1.0 Amp Glass Passivated Sintered Rectifiers Preliminary Data Sheet Mechanical Dimensions GFZ10A . . . 10Q Series Description Package SMA Features n LOWEST COST FOR GLASS SINTERED CONSTRUCTION n 1.0 AMP OPERATION @ TA = 135°C, WITH NO THERMAL RUNAWAY n LOWEST VF FOR GLASS SINTERED CONSTRUCTION n SINTERED GLASS CAVITY-FREE JUNCTION n TYPICAL IR < 100 nAmps Electrical Characteristics @ 25 o C. Maximum Ratings Units GFZ10A . . . 10Q Series 10A 10B Peak Repetitive Reverse Voltage...VRRM 50 100 200 400 600 8 0 0 1000 1100 1200 Volts RMS Reverse Voltage...VR(rms) 35 70 140 280 420 560 840 Volts 50 100 200 400 600 8 0 0 1000 1100 1200 Volts DC Blocking Voltage...VDC 10D 10G 10J 10K 1 0 M 10N 700 770 10Q Average Forward Rectified Current...IF(av) @ TA = 135°C (Note 2) ............................................. 1.0 ............................................... Amps Non-Repetitive Peak Forward Surge Current...IFSM ½ Sine Wave Superimposed on Rated Load ............................................. 3 0 ............................................... Amps Forward Voltage @ 1.0A...VF < ..................... 1.1 .................. > Full Load Reverse Current...IR(av) Full Cycle Average @ TA = 75°C DC Reverse Current...IR(max) @ Rated DC Blocking Voltage TA = 25°C TA = 150°C Typical Junction Capacitance...CJ (Note 1) < ............. 1.2 ......... > Volts ............................................. 3 0 ............................................... µAmps ............................................. 5.0 ............................................... ............................................. 1 0 0 ............................................... µAmps µAmps < ............................... 8.0 ........................... > < .... 7.0 .... > pF Typical Thermal Resistance...RθJA (Note 2) ............................................. 4 5 ............................................... °C / W Typical Reverse Recovery Time...tRR (Note 3) ............................................. 2.0 ............................................... µS Operating & Storage Temperature Range...TJ, TSTRG ......................................... -65 to 175 .......................................... °C Die Dimension (mils) Forward Current Derating Curve A T Amps D Glass G d D 68 TL = Lead Temperature (°°C) d G 43 2+0.5 T 11 A 15+1 Typical Junction Capacitance Non-Repetitive Peak Forward Surge Current TJ = 25°°C f = 1.0 MHZ VSIG = 50mVp-p Amps pF TJ = 75°°C 8.3 mS Single Half Sine Wave (Jedec Method) GFZ10A . . . 10Q Series 1.0 Amp Glass Passivated Sintered Rectifiers Preliminary Data Sheet Number of Cycles @ 60 HZ Typical Instantaneous Forward Characteristics Reverse Voltage (Volts) Typical Reverse Characteristics TJ = 25°°C µS Pulse Width = 300µ 1% Duty Cycle µ Amps Amps TJ = 125°°C TJ = 75°°C TJ = 25°°C Volts Percent of Rated Peak Voltage NOTES: 1. Measured @ 1 MHZ and applied reverse voltage of 4.0V. 2. 5.0mm2 (.013mm thick) land areas. 3. Reverse Recovery Condition IF = 0.5A, IR = 1.0A, IRR = 0.25A. Ratings at 25 Deg. C ambient temperature unless otherwise specified. Single Phase Half Wave, 60 HZ Resistive or Inductive Load. For Capacitive Load, Derate Current by 20%.