SMD FYLS-0603BUBC-5 Radiation pattern. Features: z z Compatible with automatic placement equipment Compatible with reflow solder process. Applications: z z z z Automotive-Telecommunication Indicators Lcd Back-lights Illuminations Relative Lumionous Intensity(LOP @max=1) Descriptions: z z z Dice material: InGaN. Emitting Color: Blue. Lens Color: Water clear. Absolute maximum ratings(Ta=25 ゜с) Parameter MAX. Unit 70 mW 100 mA Continuous Forward Current 20 mA Derating Linear From 25℃ 0.4 mA/℃ Power Dissipation Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Operating Temperature Range -30℃ to +80℃ Storage Temperature Range -40℃ to +85℃ Lead Soldering Temperature[4mm(.157”) From Body] 260℃ for 5 Seconds Electrical and optical characteristics(Ta=25 ゜с) Parameter Symbol Min. Typ. Max. Unit IV -- 45 -- mcd Viewing Angle 2θ1/2 120 130 140 Deg Peak Emission λp 465 470 475 nm Dominant Wavelength λd 460 465 470 nm Spectral Line Half-Width △λ 10 15 20 nm Forward Voltage VF 2.8 3.2 3.6 V Reverse Current IR 10 µA Luminous Intensity 115 QiXin Road, NingBo, Zhejiang, China 315051 TEL:86-574-87927870, 87933652 FAX:86-574-87927917 E-mail:[email protected] http:/www.foryard.com Test Condition IF=5mA VR=5V SMD Typical Electrical Characteristics Curves (25 ゜с Ambient Temperature Unless Otherwise Noted) Spectral Reduance Normalized Response ) 1 ( (1)peak@470nm /Blue Relative Luminous intensity vs Forward current Forward Current Vs Forward Voltage Relative Intensity (Lop@20mA=1) Forward Current(mA) 50 40 30 20 10 0 2.7 2.9 3.3 3.1 3.5 3.7 3.9 4.1 4.3 4.5 4.7 Forward Current IF(mA) Forward Voltage(V) Luminous Intensity Vs.Ambient Temperature Forward Current Derating Curve 0 4 0 3 0 2 0 0 1 0 9 0 8 0 7 0 6 0 5 0 4 0 3 0 2 0 1 0 Relative Luminous Intensity 0 5 Forward Current(mA) 0 6 Ambient Temperature TA( ) 115 QiXin Road, NingBo, Zhejiang, China 315051 TEL:86-574-87927870, 87933652 FAX:86-574-87927917 E-mail:[email protected] http:/www.foryard.com Ambient Temperature TA( C ) SMD Precautions For Use 1.Suggest the LEDs should be kept between 5℃ and 30℃and 60%RH or less before opening the package, The max. storage period before opening the package is 1 year. 2. After opening the package, the LEDs should be kept at 30℃/35%RH or less, and it should be used within3 hours. In the event of incomplete usage, it is advised that user preheat the remaining devices at 60±5℃ for 8 hours prior to use. 3. Reflow soldering should not be done more than twice. When soldering, don’t tress on LEDs during heating. After soldering, don’t warp the circuit board. 4. Repair should not be done after the LEDs have been soldered. When repair is unavoidable, Double-head soldering iron should be used. It should be confirmed beforehand whether the characteristics of the LEDs will be damaged by repair or not. Soldering Iron: z Temperature at tip of iron:300 ゜с Max.(25W Max) z Soldering time: 3±1sec. Please refer to the following figure： 115 QiXin Road, NingBo, Zhejiang, China 315051 TEL:86-574-87927870, 87933652 FAX:86-574-87927917 E-mail:[email protected] http:/www.foryard.com SMD Package Dimensions of Device . Soldering Terminal 0.2 0.8 0.3 Cathode Mark 0.8 1.0 0.6 1.2 PCB 1.0 1.6 LED Die 0.7 0.8 0.8 Resin 0.4 0.3 0.6 0.3 Unit:mm(inches) Tape Specification: 4000pcs Per Reel. Item Spec. Tolerance Item Spec. Tolerance W P1 E F D0 D1 P0 Unit 8.00 4.00 1.75 3.50 1.50 1.00 4.00 mm 0.32 0.16 0.07 0.14 0.06 0.04 0.16 inches ±0.20 ±0.10 ±0.10 ±0.05 +0.1/-0 ±0.05 ±0.05 mm ±0.0078 ±0.004 ±0.07 ±0.002 ±0.004/0 ±0.002 ±0.002 inches 10P0 P2 A0 B0 K0 T Unit 40.00 2.00 1.85 3.45 1.27 0.22 mm 1.57 0.08 0.07 0.14 0.05 0.01 inches ±0.20 ±0.05 ±0.10 ±0.10 ±0.10 ±0.05 mm ±0.0078 ±0.002 ±0.004 ±0.004 ±0.004 ±0.002 inches Cathode P2 P0 K0 E A' F D0 B0 W D1 5° A0 P1 t A' SEC:A-A' 9.0(.35)±0.2(.0078) Packing and Shipping Spec. 12.0(.47)±0.15(.006)) 115 QiXin Road, NingBo, Zhejiang, China 315051 TEL:86-574-87927870, 87933652 FAX:86-574-87927917 E-mail:[email protected] http:/www.foryard.com ? 13.5(.53)± 0.2(.008) ? 178(7.0)± 1.0(.04) sb ? 60(2.36)+ .5(.0197)/-0 Package Dimensions of Reel: Unit:mm(inches) SMD L1 sb W1 sb Zip-lock Desiccant Antistatic Bag Spec. Spec. Spec. 203.0. 198.0 Unit:mm ) s c p ( Y T ' Q Box Dimension(cm):30 * 19* 11.5 Desiccant . O N T R A P 10 Reels per box CARTON Dimension(cm):39*32*38 6boxs/carton 0603B/0603/0805: 4000pcs*10Reels*6boxs S G K S G K M C 8 3 * 1 3 * 8 3 W W : S . G . N A E M C/NO 115 QiXin Road, NingBo, Zhejiang, China 315051 TEL:86-574-87927870, 87933652 FAX:86-574-87927917 E-mail:[email protected] http:/www.foryard.com 0805B/1206B/1206 1210/1204: 3000pcs*10Reels*6boxs* 3528:2000pcs*10Reels*6boxs 5050:1000pcs*8Reels*6boxs