RGFZ20A . . . 20M Series Preliminary Data Sheet 2.0 Amp Glass Passivated Sintered Fast Recovery Rectifiers Mechanical Dimensions Description 4.06/4.60 3.30/3.90 Cathode Package SMB 5.10/5/58 .11/.30 1.65/2.19 1.91/2.41 .01/.20 1.90/2.15 Features n LOWEST COST FOR GLASS SINTERED FAST RECOVERY CONSTRUCTION n 2.0 AMP OPERATION @ TA = 55°C, WITH NO THERMAL RUNAWAY n LOWEST VF FOR GLASS SINTERED FAST RECOVERY CONSTRUCTION n SINTERED GLASS CAVITY-FREE JUNCTION n TYPICAL IR < 100 nAmps Electrical Characteristics @ 25 o C. Maximum Ratings RGFZ20A . . . 20M Series 20A 20B 20D 20G 20J Units 20K 20M Peak Repetitive Reverse Voltage...VRRM 50 100 200 400 600 800 1000 Volts RMS Reverse Voltage...VR(rms) 35 70 140 280 420 560 700 Volts DC Blocking Voltage...VDC 50 100 200 400 600 800 1000 Volts Average Forward Rectified Current...I F(av) @ TL = 55°C (Note 2) ............................................. 2.0 ............................................... Amps Non-Repetitive Peak Forward Surge Current...IFSM 8.3mS, ½ Sine Wave Superimposed on Rated Load ............................................. 6 5 ............................................... Amps Forward Voltage @ 2.0A...VF ............................................. 1.3 ............................................... Volts Full Load Reverse Current...IR(av) Full Cycle Average @ TA = 55°C ............................................. 1 0 0 ............................................... µAmps ............................................. 5.0 ............................................... ............................................. 1 0 0 ............................................... µAmps Typical Junction Capacitance...CJ (Note 1) ............................................. 3 5 ............................................... pF Typical Thermal Resistance...RθJA (Note 2) ............................................. 1 6 ............................................... °C / W Maximum Reverse Recovery Time...tRR (Note 3) < ..................... 1 5 0 ................... > DC Reverse Current...IR(max) @ Rated DC Blocking Voltage TA = 25°C TA = 125°C < ....... 5 0 0 ...... > nS Operating & Storage Temperature Range...TJ, TSTRG ......................................... -65 to 175 .......................................... °C 250 Preliminary Data Sheet 2.0 Amp Glass Passivated Die Dimension (mils) Forward Current Derating Curve A RESISTIVE OR INDUCTIVE LOAD T Amps D Glass 0.375″″ (9.5mm) LEAD LENGTH G d D 96 TA = Ambient Temperature (°°C) d G 64 2+0.5 T 11 A 15+1 Typical Junction Capacitance Non-Repetitive Peak Forward Surge Current TJ = 25°°C f = 1.0 MHZ VSIG = 50mVp-p Amps pF TJ = TJ max. 8.3 mS Single Half Sine Wave (Jedec Method) RGFZ20A . . . 20M Series Sintered Fast Switching Rectifiers Number of Cycles @ 60 HZ Typical Instantaneous Forward Characteristics Reverse Voltage (Volts) Typical Reverse Characteristics TJ = 125°°C Amps µ Amps TJ = 100°°C TJ =75°°C TJ = 25°°C Volts Percent of Rated Peak Voltage NOTES: 1. Measured @ 1 MHZ and applied reverse voltage of 4.0V. 2. 5.0mm2 (.013mm thick) land areas. 3. Reverse Recovery Condition IF = 0.5A, IR = 1.0A, IRR = 0.25A. Ratings at 25 Deg. C ambient temperature unless otherwise specified. Single Phase Half Wave, 60 HZ Resistive or Inductive Load. For Capacitive Load, Derate Current by 20%.