8.0 Amp FAST RECOVERY PLASTIC RECTIFIERS Data Sheet Mechanical Dimensions FR80 . . . 810 Series Description JEDEC TO-220AC 1 2 Case 1 2 Case Features n FAST SWITCHING FOR HIGH EFFICIENCY n 8.0 AMP OPERATION @ TA = 55°C, WITH NO THERMAL RUNAWAY n HIGH SURGE CAPABILITY n MEETS UL SPECIFICATION 94V-0 Units FR80 . . . 810 Series FR80 FR81 FR82 FR84 FR86 FR88 FR810 Peak Repetitive Reverse Voltage...VRRM 50 100 200 400 600 800 1000 Volts RMS Reverse Voltage...VR(rms) 35 70 140 280 420 560 700 Volts DC Blocking Voltage...VDC 50 100 200 400 600 800 1000 Volts Maximum Ratings Average Forward Rectified Current...IF(av) TC = 100°C ............................................. 8.0 ............................................... Amps Non-Repetitive Peak Forward Surge Current...IFSM @ Rated Current & Temp ............................................. 150 ............................................... Amps Operating & Storage Temperature Range...TJ, TSTRG ........................................ -50 to 150 ......................................... °C ............................................. 1.3 ............................................... Volts Electrical Characteristics Maximum Forward Voltage @ 8.0A...VF Maximum DC Reverse Current...IR @ Rated DC Blocking Voltage @ @ Typical Junction Capacitance...CJ (Note 1) Maximum Reverse Recovery Time...tRR Page 4-18 25°C 100°C ............................................. 1 0 ............................................... µAmps ............................................. 250 ............................................... µAmps ............................................. 5 5 ............................................... 150 150 150 150 250 500 500 pF ns Peak Forward Surge Current (A) Forward Current Derating Curve Average Forward Current (A) 10 8 TC 6 4 2 0 TA 25 50 75 100 125 150 175 Ambient Temperature (°° C) FR80 . . . 810 Series 8.0 Amp FAST RECOVERY PLASTIC RECTIFIERS Data Sheet Non-Repetitive Peak Forward Surge Current 120 80 40 1 10 100 Number of Cycles @ 60 HZ Typical Reverse Characteristics Typical Junction Capacitance 100 10 Junction Capacitance (pF) Reverse Current (µ µA) TC= 100°C TC= 75°C 1.0 TC = 25°C .1 120 80 40 .1 Forward Current (A) Reverse Recovery Characteristics Non-Inductive 10 .1 (+) (-) 50Ω Ω 25 VDC Ω D.U.T 10Ω 1Ω NonInductive (-) Pulse Generator Note 2 Oscilliscope (+) Note 1 Notes: 1 .6 1.1 1.7 2.3 2.6 Forward Voltage (V) 1000 Reverse Voltage (V) Typical Instantaneous Forward Characteristics 1000 100 100 10 1 20 40 60 80 100 120 140 160 Percent of Rated Peak Voltage 1 . Rise Time = 7 ns Max. Impedance = 1 megohm, 22 pF 2 . Rise Time = 10 ns Max. Source Impedance = 50 Ohms NOTES: 1. Measured @ 1 MHz and applied reverse voltage of 4.0V. 2. Thermal Resistance Junction to Case, Jedec Method. +.5A tRR Ratings at 25 Deg. C ambient temperature unless otherwise specified. 0A -.25A -1.0A 1 cm Time Base Set @ 50/100ns/cm Single Phase Half Wave, 60 Hz Resistive or Inductive Load. For Capacitive Load, Derate Current by 20%. Page 4-19