3.0 Amp Glass Passivated Sintered Rectifiers GPZ30A . . . 30M Series Preliminary Data Sheet Mechanical Dimensions Description JEDEC D0-201AD .285 .375 .190 .210 1.00 Min. .050 typ. Features n LOWEST COST FOR GLASS SINTERED CONSTRUCTION n 3.0 AMP OPERATION @ TA = 55°C, WITH NO THERMAL RUNAWAY n LOWEST VF FOR GLASS SINTERED CONSTRUCTION n SINTERED GLASS CAVITY-FREE JUNCTION n TYPICAL IR < 100 nAmps Electrical Characteristics @ 25 o C. Maximum Ratings Units GPZ30A . . . 30M Series 30A 30B 30D 30G 30J 30K 30M 100 200 400 600 800 1000 Volts Peak Repetitive Reverse Voltage...VRRM 50 RMS Reverse Voltage...VR(rms) 35 70 140 280 420 560 700 Volts DC Blocking Voltage...VDC 50 100 200 400 600 800 1000 Volts Average Forward Rectified Current...IF(av) Current 3/8" Lead Length @ TA = 55°C ............................................. 3.0 ............................................... Amps Non-Repetitive Peak Forward Surge Current...IFSM 8.3mS, ½ Sine Wave Superimposed on Rated Load ............................................. 1 2 5 ............................................... Amps Forward Voltage @ 3.0A...VF < ...... 1.1 ...... > < ............................. 1.0 ........................... > Volts Full Load Reverse Current...IR(av) Full Cycle Average @ TA = 55°C ............................................. 1 0 0 ............................................... µAmps ............................................. 5.0 ............................................... ............................................. 2 0 0 ............................................... µAmps Typical Junction Capacitance...CJ (Note 1) ............................................. 4 0 ............................................... pF Typical Thermal Resistance...RθJA (Note 2) ............................................. 1 5 ............................................... °C / W Typical Reverse Recovery Time...tRR (Note 3) ............................................. 2.0 ............................................... µS Operating & Storage Temperature Range...TJ, TSTRG ......................................... -65 to 175 .......................................... °C DC Reverse Current...IR(max) @ Rated DC Blocking Voltage T A = 25°C TA = 150°C Die Dimension (mils) Forward Current Derating Curve A 60 Hz RESISTIVE OR INDUCTIVE LOAD T Amps D Glass 0.375″″ (9.5mm) LEAD LENGTH G d D 126 TA = Ambient Temperature (°°C) d G 86 2+0.5 T 11 A 15+1 Typical Junction Capacitance Non-Repetitive Peak Forward Surge Current TJ = 25°°C f = 1.0 MHZ VSIG = 50mVp-p Amps pF TJ = TJ max. 8.3 mS Single Half Sine Wave (Jedec Method) GPZ30A . . . 30M Series 3.0 Amp Glass Passivated Sintered Rectifiers Preliminary Data Sheet Number of Cycles @ 60 HZ Reverse Voltage (Volts) Typical Instantaneous Forward Characteristics Typical Reverse Characteristics Amps µ Amps TJ = 125°°C TJ = 75°°C TJ = 25°°C Volts Percent of Rated Peak Voltage NOTES: 1. Measured @ 1 MHZ and applied reverse voltage of 4.0V. 2. Thermal Resistance from Junction to Ambient at 3/8" Lead Length, P.C. Board Mounted. 3. Reverse Recovery Condition IF = 0.5A, IR = 1.0A, IRR = 0.25A. Ratings at 25 Deg. C ambient temperature unless otherwise specified. Single Phase Half Wave, 60 HZ Resistive or Inductive Load. For Capacitive Load, Derate Current by 20%.