Data Sheet FRS10 . . . 110 Series Description 1.0 Amp FAST RECOVERY RECTIFIERS Mechanical Dimensions DO-214AC (SMA) Features n FAST SWITCHING FOR HIGH EFFICIENCY n 1.0 AMP OPERATION @ TA = 55°C, WITH NO THERMAL RUNAWAY n HIGH SURGE CAPABILITY n MEETS UL SPECIFICATION 94V-0 Units FRS10 . . . 110 Series FRS10 FRS11 FRS13 FRS14 Maximum Ratings Peak Repetitive Reverse Voltage...VRRM 50 RMS Reverse Voltage...VR(rms) DC Blocking Voltage...VDC FRS16 FRS18 FRS110 1000 Volts 560 700 Volts 800 1000 Volts 100 200 400 600 800 35 70 140 280 420 50 100 200 400 600 Average Forward Rectified Current...IF(av) TA = 55°C (Note 3) ............................................. 1.0 ............................................... Amps Non-Repetitive Peak Forward Surge Current...IFSM @ Rated Current & Temp ............................................. 5 0 ............................................... Amps Operating & Storage Temperature Range...TJ, TSTRG ........................................ -65 to 150 ......................................... °C Maximum Forward Voltage @ 1.0A...VF ............................................. 1.3 ............................................... Volts Maximum DC Reverse Current...IR @ Rated DC Blocking Voltage ............................................. 5.0 ............................................... µAmps ............................................. 100 ............................................... µAmps Electrical Characteristics TA = 25°C TA = 100°C Typical Junction Capacitance...CJ (Note 1) Maximum Reverse Recovery Time...tRR Page 10-2 ............................................. 1 5 ............................................... 150 150 150 150 250 500 500 pF ns Forward Current Derating Curve Average Forward Current ( A) Peak Forward Surge Current (A) Non-Repetitive Peak Forward Surge Current Typical Junction Capacitance Typical Instantaneous Forward Characteristics Forward Current (A) Number of Cycles @ 60 Hz Junction Capacitance (pF) Ambient Temperature (°°C) TJ = 25°°C Reverse Voltage (V) 50 Ω (+) 25 VDC (-) NonInductive 10 Ω D.U.T 1Ω NonInductive FRS10 . . . 110 Series 1.0 Amp FAST RECOVERY RECTIFIERS Data Sheet Forward Voltage (V) (-) Pulse Generator Note 2 Oscilliscope Note 1 Notes: 1. Rise Time = 7 ns Max. Impedance = 1 megohm, 22 pF 2. Rise Time = 10 ns Max. Source Impedance = 50 Ohms (+) +.5A Reverse Recovery Characteristics tRR -.25A Ratings at 25 Deg. C ambient temperature unless otherwise specified. -1.0A Single Phase Half Wave, 60 Hz Resistive or Inductive Load. 0A 1 cm Time Base Set @ 50/100ns/cm NOTES: 1. Measured @ 1 MHz and applied reverse voltage of 4.0V. 2. Thermal Resistance Junction to Ambient, Jedec Method. 3. PCB mounted on 5.0mm2 (.013mm thick) copper pads. For Capacitive Load, Derate Current by 20%. Page 10-3