings in this document is not suitable for tooling design and construction. To obtain the correct drawings for these purposes, contact your local FCI representative. www.fci.com/metral 3 METRAL® CONNECTORS Catalog Main set-up STANDARD CONNECTION Straight Header on backplane / motherboard Right Angle Receptacle on the daughter card Additional choices, 4 or 5 row and signal or power REVERSED CONNECTION Straight Receptacle on backplane / motherboard Right Angle Header on the daughter card Additional choices, 4 or 5 row and signal or power 4 www.fci.com/metral Receptacle Right Angle High Speed Header Straight Power Receptacle Right Angle Signal Header Straight High Speed Shroud Coding Keys Receptacle Right Angle Signal Guide Pin Receptacle Right Angle Power DIN power Cable Connector, 1 mod Mini Coax Pin-in-Paste Solutions Cable Connector, 2 mod Receptacle Straight Signal Header Straight Straight Signal METRAL® Core Product Selector Selection of the most popular connectors out of the METRAL® family www.fci.com/metral 5 METRAL® CORE PRODUCT SELECTOR Receptacle, Right angle, Signal Signal Standard solder to board pin in paste Press Fit Module 1 2 4 8 4 row 88945-102LF 88946-102LF 88947-102LF 88948-102LF 1 2 4 8 89035-102LF 89036-102LF 89037-102LF 89038-102LF 1 52048-101LF 5 row 89047-102LF 89093-102LF 89094-102LF 89095-102LF 8 row 74770-102LF - Header, Straight, Signal Press Fit, Wide body Module 1 2 4 8 4 row 70232-116LF 70233-116LF 70234-116LF 70235-116LF Solder to Board 85863-102LF 85864-102LF 85865-102LF 85866-102LF Wide body 52049-101LF Module 1 2 4 8 Signal Reversed Receptacle, Straight, Signal 4 row 70203-111LF 70203-112LF 70203-113LF 70203-114LF 5 row 89055-111LF 89055-112LF 89055-113LF 89055-114LF 8 row 98173-102LF - Header, Right angle, Signal solder to board Press Fit Wide Body Press Fit Module 4 row 5 row 1 2 4 8 85757-1101LF 85758-1101LF 85759-1101LF 85760-1101LF 85761-1101LF 85763-1101LF - Solder to Board 1 2 4 8 HM1S41FRR000H6PLF HM1S42FRR000H6PLF HM1S43FRR000H6PLF HM1S44FRR000H6PLF HM1S51FRR000H6PLF HM1S52FRR000H6PLF HM1S53FRR000H6PLF HM1S54FRR000H6PLF Module 4 row 5 row 1 2 4 8 HM1L41LDP000H6PLF HM1L42LDP000H6PLF HM1L43LDP000H6PLF HM1L44LDP000H6PLF HM1L51LDP000H6PLF HM1L52LDP000H6PLF HM1L53LDP000H6PLF HM1L54LDP000H6PLF 1 2 4 8 HM1L41LAP000H6PLF HM1L42LAP000H6PLF HM1L43LAP000H6PLF HM1L44LAP000H6PLF 1 HM1L41LFP000H6PLF Solder to Board Wide Body solder to board HM1L51LAP000H6PLF HM1L52LAP000H6PLF HM1L53LAP000H6PLF HM1L54LAP000H6PLF Pin in Paste Wide Body Receptacle, Right angle, Power Power Standard 8 row 74771-102011LF - Shroud Pin in Paste HM1L51LFP000H6PLF Header, Straight, Power pin in paste Press Fit Module 1 4 row 88949-102LF 5 row 89096-102LF Solder to Board 1 89039-101LF 85876-102LF Pin in Paste 1 6 5 row 89006-116LF 89007-116LF 89008-116LF 89009-116LF 72651-101LF 63793-101LF www.fci.com/metral Press Fit, Wide Body Module 1 4 row 70236-101LF 5 row 89099-111LF Extended Coding Keys Accessories Guide Pin Guide Pin short, single-sided long , single-sided 70295-001LF 70295-002LF Required Header housing Wide Body Required Receptacle housing 88911-101LF 70292-101LF Colour Blue Pink Green High Speed Header, Straight, Signal, High Speed Signal 1000 Signal 2000 Signal 4000 Receptacle 85814-101LF 85814-102LF 85812-101LF Receptacle, Right Angle, High Speed 1 Module, High Speed, Press Fit 5 row 84817-101001LF 74977-101002LF 55003-101004LF Header 85813-101LF 85813-102LF 85811-101LF 1 Module, High Speed, Press Fit 8 row 74983-102011LF 74978-102001LF 55004-102002LF Signal 1000 Signal 4000 5 row 73981-102LF 52057-102LF 8 row 74981-102LF - 1000 Series Header 2000 Series Header 4000 Series Header 622Mb/s 1.25 Gb/s 1.25 Gb/s 2.5 Gb/s 2.5 Gb/s 5 Gb/s 1000 Series Receptacle 4000 Series Receptacle DIN Standard High Power Receptacle RA housing 89092-101LF Receptacle contact 85995-103LF Housing wide body 88911-101LF Contact screw pcb 91570-001LF Mini Coax Receptacle RA housing 70244-102LF Receptacle contact stb 70239-002LF Housing wide body 88913-101LF Contact stb 88980-002LF FINISHED PLATED HOLE Pin in Paste Cable Connectors Hybrid connectors Cable Connector, Signal SQUEEGEE STENCIL 1 4 row 72476-1111LF 72477-1111LF 5 row 72478-1111LF 72479-1111LF Cable Connector, Shielded positions 72 4 row 10013881-231LF SOLDER PASTE 2 3 COMPONENT ASSEMBLED 4 Module 1 2 SOLDER PASTE REFLOW SOLDERED 5 Description 4 row 5 row Receptacle, RA, Signal 52048-101LF 52049-101LF Receptacle, RA, Power 63793-101LF HM1L51LFP000H6PLF Header, RA, Signal 58361-101LF HM1K41DFP000H6PLF HM1K51DFP000H6PLF Header, RA, Power 72850-101LF - www.fci.com/metral 7 8 www.fci.com/metral METRAL® PRODUCT FINDER METRAL® PRODUCT FINDER Easy acces to select product Diversity on application examples www.fci.com/metral 9 METRAL® PRODUCT FINDER METRAL® SIGNAL CONNECTORS STANDARD housing size product description 12 mm 24 mm 48 mm 96 mm page number of lines Header Straight STB Signal wide body 4x6 4 x 12 4 x 24 4 x 48 24 Header Straight PF Signal wide body 4x6 4 x 12 4 x 24 4 x 48 26 Header Straight STB Signal narrow body 4x6 28 Header Straight PF Signal narrow body 4x6 30 Receptacle RA STB Signal - 4x6 4 x 12 4 x 24 4 x 48 32 Receptacle RA PF Signal - 4x6 4 x 12 4 x 24 4 x 48 34 Receptacle RA PIP Signal - 4x6 36 Header Straight STB Signal wide body 5x6 38 Header Straight PF Signal wide body 5x6 5 x 12 5 x 24 5 x 48 40 Receptacle RA STB Signal - 5x6 5 x 12 5 x 24 5 x 48 42 Receptacle RA PF Signal - 5x6 5 x 12 5 x 24 5 x 48 44 Receptacle RA PIP Signal - 5x6 Header Straight PF Signal wide body 8 x 12 48 Receptacle RA PF Signal - 8 x 12 50 RA = right angle, STB = solder-to-board, PF = press-fit 10 www.fci.com/metral 46 METRAL® PRODUCT FINDER METRAL® SIGNAL CONNECTORS REVERSED housing size product description 12 mm 24 mm 48 mm 96 mm page number of lines Header RA STB Signal wide body 4x6 4 x 12 4 x 24 4 x 48 54 Header RA PF Signal wide body 4x6 4 x 12 4 x 24 4 x 48 56 Header RA PIP Signal wide body 4x6 58 Header RA STB Signal narrow body 4x6 60 Header RA PF Signal narrow body 4x6 62 Header RA PIP Signal narrow body 4x6 64 Receptacle Straight STB Signal - 4x6 4 x 12 4 x 24 4 x 48 66 Receptacle Straight PF Signal - 4x6 4 x 12 4 x 24 4 x 48 68 Header RA STB Signal wide body 5x6 5 x 12 5 x 24 5 x 48 70 Header RA PF Signal wide body 5x6 5 x 12 5 x 24 5 x 48 72 Header RA PIP Signal wide body 5x6 Receptacle Straight STB Signal - 5x6 Receptacle Straight PF Signal - 5x6 74 5 x 12 5 x 24 5 x 48 5 x 24 76 78 RA = right angle, STB = solder-to-board, PF = press-fit METRAL® SHROUDS housing size product description 12 mm 24 mm 48 mm 96 mm page number of lines Shroud - - - wide body 4x6 4 x 12 4 x 24 4 x 48 82 Shroud - - - wide body 5x6 5 x 12 5 x 24 5 x 48 84 Shroud - - wide body www.fci.com/metral 8 x 12 86 11 METRAL® PRODUCT FINDER METRAL® POWER CONNECTORS STANDARD housing size product description 12 mm 24 mm 48 mm 96 mm page number of lines Header Straight STB Power wide body 4x2 90 Header Straight PF Power wide body 4x2 92 Header Straight STB Power narrow body 4x2 94 Header Straight PF Power narrow body 4x2 96 Receptacle RA STB Power - 4x2 98 Receptacle RA PF Power - 4x2 100 Receptacle RA PIP Power - 4x2 102 Header Straight STB Power wide body 5x2 104 Header Straight PF Power wide body 5x2 106 Receptacle RA STB Power - 5x2 108 Receptacle RA PF Power - 5x2 110 Receptacle RA PIP Power - 5x2 112 RA = right angle, STB = solder-to-board, PF = press-fit 12 www.fci.com/metral METRAL® PRODUCT FINDER METRAL® POWER CONNECTORS REVERSED housing size product description 12 mm 24 mm 48 mm 96 mm page number of lines Header RA STB Power wide body 4x2 116 Header RA PF Power wide body 4x2 118 Header RA PIP Power wide body 4x2 120 Receptacle Straight STB Power - 4x2 122 Header RA STB Power wide body 5x2 124 Header RA PF Power wide body 5x2 126 Header RA PIP Power wide body 5x2 128 Receptacle Straight STB Power - 5x2 130 RA = right angle, STB = solder-to-board, PF = press-fit METRAL® ELECTRICAL ENHANCED CONNECTORS housing size product description 12 mm 24 mm 48 mm 96 mm page number of lines Header Straight PF Signal wide body 5+2 134 Shroud - - - wide body 5+2 136 Receptacle RA PF Signal - 5+2 138 RA = right angle, STB = solder-to-board, PF = press-fit www.fci.com/metral 13 METRAL® PRODUCT FINDER METRAL® SHIELDED SIGNAL CONNECTORS housing size product description 12 mm 24 mm 48 mm 96 mm page number of lines Header Straight STB Cable connector Signal shielded 5x6 142 Signal shielded 5x6 144 RA = right angle, STB = solder-to-board, PF = press-fit METRAL® HIGH POWER CONNECTORS housing size product description 12 mm 24 mm 48 mm 96 mm page number of lines Header RA PF Power high power 1x2 2x2 148 Receptacle Straight PF Power high power 1x2 2x2 150 RA = right angle, STB = solder-to-board, PF = press-fit 14 www.fci.com/metral METRAL® PRODUCT FINDER METRAL® HYBRID CONNECTORS housing size product description 12 mm 24 mm 48 mm 96 mm page number of lines Header DIN standard Straight - Power high power 1 154 Receptacle DIN standard RA - Power high power 1 156 Header Mini Power RA/ Straight Power mini power 6 158 Receptacle Mini power RA - Power mini power 6 160 Header DIN standard Straight - Coax coax 1 162 Receptacle DIN standard RA - Coax coax 1 164 Header Mini Coax RA/ Straight Coax mini coax 6 166 Receptacle Mini Coax RA Coax mini coax 6 168 - RA = right angle, STB = solder-to-board, PF = press-fit www.fci.com/metral 15 METRAL® PRODUCT FINDER METRAL® CABLE CONNECTORS housing size product description 12 mm 24 mm 48 mm 96 mm page number of lines 16 Cable Connector - - Signal - 4x6 4 x 12 172 Cable Connector - - Signal - 5x6 5 x 12 174 Cable Connector - - Signal Shielded www.fci.com/metral 3 x 24 176 METRAL® PRODUCT FINDER METRAL® ACCESSORIES housing size product description 12 mm 24 mm 48 mm 96 mm page - 180 182 number of lines Coding Keys Header Cable conn. - - - - - Guide Pin - - - - 1 184 Board to Board Keying system - - - - 6 186 Ramping module - - - - 1 188 Shorting Clip Header Straight PF Signal wide body - 4 x 12 4 x 24 4 x 48 190 Shorting Clip Header Straight PF Signal wide body 5x6 - - - 192 End wall - - - - Hybrid Housing - - 194 1 196 RA = right angle, STB = solder-to-board, PF = press-fit www.fci.com/metral 17 METRAL® APPLICATION EXAMPLES METRAL® 4 row assemblies UNMATED 18 MATED www.fci.com/metral METRAL® APPLICATION EXAMPLES METRAL® 5 row assemblies UNMATED MATED www.fci.com/metral 19 METRAL® APPLICATION EXAMPLES METRAL® 8 row assemblies UNMATED MATED METRAL® DIN High Power assemblies UNMATED MATED 91570 88977 70424 (kit) wide body 88911 narrow body 70290 70201 20 www.fci.com/metral METRAL® APPLICATION EXAMPLES METRAL® DIN standard Coax assemblies UNMATED MATED 89092 wide body 88911 narrow body 70290 93904 70200 METRAL® Mini Power assemblies UNMATED MATED 85973 88982 85975 wide body 88911 narrow body 70290 70244 85976 85972 METRAL® Mini Coax assemblies UNMATED MATED 88978 88982 89030 wide body 88913 narrow body 70243 70244 70239 88971 www.fci.com/metral 21 22 www.fci.com/metral SIGNAL CONNECTORS METRAL® SIGNAL CONNECTORS STANDARD METRAL® SIGNAL CONNECTORS STANDARD Header, 4 row, straight, wide body Header, 4 row, straight, narrow body Receptacle, 4 row, right angle Header, 5 row, straight, wide body Header, 5 row, straight, narrow body Receptacle, 5 row, right angle Header, 8 row, straight, wide body Receptacle, 8 row, right angle www.fci.com/metral 23 SIGNAL CONNECTORS METRAL® SIGNAL CONNECTORS STANDARD Header, 4 row, signal, straight, solder to board, wide body FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) 4 Rows and 2 mm pitch permit high signal density (200 contacts per 100 mm connector length). Stackable end-to-end without loss of positions. Stackable with other METRAL™ function modules (e.g. power, coax, guide pin). First Make Last Break options. TECHNICAL DATA PHYSICAL MATING DATA spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP, colour natural flammability rating: UL 94 V-0 pin material: phosphor bronze performance level: Telcordia CO Receptacle, right angle, press-fit, page 34 1 mod – part number 88945-102LF 2 mod – part number 88946-102LF 4 mod – part number 88947-102LF 8 mod – part number 88948-102LF ELECTRICAL current rating: 1 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) Receptacle, right angle, solder-to-board, page 32 1 mod – part numbers 89035-102LF 2 mod – part numbers 89036-102LF 4 mod – part numbers 89037-102LF 8 mod - part numbers 89038-102LF MECHANICAL PERFORMANCE insertion force: 0,45 N max. per individual signal contact (mating) withdrawal force: 0,15 N max. per individual signal contact (unmating) recommended hole diameter: 0,65-0,80 mm Receptacle, right angle, Pin-in-Paste, page 36 1 mod – part numbers 52048-101LF ENVIRONMENTAL Operating temperature range: -55˚C to +125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC TYPICAL APPLICATIONS PACKAGING standard: tubes PROCESSING INFORMATION applicable soldering process: wave, IR, vapor phase REFERENCE DATA product specification.: GS-12-180 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 24 www.fci.com/metral PRODUCT 11.93 2 1.4 1 Module 88951-1yyLF 10 1 17 3.45 2.3 6 D C B A 6 11.5 15.8 0.5 2 B 2 23.93 SIGNAL CONNECTORS Header, 4 row, signal, straight, solder to board, wide body A 2 Module 88952-1yyLF 47.93 4 Module 88953-1yyLF 95.93 8 Module 88954-1yyLF PCB pattern P5, see chapter PCB layouts PARTNUMBERS 8895x - 1yyLF Base Part Number 88951 = 1 module (4 x 6 pos.) 88952 = 2 module (4 x 12 pos.) 88953 = 4 module (4 x 24 pos.) 88954 = 8 module (4 x 48 pos.) Performance Pin Configuration LF 1 = Telcordia CO LF = lead free yy mating length (A) tail length(B) 01 5,00 mm 4,25 mm 05 6,50 mm 4,25 mm 31 5,00 mm 3,30 mm 35 6,50 mm 3,30 mm 61 5,00 mm 2,65 mm A B Note: for other special patterns or loadings, please check drawings, all other configurations on request only www.fci.com/metral 25 SIGNAL CONNECTORS METRAL® SIGNAL CONNECTORS STANDARD Header, 4 row, signal, straight, press-fit, wide body FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) 4 row and 2 mm pitch permit high signal density ( 200 contacts per 100mm connector length) Modular design guarantees flexibility Eye of the needle press-fit contact TECHNICAL DATA PHYSICAL spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP, colour natural flammability rating: UL 94 V-0 pin material: phosphor bronze performance level: Telcordia CO MATING DATA Receptacle, right angle, press-fit, page 34 1 mod – part number 88945-102LF 2 mod – part number 88946-102LF 4 mod – part number 88947-102LF 8 mod – part number 88948-102LF ELECTRICAL current rating: 1 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) Receptacle, right angle, solder-to-board, page 32 MECHANICAL PERFORMANCE insertion force: 0,45 N max. per individual signal contact (mating) withdrawal force: 0,15 N max. per individual signal contact (unmating) 1 mod – part numbers 89035-101LF 2 mod – part numbers 89036-101LF 4 mod – part numbers 89037-101LF 8 mod - part numbers 89038-101LF Receptacle right angle, Pin-in-Paste, page 36 press-fit contact insertion: 65 N max. per pin press-fit pin withdrawal: 15 N min. per pin recommended hole diameter: 0,65-0,80 mm 1 mod – part numbers 52048-101LF ENVIRONMENTAL TYPICAL APPLICATIONS Operating temperature range: -55˚C to +125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC PACKAGING standard: tubes PROCESSING INFORMATION Applicable process: press-fit REFERENCE DATA product specification.: GS-12-180 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223. 26 www.fci.com/metral PRODUCT 11.93 1 6 1 1 Module 70232-1yyLF 6 10 2 17 3.45 6 2.30 D C B A 2 1.4 SIGNAL CONNECTORS Header, 4 row, signal, straight, press-fit, wide body 15.80 11.50 0.5 2 A 1 23.93 B 12 2 Module 70233-1yyLF 1 47.93 24 4 Module 70234-1yyLF 95.93 1 48 8 Module 70235-1yyLF PCB pattern P6, see chapter PCB layouts PARTNUMBERS 7023x - 1yyLF Base Part Number 70232 = 1 module (4 x 6 pos.) 70233 = 2 module (4 x 12 pos.) 70234 = 4 module (4 x 24 pos.) 70235 = 8 module (4 x 48 pos.) Performance Pin Configuration LF 1 = Telcordia CO LF = lead free yy mating length (A) tail length (B) 11 5,00 mm 4,30 mm 16 5,75 mm 4,30 mm 15 6,50 mm 4,30 mm 21 5,00 mm 13,60 mm 26 5,75 mm 13,60 mm 25 6,50 mm 13,60 mm A B Note: blue marked in pin configuration is the preferred recommended standard for other special patterns or loadings, please check drawings, all other configurations on request only www.fci.com/metral 27 SIGNAL CONNECTORS METRAL® SIGNAL CONNECTORS STANDARD Header, 4 row, signal, straight, solder to board, narrow body FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) 4 Rows and 2 mm pitch permit high signal density (200 contacts per 100 mm connector length). Stackable end-to-end without loss of positions. Stackable with other METRAL™ function modules (e.g. power, coax, guide pin). First Make Last Break options. TECHNICAL DATA PHYSICAL spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP, colour natural flammability rating: UL 94 V-0 pin material: phosphor bronze performance level: Telcordia CO MATING DATA Receptacle, straight ELECTRICAL 1 mod – pf - part number 85757-1101LF, 1 mod – stb - part nr HM1S41FRR000H6PLF, current rating: 1 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) Receptacle, right angle MECHANICAL PERFORMANCE insertion force: 0,45 N max. per individual signal contact (mating) withdrawal force: 0,15 N max. per individual signal contact (unmating) recommended hole diameter: 0,65-0,80 mm 1 mod – pf - part number 88945-102LF, 1 mod – stb -part number 89035-102LF, 1 mod – pip - part number 52048-101LF, ENVIRONMENTAL TYPICAL APPLICATIONS Operating temperature range: -55˚C to +125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC PACKAGING standard: tubes PROCESSING INFORMATION applicable soldering process: wave, IR, vapor phase REFERENCE DATA product specification.: GS-12-180 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 28 page 69 page 67 www.fci.com/metral page 35 page 33 page 37 SIGNAL CONNECTORS Header, 4 row, signal, straight, solder to board, narrow body PRODUCT 1.4 1 Module 70264-1yyLF 6 15.9 10 2 3.5 6 1 D C B 2 13.8 11.5 A 0.50 B A 11.92 PCB pattern P3, see chapter PCB layouts PARTNUMBERS 70264 - 1yyLF Base Part Number 70264 = 1 module (4 x 6 pos.) Performance Pin Configuration LF 1 = Telcordia CO LF = lead free yy mating length (A) tail length (B) 01 5,00 mm 4,25 mm 05 6,50 mm 4,25 mm A B Note: for other special patterns or loadings, please check drawings, all other configurations on request only www.fci.com/metral 29 SIGNAL CONNECTORS METRAL® SIGNAL CONNECTORS STANDARD Header, 4 row, signal, straight, press-fit, narrow body FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) 4 Rows and 2 mm pitch permit high signal density (200 contacts per 100 mm connector length). Stackable end-to-end without loss of positions. Stackable with other METRAL™ function modules (e.g. power, coax, guide pin). First Make Last Break options. Eye the needle press-fit contact TECHNICAL DATA PHYSICAL spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP, colour natural flammability rating: UL 94 V-0 pin material: phosphor bronze performance level: Telcordia CO MATING DATA Receptacle, straight ELECTRICAL current rating: 1 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) 1 mod – pf - part number 85757-1101LF, 1 mod – stb - part nr HM1S41FRR000H6PLF, Receptacle, right angle MECHANICAL PERFORMANCE insertion force: 0,45 N max. per individual signal contact (mating) withdrawal force: 0,15 N max. per individual signal contact (unmating) 1 mod – pf - part number 88945-102LF, 1 mod – stb -part number 89035-102LF, 1 mod – pip - part number 52048-101LF, press-fit contact insertion: 65 N max. per pin press-fit pin withdrawal: 15 N min. per pin recommended hole diameter: 0,65-0,80 mm TYPICAL APPLICATIONS ENVIRONMENTAL Operating temperature range: -55˚C to +125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC PACKAGING standard: tubes PROCESSING INFORMATION press fit REFERENCE DATA product specification.: GS-12-180 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 30 page 69 page 67 www.fci.com/metral page 35 page 33 page 37 SIGNAL CONNECTORS Header, 4 row, signal, straight, press-fit, narrow body PRODUCT 10 1.4 1 Module 85826-1yyLF 6 15.9 2 1 6 D 2 C B A 11.5 13.8 0.5 A B 3.5 11.92 PCB pattern P4, see chapter PCB layouts PARTNUMBERS 85826 - 1yyLF Base Part Number 85826 = 1 module (4 x 6 pos.) Performance Pin Configuration LF 1 = Telcordia CO LF = lead free yy mating length (A) tail length (B) 01 5,00 mm 4,25 mm A B Note: for other special patterns or loadings, please check drawings, all other configurations on request only www.fci.com/metral 31 SIGNAL CONNECTORS METRAL® SIGNAL CONNECTORS STANDARD Receptacle, 4 row, signal, right angle, solder to board FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) 4 row and 2 mm pitch permit high signal density (200 contacts per 100mm connector length) Modular design guarantees flexibility Stackable end-to-end without loss of position Stackable with other METRAL® function modules (power, I/O) Reliable dual beam box contact Stable PCB fixation device Low profile allows PCB spacing of 14mm TECHNICAL DATA MATING DATA PHYSICAL spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP, colour natural flammability rating: UL 94 V-0 contact material: phosphor bronze performance level: Telcordia CO Header, straight, press-fit, page 27 1 module – part number 70232-116LF 2 modules – part number 70233-116LF 4 modules – part number 70234-116LF 8 modules – part number 70235-116LF ELECTRICAL current rating: 1 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) Headerstraight, solder-to-board, page 25 MECHANICAL PERFORMANCE insertion force: 0,45 N max. per individual signal contact (mating) withdrawal force: 0,15 N max. per individual signal contact (unmating) Recommended hole diameter: 0,65 – 0,80 mm ENVIRONMENTAL Operating temperature range: -55˚C to +125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC 1 module – part number 88951-101LF 2 modules – part number 88952-101LF 4 modules – part number 88953-101LF 8 modules – part number 88954-101LF TYPICAL APPLICATIONS PACKAGING standard: tubes PROCESSING INFORMATION Applicable process: wave, IR, vapor phase REFERENCE DATA Press-peg application, TA-0941 product specification.: GS-12-453 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 32 www.fci.com/metral PRODUCT 11.95 21.14 10 6 1 Module 89035-1yyLF SIGNAL CONNECTORS Receptacle, 4 row, signal, right angle, solder to board 12.44 2 1 D C B 11.3 A B 2.98 1.5 23.95 1 22 2 Module 89036-1yyLF 12 4 1 D C B 4 2 A 2 4 9.50 6 47.95 4 Module 89037-1yyLF 24 46 1 D C B A 95.95 94 8 Module 89038-1yyLF 48 1 D C B A PCB pattern P1, see chapter PCB layouts PARTNUMBERS 8903x - 1yyLF Base Part Number 89035 = 1 module (4 x 6 pos.) 89036 = 2 module (4 x 12 pos.) 89037 = 4 module (4 x 24 pos.) 89038 = 8 module (4 x 48 pos.) Performance Pin Configuration LF 1 = Telcordia CO LF = lead free yy tail length (B) PCB thickness 02 2,90 mm 1,60 mm 12 3,53 mm 2,40 mm www.fci.com/metral B 33 SIGNAL CONNECTORS METRAL® SIGNAL CONNECTORS STANDARD Receptacle, 4 row, signal, right angle, press fit FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) 4 row and 2 mm pitch permit high signal density (200 contacts per 100mm connector length) Modular design guarantees flexibility Stackable end-to-end without loss of position Stackable with other METRAL® function modules (power, I/O) Reliable dual beam box contact Stable PCB fixation device Press block ensures accurate position of press-fit tails for easy mounting Eye the needle press-fit contact Low profile allows PCB spacing of 14mm TECHNICAL DATA MATING DATA PHYSICAL spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP, colour natural flammability rating: UL 94 V-0 contact material: phosphor bronze performance level: Telcordia CO Header, straight, press-fit, page 27 1 module – part number 70232-116LF 2 modules – part number 70233-116LF 4 modules – part number 70234-116LF 8 modules – part number 70235-116LF ELECTRICAL current rating: 1 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) Header, straight, solder-to-board, page 25 MECHANICAL PERFORMANCE insertion force: 0,45 N max. per individual signal contact (mating) withdrawal force: 0,15 N max. per individual signal contact (unmating) press-fit contact insertion: 55 N max. per pin press-fit pin withdrawal: 15 N min. per pin recommended hole diameter: 0,65-0,80 mm 1 module – part number 88951-101LF 2 modules – part number 88952-101LF 4 modules – part number 88953-101LF 8 modules – part number 88954-101LF TYPICAL APPLICATIONS ENVIRONMENTAL Operating temperature range: -55˚C to +125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC PACKAGING standard: tubes PROCESSING INFORMATION press fit REFERENCE DATA Press-peg application, TA-0941 product specification.: GS-12-453 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 34 www.fci.com/metral PRODUCT SIGNAL CONNECTORS Receptacle, 4 row, signal, right angle, press fit 21.15 12.44 11.95 10 2 11.3 1 Module 88945-1yyLF B 1.5 23.95 22 4 2 4 2 Module 88946-1yyLF 2 4 9.5 6 47.95 46 4 Module 88947-1yyLF 95.95 94 8 Module 88948-1yyLF PCB pattern P1, see chapter PCB layouts PARTNUMBERS 8894x - 1yyLF Base Part Number 88945 = 1 module (4 x 6 pos.) 88946 = 2 module (4 x 12 pos.) 88947 = 4 module (4 x 24 pos.) 88948 = 8 module (4 x 48 pos.) Performance Pin Configuration LF 1 = Telcordia CO LF = lead free yy tail length (B) PCB thickness 02 2,90 mm 1,60 mm 12 3,53 mm 2,40 mm B Note: blue marked in pin configuration is the preferred recommended standard for other special patterns or loadings, please check drawings, all other configurations on request only www.fci.com/metral 35 SIGNAL CONNECTORS METRAL® SIGNAL CONNECTORS STANDARD Receptacle, 4 row, signal, right angle, pin-in-paste FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) 4 row and 2 mm pitch permit high signal density, 1 module (4 x 6 positions) Modular design guarantees flexibility Stackable end-to-end without loss of position Stackable with other METRAL® function modules (power, I/O) Tuning fork, forced controlled contact Stable PCB fixation device Low profile allows PCB spacing of 14mm MATING DATA TECHNICAL DATA PHYSICAL spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP (30% glass), colour natural flammability rating: UL 94 V-0 contact material: phosphor bronze performance level: Telcordia CO Header, straight, press-fit, page 27 1 module – part number 70232-116LF Header, straight, solder-to-board, page 25 ELECTRICAL current rating: 1 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) 1 module – part number 88951-101LF MECHANICAL PERFORMANCE Maximum mounting force, 20 N per connector insertion force: 0,45 N max. per individual signal contact (mating) withdrawal force: 0,15 N max. per individual signal contact (unmating) Recommended hole diameter: 0,65 – 0,80 mm TYPICAL APPLICATIONS ENVIRONMENTAL Operating temperature -55˚C to + 125˚C Max. temperature 260˚C for 30 seconds RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC PACKAGING Tape&reel PROCESSING INFORMATION Pick&place by vacuum nozzle or mechanical gripper automatic Surface-mount reflow process, resistance for Lead Free reflow temperature REFERENCE DATA Product specification GS-12-215 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 36 www.fci.com/metral SIGNAL CONNECTORS Receptacle, 4 row, signal, right angle, pin-in-paste PRODUCT 20.75 10 2 8.05 2.2 9.3 8.8 B 2.1 11.9 10 2 5 2 9.5 4 6 PCB pattern P1, see chapter PCB layouts PARTNUMBERS 52048 - 1yyLF Base Part Number 52048 = 1 module (4 x 6 pos.) Performance Pin Configuration LF 1 = Telcordia CO LF = lead free yy tail length (B) PCB thickness 01 2,80 mm 1,60 mm B Note: blue marked in pin configuration is the preferred recommended standard for other special patterns or loadings, please check drawings, all other configurations on request only www.fci.com/metral 37 SIGNAL CONNECTORS METRAL® SIGNAL CONNECTORS STANDARD Header, 5 row, signal, straight, solder to board, wide body FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) 5 Rows and 2 mm pitch permit high signal density (200 contacts per 100 mm connector length). Stackable end-to-end without loss of positions. Stackable with other METRAL™ function modules (e.g. power, coax, guide pin). First Make Last Break options. TECHNICAL DATA PHYSICAL spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP, colour natural flammability rating: UL 94 V-0 pin material: phosphor bronze performance level: Telcordia CO MATING DATA Receptacle, right angle, press-fit, page 45 1 mod – part number 89047-102LF 2 mod – part number 89093-102LF 4 mod – part number 89094-102LF 8 mod – part number 89095-102LF ELECTRICAL current rating: 1 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) Receptacle, right angle, solder-to-board, page 43 MECHANICAL PERFORMANCE insertion force: 0,45 N max. per individual signal contact (mating) withdrawal force: 0,15 N max. per individual signal contact (unmating) recommended hole diameter: 0,65-0,80 mm ENVIRONMENTAL Operating temperature range: -55˚C to +125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC 1 mod – part numbers 85863-102LF 2 mod – part numbers 85864-102LF 4 mod – part numbers 85865-102LF 8 mod - part numbers 85866-102LF TYPICAL APPLICATIONS PACKAGING standard: tubes PROCESSING INFORMATION applicable soldering process: wave, IR, vapor phase REFERENCE DATA product specification.: GS-12-180 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 38 www.fci.com/metral PRODUCT 2 11.93 1 2 1 Module 74741-1yyLF 10 17 2.3 3.45 6 E D C B A 8 13.5 SIGNAL CONNECTORS Header, 5 row, signal, straight, solder to board, wide body 17.8 0.5 1.4 2 B A 23.93 2 Module 7474x-1yyLF on request only 47.93 4 Module 7474x-1yyLF on request only 95.93 8 Module 7474x-1yyLF on request only PCB pattern P16, see chapter PCB layouts PARTNUMBERS 74741 - 1yyLF Base Part Number 74741 on request only on request only on request only = 1 module (5 x 6 pos.) = 2 module (5 x 12 pos.) = 4 module (5 x 24 pos.) = 8 module (5 x 48 pos.) Performance Pin Configuration LF LF = lead free 1 = Telcordia CO yy mating length (A) tail length (B) 63 5,00 mm 4,25 mm 01 6,50 mm 4,25 mm 79 5,00 mm 3,30 mm 31 6,50 mm 3,30 mm A B Note: for other special patterns or loadings, please check drawings, all other configurations on request only www.fci.com/metral 39 SIGNAL CONNECTORS METRAL® SIGNAL CONNECTORS STANDARD Header, 5 row, signal, straight, press-fit, wide body FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+). 5 Rows and 2 mm pitch permit high signal density (200 contacts per 100 mm connector length). Stackable end-to-end without loss of positions. Stackable with other METRAL™ function modules (e.g. power, coax, guide pin). First Make Last Break options. Eye the needle press-fit contact TECHNICAL DATA PHYSICAL spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP, colour natural flammability rating: UL 94 V-0 pin material: phosphor bronze performance level: Telcordia CO MATING DATA Receptacle, right angle, press-fit, page 45 ELECTRICAL current rating: 1 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) 1 mod – part number 89047-102LF 2 mod – part number 89093-102LF 4 mod – part number 89094-102LF 8 mod – part number 89095-102LF MECHANICAL PERFORMANCE insertion force: 0,45 N max. per individual signal contact (mating) withdrawal force: 0,15 N max. per individual signal contact (unmating) press-fit contact insertion: 65 N max. per pin press-fit pin withdrawal: 15 N min. per pin recommended hole diameter: 0,65-0,80 mm ENVIRONMENTAL Operating temperature range: -55˚C to +125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC Receptacle, right angle, solder-to-board, page 43 1 mod – part numbers 85863-102LF 2 mod – part numbers 85864-102LF 4 mod – part numbers 85865-102LF 8 mod - part numbers 85866-102LF TYPICAL APPLICATIONS PACKAGING standard: tubes PROCESSING INFORMATION press fit REFERENCE DATA product specification.: GS-12-180 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 40 www.fci.com/metral PRODUCT 11.93 1.40 1 Module 89006-1yyLF 8.00 1 2 2 10 17 6 SIGNAL CONNECTORS Header, 5 row, signal, straight, press-fit, wide body 3.45 2.30 E D C B A 13.50 17.80 0.50 2 1 23.93 A B 12 2 Module 89007-1yyLF 47.93 1 24 4 Module 89008-1yyLF 95.93 48 1 8 Module 89009-1yyLF PCB pattern P7, see chapter PCB layouts PARTNUMBERS 8900x - 1yyLF Base Part Number 89006 = 1 module (5 x 6 pos.) 89007 = 2 module (5 x 12 pos.) 89008 = 4 module (5 x 24 pos.) 89009 = 8 module (5 x 48 pos.) Performance Pin Configuration 1 = Telcordia CO LF LF = lead free yy mating length (A) tail length (B) 11 5,00 mm 4,30 mm 16 5,75 mm 4,30 mm 15 6,50 mm 4,30 mm 21 5,00 mm 13,60 mm 26 5,75 mm 13,60 mm 25 6,50 mm 13,60 mm row A = 5,00 mm 4,30 mm first-make last-brake 44 row B = 6,50 mm 4,30 mm row C = 7,25 mm 4,30 mm row D = 6,50 mm 4,30 mm row E = 5,00 mm 4,30 mm A B Note: blue marked in pin configuration is the preferred recommended standard for other special patterns or loadings, please check drawings, all other configurations on request only www.fci.com/metral 41 SIGNAL CONNECTORS METRAL® SIGNAL CONNECTORS STANDARD Receptacle, 5 row, signal, right angle, solder to board FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) 5 row and 2 mm pitch permit high signal density (250 contacts per 100 mm connector length) Modular design guarantees flexibility Stackable end-to-end without loss of position Stackable with other METRAL® function modules (power, I/O) Reliable dual beam box contact Stable PCB fixation device TECHNICAL DATA PHYSICAL spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP, colour natural flammability rating: UL 94 V-0 contact material: phosphor bronze performance level: Telcordia CO MATING DATA Header straight, press-fit, page 41 1 module – part number 89006-116LF 2 modules – part number 89007-116LF 4 modules – part number 89008-116LF 8 modules – part number 89009-116LF ELECTRICAL current rating: 1 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) Header straight, solder-to-board, page 39 MECHANICAL PERFORMANCE insertion force: 0,45 N max. per individual signal contact (mating) withdrawal force: 0,15 N max. per individual signal contact (unmating) Recommended hole diameter: 0,65 – 0,80 mm 1 module – part number 74741-101LF 2 modules – on request only 4 modules – on request only 8 modules – on request only ENVIRONMENTAL Operating temperature range: -55˚C to +125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC TYPICAL APPLICATIONS PACKAGING standard: tubes PROCESSING INFORMATION Applicable process: wave, IR, vapor phase REFERENCE DATA Press-peg application, TA-0941 product specification.: GS-12-453 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 42 www.fci.com/metral SIGNAL CONNECTORS Receptacle, 5 row, signal, right angle, solder to board PRODUCT 6 1 Module 85863-1yyLF 11.95 1 6 5 E D C B A 12 2 Module 85864-1yyLF 23.95 1 E D C B A 24 4 Module 85865-1yyLF 2 1 E D C B A 47.95 1 E D C B A 95.95 48 8 Module 85866-1yyLF 1 E D C B A PCB pattern P2, see chapter PCB layouts PARTNUMBERS 8586x - 1yyLF Base Part Number 85863 = 1 module (5 x 6 pos.) 85864 = 2 module (5 x 12 pos.) 85865 = 4 module (5 x 24 pos.) 85866 = 8 module (5 x 48 pos.) Performance Pin Configuration LF 1 = Telcordia CO LF = lead free yy tail length (B) PCB thickness 02 2,90 mm 1,60 mm 12 3,53 mm 2,40 mm www.fci.com/metral B 43 SIGNAL CONNECTORS METRAL® SIGNAL CONNECTORS STANDARD Receptacle, 5 row, signal, right angle, press fit FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) 5 row and 2 mm pitch permit high signal density (250 contacts per 100 mm connector length) Modular design guarantees flexibility Stackable end-to-end without loss of position Stackable with other METRAL® function modules (power, I/O) Reliable dual beam box contact Stable PCB fixation device Press block ensures accurate position of press-fit tails for easy mounting Eye the needle press-fit contact TECHNICAL DATA MATING DATA PHYSICAL spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP, colour natural flammability rating: UL 94 V-0 contact material: phosphor bronze performance level: Telcordia CO Header straight, press-fit, page 41 1 module – part number 89006-116LF 2 modules – part number 89007-116LF 4 modules – part number 89008-116LF 8 modules – part number 89009-116LF ELECTRICAL current rating: 1 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) Header straight, solder-to-board, page 39 MECHANICAL PERFORMANCE insertion force: 0,45 N max. per individual signal contact (mating) withdrawal force: 0,15 N max. per individual signal contact (unmating) press-fit contact insertion: 55 N max. per pin press-fit pin withdrawal: 15 N min. per pin recommended hole diameter: 0,65-0,80 mm 1 module – part number 74741-101LF 2 modules – on request only 4 modules – on request only 8 modules – on request only TYPICAL APPLICATIONS ENVIRONMENTAL Operating temperature range: -55˚C to +125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC PACKAGING standard: tubes PROCESSING INFORMATION press fit REFERENCE DATA Press-peg application, TA-0941 product specification.: GS-12-453 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223. 44 www.fci.com/metral PRODUCT 6 1 Module 89047-1yyLF 11.95 SIGNAL CONNECTORS Receptacle, 5 row, signal, right angle, press fit 23.15 1 2 E D 11.35 C B A B 3.08 1.50 12 2 Module 89093-1yyLF 23.95 1 E D C B A 2 24 4 Module 89094-1yyLF 4 47.95 1 8 E 9.5 D C B A 95.95 48 8 Module 89095-1yyLF 1 E D C B A PCB pattern P2, see chapter PCB layouts PARTNUMBERS 8904x - 1yyLF Base Part Number 89047 = 1 module (5 x 6 pos.) 89093 = 2 module (5 x 12 pos.) 89094 = 4 module (5 x 24 pos.) 89095 = 8 module (5 x 48 pos.) Performance Pin Configuration LF 1 = Telcordia CO LF = lead free yy tail length (B) PCB thickness 02 2,90 mm 1,60 mm 12 3,53 mm 2,40 mm B Note: blue marked in pin configuration is the preferred recommended standard for other special patterns or loadings, please check drawings, all other configurations on request only www.fci.com/metral 45 SIGNAL CONNECTORS METRAL® SIGNAL CONNECTORS STANDARD Receptacle, 5 row, signal, right angle, pin-in-paste FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) 5 row and 2 mm pitch permit high signal density, 1 module (5 x 6 positions) Modular design guarantees flexibility Stackable end-to-end without loss of position Stackable with other METRAL® function modules (power, I/O) Tuning fork, forced controlled contact Stable PCB fixation device Low profile allows PCB spacing of 14mm TECHNICAL DATA MATING DATA PHYSICAL spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP (30% glass), colour natural flammability rating: UL 94 V-0 contact material: phosphor bronze performance level: Telcordia CO Header, straight, press-fit, page 41 1 module – part number 89006-116LF Header, straight, solder-to-board, page 39 ELECTRICAL current rating: 1 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) 1 module – part number 74741-101LF MECHANICAL PERFORMANCE Maximum mounting force, 20 N per connector insertion force: 0,45 N max. per individual signal contact (mating) withdrawal force: 0,15 N max. per individual signal contact (unmating) Recommended hole diameter: 0,65 – 0,80 mm ENVIRONMENTAL Operating temperature -55˚C to + 125˚C Max. temperature 260˚C for 30 seconds RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC TYPICAL APPLICATIONS PACKAGING Tape&reel PROCESSING INFORMATION Pick&place by vacuum nozzle or mechanical gripper automatic Surface-mount reflow process, resistance for Lead Free reflow temperature REFERENCE DATA Product specification GS-12-215 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 46 www.fci.com/metral SIGNAL CONNECTORS Receptacle, 5 row, signal, right angle, pin-in-paste PRODUCT 2 22.75 10 2.2 10.05 11.3 10.8 2.1 B 11.9 10 2 9.5 5 2 4 8 PCB pattern P2, see chapter PCB layouts PARTNUMBERS 52049 - 101LF Base Part Number 52049 = 1 module (5 x 6 pos.) Performance Pin Configuration LF 1 = Telcordia CO LF = lead free yy tail length (B) PCB thickness 01 2,80 mm 1,60 mm B Note: blue marked in pin configuration is the preferred recommended standard for other special patterns or loadings, please check drawings, all other configurations on request only www.fci.com/metral 47 SIGNAL CONNECTORS METRAL® SIGNAL CONNECTORS STANDARD Header, 8 row, signal, straight, press fit, wide body FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) 8 row and 2 mm pitch permit high signal density ( 800 contacts per 100mm connector length) 2 modules header, 8 rows by 6 position Baby H-shape press-fit contact TECHNICAL DATA PHYSICAL spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP, colour natural flammability rating: UL 94 V-0 pin material: phosphor bronze performance level: Telcordia CO MATING DATA Receptacle, right angle, press-fit, page 51 part number 74770-102LF ELECTRICAL current rating: 1 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) MECHANICAL PERFORMANCE insertion force: 0,45 N max. per individual signal contact (mating) withdrawal force: 0,15 N max. per individual signal contact (unmating) press-fit contact insertion: 65 N max. per pin press-fit pin withdrawal: 15 N min. per pin recommended hole diameter: 0,65-0,80 mm TYPICAL APPLICATIONS ENVIRONMENTAL Operating temperature range: -55˚C to +125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC PACKAGING standard: tubes PROCESSING INFORMATION press fit REFERENCE DATA product specification.: GS-12-134 application specification: GS-20-010 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 48 www.fci.com/metral SIGNAL CONNECTORS Header, 8 row, signal, straight, press fit, wide body PRODUCT 23.88 17 2.3 A 22 24.15 20.35 B 3.4 PCB pattern P21, see chapter PCB layouts PARTNUMBERS 74771 - 102011LF Base Part Number 74771 = 8 row straight header Performance 1 = Telcordia CO Pin Configuration Pin Configuration LF 02 = 2 modules, 8x12 pos. LF = lead free yyy mating length (A) tail length (B) 011 6,50 mm 17,10 mm A B Note: blue marked in pin configuration is the preferred recommended standard for other special patterns or loadings, please check drawings, all other configurations on request only www.fci.com/metral 49 SIGNAL CONNECTORS METRAL® SIGNAL CONNECTORS STANDARD Receptacle, 8 row, signal, right angle, press fit FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) 8 row and 2 mm pitch permit high signal density ( 800 contacts per 100mm connector length) 2 modules header, 8 rows by 6 position Eye of the needle press-fit contact Tuning fork, forced controlled contact TECHNICAL DATA PHYSICAL spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP, colour natural flammability rating: UL 94 V-0 pin material: phosphor bronze performance level: Telcordia CO MATING DATA ELECTRICAL current rating: 1 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) Receptacle, right angle, press-fit, page 49 part number 74771-102011LF MECHANICAL PERFORMANCE insertion force: 0,45 N max. per individual signal contact (mating) withdrawal force: 0,15 N max. per individual signal contact (unmating) press-fit contact insertion: 55 N max. per pin press-fit pin withdrawal: 15 N min. per pin recommended hole diameter: 0,65-0,80 mm ENVIRONMENTAL Operating temperature range: -55˚C to +125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC TYPICAL APPLICATIONS PACKAGING standard: tubes PROCESSING INFORMATION press fit REFERENCE DATA product spec.: GS-12-134 application specification: GS-20-010 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 50 www.fci.com/metral SIGNAL CONNECTORS Receptacle, 8 row, signal, right angle, press fit PRODUCT 2 29.4 23.98 20.7 16 16.8 20.20 B A B C D E F G H 5.6 2 9.5 PCB pattern P22, see chapter PCB layouts PARTNUMBERS 74770 - 102LF Base Part Number 74770 = 2 module (8 x 12 pos.) Performance Pin Configuration LF 1 = Telcordia CO LF = lead free yy tail length (B) PCB thickness 02 3,53 mm 1,30 to 3,40 mm B Note: blue marked in pin configuration is the preferred recommended standard for other special patterns or loadings, please check drawings, all other configurations on request only www.fci.com/metral 51 SIGNAL CONNECTORS 52 www.fci.com/metral SIGNAL CONNECTORS METRAL® SIGNAL CONNECTORS REVERSED METRAL® SIGNAL CONNECTORS REVERSED Header, 4 row, right angle, wide body Header, 4 row, right angle, narrow body Receptacle, 4 row, straight Header, 5 row, right angle, wide body Header, 5 row, right angle, narrow body Receptacle, 4 row, straight www.fci.com/metral 53 SIGNAL CONNECTORS METRAL® SIGNAL CONNECTORS REVERSED Header, 4 row, signal, right angle, solder to board, wide body FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) 4 row and 2 mm pitch permit high signal density ( 200 contacts per 100mm connector length) Modular design guarantees flexibility TECHNICAL DATA PHYSICAL spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP, colour natural flammability rating: UL 94 V-0 pin material: phosphor bronze performance level: Telcordia CO MATING DATA Receptacle, straight, press-fit, page 69 ELECTRICAL 1 mod – part number 85757-1101LF 2 mod – part number 85758-1101LF 4 mod – part number 85759-1101LF 8 mod – part number 85760-1101LF current rating: 1 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) Receptacle, straight, solder-to-board, page 67 MECHANICAL PERFORMANCE insertion force: 0,45 N max. per individual signal contact (mating) withdrawal force: 0,15 N max. per individual signal contact (unmating) recommended hole diameter: 0,65-0,80 mm 1 mod – part numbers HM1S41FRR000H6PLF 2 mod – part numbers HM1S42FRR000H6PLF 4 mod – part numbers HM1S43FRR000H6PLF 8 mod - part numbers HM1S44FRR000H6PLF ENVIRONMENTAL TYPICAL APPLICATIONS Operating temperature range: -55˚C to +125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC PACKAGING standard: trays PROCESSING INFORMATION applicable soldering process: wave, IR, vapor phase REFERENCE DATA Product specification: GS-12-446 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 54 www.fci.com/metral PRODUCT 11.98 1 1 Module 6 B A 31.86 3.5 A D C 2 15.8 11.5 6 SIGNAL CONNECTORS Header, 4 row, signal, right angle, solder to board, wide body 9.35 B 2 4 10 1 2 7.5 23.98 12 6 17 D C B 2 Module A 10.86 47.98 1 24 D C B A 4 Module 95.98 1 48 D C B A 8 Module PCB pattern P1, see chapter PCB layouts PARTNUMBERS HM1L4 x LAP000H6PLF Base Part Number HM1 Type no. of rows no. of pos. Configuration 000 Performance 4 = 4 row L = Signal header right angle, wide body Packaging H6 = Telcordia CO LAP = solder to board 1 = 1 module (4 x 6 pos.) 2 = 2 module (4 x 12 pos.) 3 = 4 module (4 x 24 pos.) 4 = 8 module (4 x 48 pos.) mating length (A) tail length (B) 5,75 mm 2,90 mm 1,6 mm PCB thickness A LF LF = lead free P = trays B Note: For other special patterns or loadings, please check drawings, all other configurations on request only www.fci.com/metral 55 SIGNAL CONNECTORS METRAL® SIGNAL CONNECTORS REVERSED Header, 4 row, signal, right angle, press fit, wide body FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) 4 row and 2 mm pitch permit high signal density ( 200 contacts per 100mm connector length) Modular design guarantees flexibility Eye of the needle press-fit contact TECHNICAL DATA PHYSICAL spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP, colour natural flammability rating: UL 94 V-0 pin material: phosphor bronze performance level: Telcordia CO MATING DATA ELECTRICAL current rating: 1 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) Receptacle, press-fit, page 69 MECHANICAL PERFORMANCE insertion force: 0,45 N max. per individual signal contact (mating) withdrawal force: 0,15 N max. per individual signal contact (unmating) press-fit contact insertion: 55 N max. per pin press-fit pin withdrawal: 15 N min. per pin recommended hole diameter: 0,65-0,80 mm 1 mod – part number 85757-1101LF 2 mod – part number 85758-1101LF 4 mod – part number 85759-1101LF 8 mod – part number 85760-1101LF Receptacle, solder-to-board, page 67 1 mod – part numbers HM1S41FRR000H6PLF 2 mod – part numbers HM1S42FRR000H6PLF 4 mod – part numbers HM1S43FRR000H6PLF 8 mod - part numbers HM1S44FRR000H6PLF ENVIRONMENTAL Operating temperature range: -55˚C to +125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC TYPICAL APPLICATIONS PACKAGING standard: trays PROCESSING INFORMATION press-fit REFERENCE DATA Product specification: GS-12-445 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 56 www.fci.com/metral SIGNAL CONNECTORS Header, 4 row, signal, right angle, press fit, wide body 31.86 PRODUCT 11.98 1 D C B 1 Module A 6 2 A 15.8 6 3.5 9.35 11.5 B 2 10 7.5 4 2 6 23.98 1 12 17 D C B 2 Module A 10.86 1 47.98 24 D C B 4 Module A 95.98 48 1 8 Module D C B A PCB pattern P1, see chapter PCB layouts PARTNUMBERS HM1L4 x LDP000H6PLF Base Part Number HM1 Type no. of rows 4 = 4 row L = Signal header right angle, wide body no. of pos. Configuration 000 Performance LDP = Press fit Packaging H6 = Telcordia CO mating length (A) tail length (B) 5,75 mm 2,90 mm 1,6 mm PCB thickness LF LF = lead free A P = trays B 1 = 1 module (4 x 6 pos.) 2 = 2 module (4 x 12 pos.) 3 = 4 module (4 x 24 pos.) 4 = 8 module (4 x 48 pos.) Note: for other special patterns or loadings, please check drawings, all other configurations on request only www.fci.com/metral 57 SIGNAL CONNECTORS METRAL® SIGNAL CONNECTORS REVERSED Header, 4 row,signal, right angle, pin-in-paste, wide body FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) 4 row and 2 mm pitch permit high signal density ( 200 contacts per 100mm connector length) Modular design guarantees flexibility TECHNICAL DATA PHYSICAL spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP, colour natural flammability rating: UL 94 V-0 pin material: phosphor bronze performance level: Telcordia CO MATING DATA Receptacle, straight, press-fit, page 69 ELECTRICAL 1 mod – part number 85757-101LF current rating: 1 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) Receptacle, straight, solder-to-board, page 67 1 mod – part numbers HM1S41FRR000H6PLF MECHANICAL PERFORMANCE insertion force: 0,45 N max. per individual signal contact (mating) withdrawal force: 0,15 N max. per individual signal contact (unmating) recommended hole diameter: 0,65-0,80 mm ENVIRONMENTAL Operating temperature range: -55˚C to +125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC TYPICAL APPLICATIONS PACKAGING standard: trays PROCESSING INFORMATION Pick&place by vacuum nozzle or mechanical gripper automatic Surface-mount reflow process, resistance for Lead Free reflow temperature REFERENCE DATA Product specification: GS-12-446 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 58 www.fci.com/metral SIGNAL CONNECTORS Header, 4 row,signal, right angle, pin-in-paste, wide body PRODUCT 3.5 11.95 1 6 D C B A 2 15.8 11.5 6 9.35 B 2 2 A 10 6 7.5 4 17 10.86 33 PCB pattern P1, see chapter PCB layouts PARTNUMBERS HM1L4 x LFP000H6PLF Base Part Number HM1 Type no. of rows 4 = 4 row L = Signal header right angle, wide body no. of pos. Configuration 000 Performance LFP = Pin-in-Paste mating length (A) tail length (B) 5,75 mm 2,90 mm 1,6 mm PCB thickness Packaging H6 = Telcordia CO LF LF = lead free A P = trays B 1 = 1 module (4 x 6 pos.) Note: for other special patterns or loadings, please check drawings, all other configurations on request only www.fci.com/metral 59 SIGNAL CONNECTORS METRAL® SIGNAL CONNECTORS REVERSED Header, 4 row, signal, right angle, solder to board, narrow body FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) 4 row and 2 mm pitch permit high signal density ( 200 contacts per 100mm connector length) Modular design guarantees flexibility Narrow body housing TECHNICAL DATA PHYSICAL spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP, colour natural flammability rating: UL 94 V-0 pin material: phosphor bronze performance level: Telcordia CO MATING DATA Receptacle, straight, press-fit, page 69 ELECTRICAL 1 mod – part number 85757-1101LF current rating: 1 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) Receptacle, straight, solder-to-board, page 67 1 mod – part numbers HM1S41FRR000H6PLF MECHANICAL PERFORMANCE insertion force: 0,45 N max. per individual signal contact (mating) withdrawal force: 0,15 N max. per individual signal contact (unmating) recommended hole diameter: 0,65-0,80 mm ENVIRONMENTAL Operating temperature range: -55˚C to +125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC TYPICAL APPLICATIONS PACKAGING standard: tubes PROCESSING INFORMATION applicable soldering process: wave, IR, vapor phase REFERENCE DATA Product specification: GS-12-446 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 60 www.fci.com/metral SIGNAL CONNECTORS Header, 4 row, signal, right angle, solder to board, narrow body PRODUCT 11.95 1 7.5 6 D C B A 2 13.8 11.5 6 9.35 B 2 A 10 3.5 4 2 6 15.9 10.86 30.76 PCB pattern P1, see chapter PCB layouts PARTNUMBERS 85822 - 1yyLF Base Part Number 85822 = 1 module, 4 x 6 pos. Performance Pin Configuration LF 1 = Telcordia CO LF = lead free yy mating length (A) tail length (B) 01 5,00 mm 2,90 mm 05 5,75 mm 2,90 mm 10 5,75 mm 3,70 mm A B Note: for other special patterns or loadings, please check drawings, all other configurations on request only www.fci.com/metral 61 SIGNAL CONNECTORS METRAL® SIGNAL CONNECTORS REVERSED Header, 4 row, signal, right angle, press fit, narrow body FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) 5 row and 2 mm pitch permit high signal density ( 250 contacts per 100mm connector length) Modular design guarantees flexibility Narrow body housing Eye of the needle press-fit contact TECHNICAL DATA PHYSICAL spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP, colour natural flammability rating: UL 94 V-0 pin material: phosphor bronze performance level: Telcordia CO MATING DATA Receptacle, straight, press-fit, page 69 ELECTRICAL current rating: 1 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) 1 mod – part number 85757-1101LF Receptacle, straight, solder-to-board, page 67 MECHANICAL PERFORMANCE insertion force: 0,45 N max. per individual signal contact (mating) withdrawal force: 0,15 N max. per individual signal contact (unmating) 1 mod – part numbers HM1S41FRR000H6PLF press-fit contact insertion: 55 N max. per pin press-fit pin withdrawal: 15 N min. per pin recommended hole diameter: 0,65-0,80 mm ENVIRONMENTAL Operating temperature range: -55˚C to +125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC TYPICAL APPLICATIONS PACKAGING standard: tubes PROCESSING INFORMATION press fit REFERENCE DATA Product specification: GS-12-445 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 62 www.fci.com/metral SIGNAL CONNECTORS Header, 4 row, signal, right angle, press fit, narrow body PRODUCT 7.5 11.95 1 6 D C B 2 A 13.8 6 9.35 11.5 B 2 3.5 2 4 A 10 6 15.9 10.86 30.76 PCB pattern P1, see chapter PCB layouts PARTNUMBERS 58363 - 1yyLF Base Part Number 58363 = 1 module, 4 x 6 pos. Performance Pin Configuration LF 1 = Telcordia CO LF = lead free yy mating length (A) tail length (B) 01 5,00 mm 2,90 mm 05 5,75 mm 2,90 mm A B Note: for other special patterns or loadings, please check drawings, all other configurations on request only www.fci.com/metral 63 SIGNAL CONNECTORS METRAL® SIGNAL CONNECTORS REVERSED Header, 4 row, signal, right angle, pin-in-paste, narrow body FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) 4 row and 2 mm pitch permit high signal density ( 200 contacts per 100mm connector length) Modular design guarantees flexibility Narrow body housing TECHNICAL DATA PHYSICAL spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP, colour natural flammability rating: UL 94 V-0 pin material: phosphor bronze performance level: Telcordia CO MATING DATA Receptacle, straight, press-fit, page 69 ELECTRICAL 1 mod – part number 85757-1101LF current rating: 1 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) Receptacle, straight, solder-to-board, page 67 1 mod – part numbers HM1S41FRR000H6PLF MECHANICAL PERFORMANCE insertion force: 0,45 N max. per individual signal contact (mating) withdrawal force: 0,15 N max. per individual signal contact (unmating) recommended hole diameter: 0,65-0,80 mm ENVIRONMENTAL TYPICAL APPLICATIONS Operating temperature range: -55˚C to +125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC PACKAGING standard: tape&reel PROCESSING INFORMATION Pick&place by vacuum nozzle or mechanical gripper automatic Surface-mount reflow process, resistance for Lead Free reflow temperature REFERENCE DATA Product specification: GS-12-446 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 64 www.fci.com/metral SIGNAL CONNECTORS Header, 4 row, signal, right angle, pin-in-paste, narrow body PRODUCT 11.95 1 6 D C B 2 A 13.8 6 9.35 11.5 B 2 A 10 3.5 2 4 7.5 6 12 15.9 10.86 31.9 PCB pattern P1, see chapter PCB layouts PARTNUMBERS 58361 - 101LF Base Part Number 58361 = 1 module, 4 x 6 pos. Performance Pin Configuration LF 1 = Telcordia CO LF = lead free A yy mating length (A) tail length (B) 01 5,75 mm 2,90 mm B Note: for other special patterns or loadings, please check drawings, all other configurations on request only www.fci.com/metral 65 SIGNAL CONNECTORS METRAL® SIGNAL CONNECTORS REVERSED Receptacle, 4 row, signal, straight, solder to board FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) 4 row and 2 mm pitch permit high signal density (200 contacts per 100mm connector length) Modular design guarantees flexibility Parallel board applications Tuning fork contact TECHNICAL DATA MATING DATA PHYSICAL Header, right angle, press-fit, page 57 spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP, colour natural flammability rating: UL 94 V-0 contact material: phosphor bronze performance level: Telcordia CO 1 module-part number HM1L41LDP000H6PLF 2 module-part number HM1L42LDP000H6PLF 4 module-part number HM1L43LDP000H6PLF 8 module-part number HM1L44LDP000H6PLF Header, right angle, solder-to-board, page 55 ELECTRICAL 1 module-part number HM1L41LAP000H6PLF 2 module-part number HM1L42LAP000H6PLF 4 module-part number HM1L43LAP000H6PLF 8 module-part number HM1L44LAP000H6PLF current rating: 1 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) Header, right angle, Pin-in-Paste, page 59 MECHANICAL PERFORMANCE insertion force: 0,45 N max. per individual signal contact (mating) withdrawal force: 0,15 N max. per individual signal contact (unmating) recommended hole diameter: 0,65-0,80 mm 1 module-part number HM1L41LFP000H6PLF ENVIRONMENTAL Operating temperature range: -55˚C to +125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC TYPICAL APPLICATIONS PACKAGING standard: trays PROCESSING INFORMATION Applicable process: wave, IR, vapor phase REFERENCE DATA Product specification: GS-12-448 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 66 www.fci.com/metral SIGNAL CONNECTORS Receptacle, 4 row, signal, straight, solder to board PRODUCT 11.98 2.05 1 Module 6 2 8.8 B 11.3 14.3 23.98 2 Module 10 2 47.98 4 Module 95.98 8 Module PCB pattern P5, see chapter PCB layouts PARTNUMBERS HM1S4 x FRR000H6PLF Base Part Number HM1 Type S = signal receptacle straight no. of rows 4 = 4 row no. of pos. Configuration 000 FRR = solder to board Performance Packaging H6 = Telcordia CO LF LF = lead free tail length (B) 3,30 mm B P = trays 1 = 1 module (4 x 6 pos.) 2 = 2 module (4 x 12 pos.) 3 = 4 module (4 x 24 pos.) 4 = 8 module (4 x 48 pos.) Note: for other special patterns or loadings, please check drawings, all other configurations on request only www.fci.com/metral 67 SIGNAL CONNECTORS METRAL® SIGNAL CONNECTORS REVERSED Receptacle, 4 row, signal, straight, press fit FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) 4 row and 2 mm pitch permit high signal density (200 contacts per 100mm connector length) Modular design guarantees flexibility Parallel board applications Tuning fork contact Baby H-shape press-fit contact Flat rock design; can pressed on PCB with flat press block MATING DATA Header, right angle, press-fit, page 57 1 module-part number HM1L41LDP000H6PLF 2 module-part number HM1L42LDP000H6PLF 4 module-part number HM1L43LDP000H6PLF 8 module-part number HM1L44LDP000H6PLF TECHNICAL DATA PHYSICAL spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP, colour natural flammability rating: UL 94 V-0 contact material: phosphor bronze performance level: Telcordia CO Header, right angle, solder-to-board, page 55 ELECTRICAL current rating: 1 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) Header, right angle, Pin-in-Paste, page 59 1 module-part number HM1L41LAP000H6PLF 2 module-part number HM1L42LAP000H6PLF 4 module-part number HM1L43LAP000H6PLF 8 module-part number HM1L44LAP000H6PLF 1 module-part number HM1L41LFP000H6PLF MECHANICAL PERFORMANCE insertion force: 0,45 N max. per individual signal contact (mating) withdrawal force: 0,15 N max. per individual signal contact (unmating) TYPICAL APPLICATIONS press-fit contact insertion: 100 N max. per pin press-fit pin withdrawal: 20 N min. per pin recommended hole diameter: 0,65-0,80 mm ENVIRONMENTAL Operating temperature range: -55˚C to +125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC PACKAGING standard: tubes PROCESSING INFORMATION press fit REFERENCE DATA Product specification: GS-12-447 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 68 www.fci.com/metral SIGNAL CONNECTORS Receptacle, 4 row, signal, straight, press fit PRODUCT 11.95 6 1.3 D 1 Module 14.3 0.5 1 C B B 2 11.3 A 2 6 23.95 12 1 D 2 Module C B 10 A 2 47.95 24 1 D C 4 Module B A 95.95 48 1 D C 8 Module B A PCB pattern P6, see chapter PCB layouts PARTNUMBERS 8575x - 1y01LF Base Part Number 85757 = 1 module (4 x 6 pos.) 85758 = 2 module (4 x 12 pos.) 85759 = 4 module (4 x 24 pos.) 85760 = 8 module (4 x 48 pos.) Performance Tail length 1 = Telcordia CO Pin Configuration LF 01 = fully loaded y tail length (B) 1 4,3 mm 2 13,6 mm 3 17,1 mm LF = lead free B Note: blue marked in tail length is the preferred recommended standard for other special patterns or loadings, please check drawings, all other configurations on request only www.fci.com/metral 69 SIGNAL CONNECTORS METRAL® SIGNAL CONNECTORS REVERSED Header, 5 row, signal, right angle, solder to board, wide body FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) 5 row and 2 mm pitch permit high signal density ( 250 contacts per 100mm connector length) Modular design guarantees flexibility TECHNICAL DATA PHYSICAL spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP, colour natural flammability rating: UL 94 V-0 pin material: phosphor bronze performance level: Telcordia CO MATING DATA Receptacle, straight, press-fit, page 79 ELECTRICAL 1 mod – part number 85761-1101LF 2 mod – on request only 4 mod – part number 85763-1101LF 8 mod – on request only current rating: 1 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) Receptacle, straight, solder-to-board, page 77 MECHANICAL PERFORMANCE insertion force: 0,45 N max. per individual signal contact (mating) withdrawal force: 0,15 N max. per individual signal contact (unmating) recommended hole diameter: 0,65-0,80 mm 1 mod – part numbers HM1S51FRR000H6PLF 2 mod – part numbers HM1S52FRR000H6PLF 4 mod – part numbers HM1S53FRR000H6PLF 8 mod - part numbers HM1S54FRR000H6PLF ENVIRONMENTAL Operating temperature range: -55˚C to +125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC TYPICAL APPLICATIONS PACKAGING standard: trays PROCESSING INFORMATION applicable soldering process: wave, IR, vapor phase REFERENCE DATA Product specification: GS-12-446 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 70 www.fci.com/metral PRODUCT 11.98 1 1 Module 17 A 2 6 E D C B A 17.8 8 11.35 13.5 2 2 Module 23.98 4 35 12 B 2 3.5 7.5 10 1 SIGNAL CONNECTORS Header, 5 row, signal, right angle, solder to board, wide body E D C B A 8 14 47.98 1 4 Module 24 E D C B A 95.98 1 48 E D C B A 8 Module PCB pattern P2, see chapter PCB layouts PARTNUMBERS HM1L5 x LAP000H6PLF Base Part Number HM1 Type no. of rows 5 = 5 row L = Signal header right angle, wide body 1 = 1 module (5 x 6 2 = 2 module (5 x 12 3 = 4 module (5 x 24 4 = 8 module (5 x 48 pos.) pos.) pos.) pos.) no. of pos. Configuration 000 Performance LAP = solder to board mating length (A) tail length (B) 5,75 mm 2,90 mm 1,6 mm PCB thickness Packaging H6 = Telcordia CO LF LF = lead free A P = trays B Note: for other special patterns or loadings, please check drawings, all other configurations on request only www.fci.com/metral 71 SIGNAL CONNECTORS METRAL® SIGNAL CONNECTORS REVERSED Header, 5 row, signal, right angle, press fit, wide body FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) 5 row and 2 mm pitch permit high signal density ( 250 contacts per 100mm connector length) Modular design guarantees flexibility Eye of the needle press-fit contact TECHNICAL DATA PHYSICAL spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP, colour natural flammability rating: UL 94 V-0 pin material: phosphor bronze performance level: Telcordia CO ELECTRICAL MATING DATA current rating: 1 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) Receptacle, straight, press-fit, page 79 1 mod – part number 85761-1101LF 2 mod – on request only 4 mod – part number 85763-1101LF 8 mod – on request only MECHANICAL PERFORMANCE insertion force: 0,45 N max. per individual signal contact (mating) withdrawal force: 0,15 N max. per individual signal contact (unmating) Receptacle, straight, solder-to-board, page 77 1 mod – part numbers HM1S51FRR000H6PLF 2 mod – part numbers HM1S52FRR000H6PLF 4 mod – part numbers HM1S53FRR000H6PLF 8 mod - part numbers HM1S54FRR000H6PLF press-fit contact insertion: 55 N max. per pin press-fit pin withdrawal: 15 N min. per pin recommended hole diameter: 0,65-0,80 mm ENVIRONMENTAL Operating temperature range: -55˚C to +125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC TYPICAL APPLICATIONS PACKAGING standard: trays PROCESSING INFORMATION press fit REFERENCE DATA Product specification: GS-12-445 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 72 www.fci.com/metral PRODUCT 17 11.98 1 A 2 6 E D C B A 1 Module 8 2 17.8 11.35 13.5 2 10 B 3.5 7.5 23.98 1 2 Module SIGNAL CONNECTORS Header, 5 row, signal, right angle, press fit, wide body 4 8 12 35 E D C B A 14 47.98 24 1 E D C B A 4 Module 95.98 1 48 E D C B A 8 Module PCB pattern P2, see chapter PCB layouts PARTNUMBERS HM1L5 x LDP000H6PLF Base Part Number HM1 Type no. of rows 5 = 5 row L = Signal header right angle, wide body no. of pos. Configuration 000 Packaging H6 = Telcordia CO LDP = press fit mating length (A) tail length (B) 5,75 mm 2,90 mm 1,6 mm PCB thickness 1 = 1 module (5 x 6 2 = 2 module (5 x 12 3 = 4 module (5 x 24 4 = 8 module (5 x 48 Performance LF LF = lead free A P = trays B pos.) pos.) pos.) pos.) Note: for other special patterns or loadings, please check drawings, all other configurations on request only www.fci.com/metral 73 SIGNAL CONNECTORS METRAL® SIGNAL CONNECTORS REVERSED Header, 5 row, signal, right angle, pin-in-paste, wide body FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) 5 row and 2 mm pitch permit high signal density ( 250 contacts per 100mm connector length) Modular design guarantees flexibility TECHNICAL DATA PHYSICAL spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP, colour natural flammability rating: UL 94 V-0 pin material: phosphor bronze performance level: Telcordia CO MATING DATA ELECTRICAL Receptacle, straight, press-fit, page 79 current rating: 1 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) 1 mod – part number 85761-1101LF Receptacle, straight, solder-to-board, page 77 MECHANICAL PERFORMANCE insertion force: 0,45 N max. per individual signal contact (mating) withdrawal force: 0,15 N max. per individual signal contact (unmating) recommended hole diameter: 0,65-0,80 mm 1 mod – part numbers HM1S51FRR000H6PLF ENVIRONMENTAL Operating temperature range: -55˚C to +125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC TYPICAL APPLICATIONS PACKAGING standard: trays PROCESSING INFORMATION Pick&place by vacuum nozzle or mechanical gripper automatic Surface-mount reflow process, resistance for Lead Free reflow temperature REFERENCE DATA Product specification: GS-12-446 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 74 www.fci.com/metral SIGNAL CONNECTORS Header, 5 row, signal, right angle, pin-in-paste, wide body PRODUCT 3.5 11.95 1 6 E D 17.8 8 C B A 11.35 13.5 2 2 2 A 10 B 4 7.5 8 14 35.1 PCB pattern P2, see chapter PCB layouts PARTNUMBERS HM1L5 x LFP000H6PLF Base Part Number HM1 Type no. of rows 5 = 5 row L = Signal header rright angle, wide body no. of pos. Configuration 000 Performance LFP = Pin-in-Paste mating length (A) tail length (B) 5,75 mm 2,90 mm 1,6 mm PCB thickness Packaging H6 = Telcordia CO LF LF = lead free A P = trays B 1 = 1 module (5 x 6 pos.) Note: for other special patterns or loadings, please check drawings, all other configurations on request only www.fci.com/metral 75 SIGNAL CONNECTORS METRAL® SIGNAL CONNECTORS REVERSED Receptacle, 5 row, signal, straight, solder to board FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) 5 row and 2 mm pitch permit high signal density (250 contacts per 100mm connector length) Modular design guarantees flexibility Parallel board applications Tuning fork contact TECHNICAL DATA MATING DATA PHYSICAL Header, right angle, press-fit, page 73 spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP, colour natural flammability rating: UL 94 V-0 contact material: phosphor bronze performance level: Telcordia CO 1 module-part number HM1L51LDP000H6PLF 2 module-part number HM1L52LDP000H6PLF 4 module-part number HM1L53LDP000H6PLF 8 module-part number HM1L54LDP000H6PLF Header, right angle, solder-to-board, page 71 ELECTRICAL 1 module-part number HM1L51LAP000H6PLF 2 module-part number HM1L52LAP000H6PLF 4 module-part number HM1L53LAP000H6PLF 8 module-part number HM1L54LAP000H6PLF current rating: 1 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) Header, right angle, Pin-in-Paste, page 75 MECHANICAL PERFORMANCE 1 module-part number HM1L51LFP000H6PLF insertion force: 0,45 N max. per individual signal contact (mating) withdrawal force: 0,15 N max. per individual signal contact (unmating) recommended hole diameter: 0,65-0,80 mm ENVIRONMENTAL Operating temperature range: -55˚C to +125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC TYPICAL APPLICATIONS PACKAGING standard: trays PROCESSING INFORMATION Applicable process: wave, IR, vapor phase REFERENCE DATA Product specification: GS-12-448 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 76 www.fci.com/metral PRODUCT SIGNAL CONNECTORS Receptacle, 5 row, signal, straight, solder to board 0.55 11.95 8 1 Module 2 13.3 0.8 2.45 2.5 14.3 23.95 2 Module 10 2 B 47.95 4 Module 95.95 8 Module PCB pattern P7, see chapter PCB layouts PARTNUMBERS HM1S5 x FRR000H6PLF Base Part Number HM1 Type S = signal receptacle straight no. of rows 5 = 5 row 1 = 1 module (5 x 6 pos.) 2 = 2 module (5 x 12 pos.) 3 = 4 module (5 x 24 pos.) 4 = 8 module (5 x 48 pos.) no. of pos. Configuration 000 FRR = solder to board Performance Packaging H6 = Telcordia CO LF LF = lead free tail length (B) 3,30 mm B P = trays Note: for other special patterns or loadings, please check drawings, all other configurations on request only www.fci.com/metral 77 SIGNAL CONNECTORS METRAL® SIGNAL CONNECTORS REVERSED Receptacle, 5 row, signal, straight, press fit FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) 5 row and 2 mm pitch permit high signal density (250 contacts per 100mm connector length) Modular design guarantees flexibility Parallel board applications Tuning fork contact baby H-shape press-fit contact Flat rock design; can pressed on PCB with flat press block MATING DATA Header, right angle, press-fit, page 73 1 module-part number HM1L51LDP000H6PLF 2 module-part number HM1L52LDP000H6PLF 4 module-part number HM1L53LDP000H6PLF 8 module-part number HM1L54LDP000H6PLF TECHNICAL DATA PHYSICAL spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP, colour natural flammability rating: UL 94 V-0 contact material: phosphor bronze performance level: Telcordia CO Header, right angle, solder-to-board, page 71 1 module-part number HM1L51LAP000H6PLF 2 module-part number HM1L52LAP000H6PLF 4 module-part number HM1L53LAP000H6PLF 8 module-part number HM1L54LAP000H6PLF ELECTRICAL current rating: 1 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) Header, right angle, Pin-in-Paste, page 75 1 module-part number HM1L51LFP000H6PLF MECHANICAL PERFORMANCE insertion force: 0,45 N max. per individual signal contact (mating) withdrawal force: 0,15 N max. per individual signal contact (unmating) press-fit contact insertion: 100 N max. per pin press-fit pin withdrawal: 20 N min. per pin recommended hole diameter: 0,65-0,80 mm TYPICAL APPLICATIONS ENVIRONMENTAL Operating temperature range: -55˚C to +125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC PACKAGING standard: tubes PROCESSING INFORMATION press fit REFERENCE DATA Product specification: GS-12-447 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 78 www.fci.com/metral PRODUCT B 11.95 6 5 2 14.3 0.5 SIGNAL CONNECTORS Receptacle, 5 row, signal, straight, press fitt 1.3 1 E 1 Module D 8 C 13.3 2 B A 23.95 12 1 E D 2 Module 10 C B 2 A 24 47.95 1 E D 4 Module C B A 95.95 48 1 E 8 Module D C B A PCB pattern P7, see chapter PCB layouts PARTNUMBERS 8576x - 1y01LF Base Part Number 85761 on request only 85763 on request only = 1 module (5 x 6 pos.) = 2 module (5 x 12 pos.) = 4 module (5 x 24 pos.) = 8 module (5 x 48 pos.) Performance Tail length 1 = Telcordia CO y Pin Configuration LF 01 = fully loaded LF = lead free tail length (B) 1 4,3 mm 2 13,6 mm 3 17,1 mm B Note: blue marked in tail length is the preferred recommended standard for other special patterns or loadings, please check drawings, all other configurations on request only www.fci.com/metral 79 80 www.fci.com/metral SHROUDS METRAL® SHROUDS METRAL® SHROUDS Shroud, 4 row, wide body Shroud, 5 row, wide body Shroud, 8 row, wide body www.fci.com/metral 81 METRAL® SHROUDS Shroud, 4 row, wide body FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) SHROUDS Different stand-off versions for rear-plug-up Easy direct mounting of the shroud on the pins without need of mounting shroud to PCB. Retention force from the shroud on the press-connector is on the non-contact side of the pin. Wide lead-in for easy mating of female connectors Designed-in polarization. Optional coding. MATING DATA TECHNICAL DATA 4 row Header, straight, press-fit, page 27 PHYSICAL 1 mod 70232-116LF 2 mod 70233-116LF 4 mod 70234-116LF 8 mod 70235-116LF housing: glass-filled LCP, colour natural flammability rating: UL 94 V-0 ELECTRICAL withstanding voltage: 1000 V rms (sea level) MECHANICAL PERFORMANCE TYPICAL APPLICATIONS insertion force: 0,45 N max. per individual signal contact (mating) withdrawal force: 0,15 N max. per individual signal contact (unmating) ENVIRONMENTAL press-fit header shroud press-fit header shroud Operating temperature range: -55˚C to +105˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC PROCESSING INFORMATION used over pins previously staked into the pc board REFERENCE DATA product specification: GS-12-180 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223. 82 www.fci.com/metral Shroud, 4 row, wide body PRODUCT 11.98 1 3.5 6 2 11.5 D C B 15.8 SHROUDS 1 Module 70203-111LF 6 A 2.3 2 10 17 23.98 1 2 Module 70203-112LF 12 D C B 3,50 Stand off Height Rear Plug-up Mating Length A press-fit header 47.98 1 4 Module 70203-113LF shroud 24 D C B A PCB Thickness 13,60 press-fit header tail length 95.98 1 8 Module 70203-114LF 48 D C B A PARTNUMBERS 70203 - yyyLF Base Part Number 70203 = 4 row shroud, wide body Note: Box packaging no.of positions yyy no. of positions 111 4x6 112 4 x 12 113 4 x 24 114 4 x 48 www.fci.com/metral LF LF = lead free 83 METRAL® SHROUDS Shroud, 5 row, wide body FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) SHROUDS Different stand-off versions for rear-plug-up Easy direct mounting of the shroud on the pins without need of mounting shroud to PCB. Retention force from the shroud on the press-connector is on the non-contact side of the pin. Wide lead-in for easy mating of female connectors Designed-in polarization. Optional coding. MATING DATA TECHNICAL DATA 4 row Header, straight, press-fit, page 41 PHYSICAL 1 mod 89006-116LF 2 mod 89007-116LF 4 mod 89008-116LF 8 mod 89009-116LF housing: glass-filled LCP, colour natural flammability rating: UL 94 V-0 ELECTRICAL withstanding voltage: 1000 V rms (sea level) MECHANICAL PERFORMANCE TYPICAL APPLICATIONS insertion force: 0,45 N max. per individual signal contact (mating) withdrawal force: 0,15 N max. per individual signal contact (unmating) ENVIRONMENTAL press-fit header shroud press-fit header shroud Operating temperature range: -55˚C to +105˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC PROCESSING INFORMATION used over pins previously staked into the pc board REFERENCE DATA product specification: GS-12-180 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 84 www.fci.com/metral Shroud, 5 row, wide body PRODUCT 11.98 3.5 6 E D C 1 Module 89055-111LF 17.8 B A 13.5 2 SHROUDS 1 8 2.3 2 10 17 23.98 1 2 Module 89055-112LF 12 E D 3,50 Stand off Height C B A Rear Plug-up Mating Length press-fit header 47.98 1 E D C B 4 Module 89055-113LF shroud 24 PCB Thickness 13,60 press-fit header tail length A 95.98 1 48 E D 8 Module 89055-114LF C B A PARTNUMBERS 89055 - yyyLF Base Part Number 89055 = 5 row shroud, wide body Note: Box packaging no.of positions yyy no. of positions 111 5x6 112 5 x 12 113 5 x 24 114 5 x 48 www.fci.com/metral LF LF = lead free 85 METRAL® SHROUDS Shroud, 8 row, wide body FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) SHROUDS 8 row and 2 mm pitch permit high signal density ( 800 contacts per 100mm connector length) Stackable with other METRAL® function modules (power, I/O) 2 modules shroud, 8 rows by 6 position TECHNICAL DATA PHYSICAL spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP, colour natural flammability rating: UL 94 V-0 pin material: phosphor bronze performance level: Telcordia CO MATING DATA Header, straight, press-fit, page 49 ELECTRICAL part number 74771-102011LF (used opposite board side) current rating: 1 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) Receptacle, straight, press-fit, page 51 part number 74770-102LF MECHANICAL PERFORMANCE insertion force: 0,45 N max. per individual signal contact (mating) withdrawal force: 0,15 N max. per individual signal contact (unmating) ENVIRONMENTAL TYPICAL APPLICATIONS Operating temperature range: -55˚C to +125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC PACKAGING press-fit header shroud press-fit header shroud standard: tubes PROCESSING INFORMATION used over pins previously staked into the pc board REFERENCE DATA Product specification: GS-12-134 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 86 www.fci.com/metral Shroud, 8 row, wide body SHROUDS PRODUCT 16.70 GND A B C D E F G 6.45 2 16 H 17 2 22 23.88 PARTNUMBERS 98173 - 102LF Base Part Number 98173 = 8 row shroud, wide body no.of positions yyy no. of positions 102 8 x 12 LF LF = lead free Note: Box packaging www.fci.com/metral 87 88 www.fci.com/metral POWER CONNECTORS METRAL® POWER CONNECTORS STANDARD METRAL® POWER CONNECTORS STANDARD Header, 4 row, straight, wide body Header, 4 row, straight, narrow body Receptacle, 4 row, right angle Header, 5 row, straight, wide body Receptacle, 5 row, right angle www.fci.com/metral 89 METRAL® POWER CONNECTORS STANDARD Header, 4 row power, straight, solder to board, wide body FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) 4 x 2 power blades contacts POWER CONNECTORS 12 mm power modules are form- and fit interchangeable with signal modules on same footprint TECHNICAL DATA PHYSICAL spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP (30% glass), colour natural flammability rating: UL 94 V-0 contact material: phosphor bronze performance level: Telcordia CO MATING DATA Receptacle, right angle, press-fit, page 101 part number 88949-102LF ELECTRICAL current rating: 3 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) Receptacle, right angle, solder-to-board, page 99 part number 89039-101LF Receptacle, right angle, Pin-in-Paste, page 103 MECHANICAL PERFORMANCE insertion force: 1,50 N max. per individual power contact (mating) withdrawal force: 0,30 N max. per individual power contact (unmating) recommended hole diameter: 0,65-0,80 mm part number 72651-101LF ENVIRONMENTAL Operating temperature -55˚C to + 125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC TYPICAL APPLICATIONS PACKAGING Standard Tubes PROCESSING INFORMATION Applicable process: wave, IR, vapor phase REFERENCE DATA Product Specification GS-12-180 Application Specification BUS-20-075 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 90 www.fci.com/metral Header, 4 row power, straight, solder to board, wide body PRODUCT 17 6 3.45 2 POS 1 D POWER CONNECTORS 2 2.3 1.4 C 6 B 11.5 15.8 0.52 A 2 A B 11.93 PCB pattern P5, see chapter PCB layouts PARTNUMBERS 88960 - 101LF Base Part Number 88960 = 1 module, 4 x 6 pos. Performance Pin Configuration LF 1 = Telcordia CO LF = lead free yy mating length (A) tail length (B) 01 6,50 mm 4,25 mm A B Note: for other special patterns or loadings, please check drawings, all other configurations on request only www.fci.com/metral 91 METRAL® POWER CONNECTORS STANDARD Header, 4 row power, straight, press-fit, wide body FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) 4 x 2 power blades contacts 12 mm power modules are form- and fit interchangeable with signal modules on same footprint POWER CONNECTORS Eye the needle press-fit contac TECHNICAL DATA PHYSICAL spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP (30% glass), colour natural flammability rating: UL 94 V-0 contact material: phosphor bronze performance level: Telcordia CO MATING DATA Receptacle, right angle, press-fit, page 101 ELECTRICAL part number 88949-102LF current rating: 3 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) Receptacle, right angle, solder-to-board, page 99 part number 89039-101LF MECHANICAL PERFORMANCE Receptacle, right angle, Pin-in-Paste, page 103 insertion force: 1,50 N max. per individual power contact (mating) withdrawal force: 0,30 N max. per individual power contact (unmating) part number 72651-101LF press-fit contact insertion: 65 N max. per pin press-fit pin withdrawal: 15 N min. per pin recommended hole diameter: 0,65-0,80 mm ENVIRONMENTAL TYPICAL APPLICATIONS Operating temperature -55˚C to + 125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC PACKAGING Standard Tubes PROCESSING INFORMATION Applicable process: press fit REFERENCE DATA Product Specification GS-12-180 Application Specification BUS-20-075 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 92 www.fci.com/metral Header, 4 row power, straight, press-fit, wide body PRODUCT 17.0 6.0 POS 1 3.45 2 2.3 D 2.0 C 1.4 B 11.5 A 15.8 POWER CONNECTORS 6.0 0.52 2.0 A B 11.93 PCB pattern P6, see chapter PCB layouts PARTNUMBERS 70236 - 101LF Base Part Number 70236 = 1 module, 4 x 6 pos. Performance Pin Configuration LF 1 = Telcordia CO LF = lead free yy mating length (A) tail length (B) 01 6,50 mm 4,25 mm A B Note: for other special patterns or loadings, please check drawings, all other configurations on request only www.fci.com/metral 93 METRAL® POWER CONNECTORS STANDARD Header, 4 row, power, straight, solder to board, narrow body FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) 4 row 2 power blades contacts Narrow body housing POWER CONNECTORS 12 mm power modules are form- and fit interchangeable with signal modules on same footprint TECHNICAL DATA PHYSICAL spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP (30% glass), colour natural flammability rating: UL 94 V-0 contact material: phosphor bronze performance level: Telcordia CO MATING DATA Receptacle, right angle, press-fit, page 101 part number 88949-102LF ELECTRICAL Receptacle, right angle, solder-to-board, page 99 current rating: 3 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) part number 89039-101LF Receptacle, right angle, Pin-in-Paste, page 103 MECHANICAL PERFORMANCE part number 72651-101LF insertion force: 1,50 N max. per individual power contact (mating) withdrawal force: 0,30 N max. per individual power contact (unmating) recommended hole diameter: 0,65-0,80 mm ENVIRONMENTAL Operating temperature -55˚C to + 125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC TYPICAL APPLICATIONS PACKAGING Standard Tubes PROCESSING INFORMATION Applicable process: wave, IR, vapor phase REFERENCE DATA Product Specification GS-12-180 Application Specification BUS-20-075 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 94 www.fci.com/metral Header, 4 row, power, straight, solder to board, narrow body PRODUCT 6 POS 1 15.9 3.45 2 1.4 D C 6 B 11.5 A POWER CONNECTORS 2 1.15 13.8 A 1.15 B 11.95 PCB pattern P3, see chapter PCB layouts PARTNUMBERS 70278 - 101LF Base Part