UF10C05~60

10 Amp SUPER FAST RECOVERY
POWER RECTIFIERS
Data Sheet
Mechanical Dimensions
UF10C05.....10C60
Description
JEDEC
TO-220AB
1
2
CASE
3
Double Suffix ‘‘D’’
1
3
1
2
CASE 3
Common Anode Suffix ‘‘A’’
2
CASE
Common Cathode Suffix ‘‘C’’
Features
n LOW FORWARD VOLTAGE
n SUPER FAST RECOVERY TIME
n HIGH SURGE CAPABILITY
n MEETS UL SPECIFICATION 94V-0
UF10C05....UF10C60
Units
Maximum Ratings
Peak Repetitive Reverse Voltage...VRRM
50 100 200 300 400 500 600
Volts
Working Peak Reverse Voltage...VRWM
05 100 200 300 400 500 600
Volts
DC Blocking Voltage...VDC
05 100 200 300 400 500 600
Volts
RMS Reverse Voltage...VR(rms)
35
Volts
70 140 210 280 350 420
Average Forward Rectified Current...IF(av) (Per Leg)
TC = 100°C @ Rated VDC ( Total)
5
10
Amps
Amps
Repetitive Peak Forward Surge Current...IFM
@ Rated VDC, Square Wave, 20 kHz, TC = 100°C
10
Amps
100
Amps
-50 to 150
°C
Non-Repetitive Peak Forward Surge Current...IFSM
@ Rated Load Cond., ½ Wave, Single Phase, 60Hz
Operating & Storage Temperature Range...TJ, TSTRG
Electrical Characteristics, Per Diode Leg
Maximum Forward Voltage...VF
@ IF = 5 Amps, PW = 300µs
Maximum DC Reverse Current...IR
@ Rated DC Blocking Voltage
TC = 25°C
---- 0.95 ---- ---1.3---- ---1.5 ----
Volts
TC =125°C
TC = 25°C
500
10
µAmps
µAmps
------35----- --------- 50 -----------
ns
Maximum Reverse Recovery Time...tRR
IF = 0.5 Amp, IR= 1A, Irr = 0.25A
10 Amp SUPER FAST RECOVERY
POWER RECTIFIERS
Data Sheet
Peak Forward Surge Current (A)
Average Forward Current (A)
Forward Current Derating Curve
12
10
8
6
4
2
0
2 5 5 0 7 5 100 125 150 175
Ambient Temperature (°° C)
10
1
10
UF10C60
UF10C 40
UF10C.20
UF10C 40
UF10C060
Reverse Voltage (V)
Reverse Voltage (V)
Forward Current (A)
Typical Instantaneous
Forward Characteristics
Reverse Recovery
Characteristics
Non-Inductive
UF10C.20
(+)
(-)
50Ω
Ω
25 VDC
Ω
D.U.T 10Ω
1Ω
NonInductive
(-)
Pulse
Generator
Note 2
Oscilliscope (+)
Note 1
Notes:
UF10C40..60
Forward Voltage (V)
100
Typical Junction Capacitance
Junction Capacitance (pF)
Reverse Current (µ
µA)
200
100
Number of Cycles @ 60 Hz
Typical Reverse Characteristics
UF10C.20
Non-Repetitive
Peak Forward Surge Current
1 . Rise Time = 7 ns Max.
Impedance = 1 megohm, 22 pF
2 . Rise Time = 10 ns Max.
Source Impedance = 50 Ohms
+.5A
tRR
Ratings at
25 Deg. C ambient
temperature
unless otherwise
specified.
0A
-.25A
-1.0A
1 cm
Time Base Set @ 50/100ns/cm
Single Phase Half
Wave, 60 Hz
Resistive or
Inductive Load.
For Capacitive
Load, Derate
Current by 20%.