1MBI600PX-140 IGBT Module P-Series 1400V / 600A 1 in one-package Features · Small temperature dependence of the turn-off switching loss · Easy to connect in parallel · Wide RBSOA (square up to 2 time of rated current) and high shortcircuit withstand capability · Low loss and soft-switching (reduction of EMI noise) Equivalent Circuit Schematic Applications · General purpose inverter · AC Servo systems (Drive unit) · UPS (Uninterruptible Power Supply) Maximum ratings and characteristics Absolute maximum ratings (at Tc=25°C unless otherwise specified) Item Collector-Emitter voltage Gate-Emitter voltage Collector current Collector Power Dissipation Junction temperature Storage temperature Isolation voltage between terminal and copper base *1 Screw Torque Mounting *2 Terminals *3 *4 Symbol VCES VGES IC Conditions IC pulse 1ms -IC -IC pulse PC Tj Tstg Viso Continuous 1ms Continuous Tc=25°C Tc=80°C Tc=25°C Tc=80°C AC:1min. Rating 1400 ±20 800 600 1600 1200 600 1200 4100 +150 -40 to +125 2500 4.5 11.0 1.7 Unit V V A W °C VAC N·m *1 : All terminals should be connected together when isolation test will be done. Recommendable value : *2 4.0±0.5 N·m(M6), *3 10.0±1.0 N·m(M8), *4 1.50±0.2 N·m(M4) Electrical characteristics (at Tj=25°C unless otherwise specified) Item Zero gate voltage collector current Gate-Emitter leakage current Gate-Emitter threshold voltage Collector-Emitter saturation voltage Input capacitance Output capacitance Reverse transfer capacitance Turn-on time Turn-off time Diode forward on voltage Reverse recovery time Symbols ICES IGES VGE(th) VCE(sat) Cies Coes Cres ton tr toff tf VF t rr Conditions VGE=0V, VCE=1400V VCE=0V, VGE=±20V VCE=20V, IC=600mA VGE=15V, IC=600A, Tj=25°C VCE=10V VGE=0V f=1MHz VCC =600V IC=600A VGE=±15V RG=2.0 Ω IF=600A, VGE=0V IF=600A Characteristics Min. Typ. – – – – 6.0 8.0 – 2.85 – 60 – 9 – 4 – 0.75 – 0.20 – 0.65 – 0.10 – – – – Max. 2.0 0.5 9.0 3.2 – – – 1.20 0.60 1.00 0.30 3.4 0.35 Unit Characteristics Min. Typ. – – – – – 0.0063 Max. 0.03 0.06 – mA µA V V nF µs V µs Thermal resistance characteristics Items Thermal resistance Contact Thermal resistance Symbols Rth(j-c) Rth(j-c) Rth(c-f)*4 Conditions IGBT Diode the base to cooling fin *4 : This is the value which is defined mounting on the additional cooling fin with thermal compound. Unit °C/W °C/W °C/W 1MBI600PX-140 Characteristics (Representative) IGBT Module 1MBI600PX-140 IGBT Module 1MBI600PX-140 Outline Drawings, mm M138 IGBT Module