BYM56C SINTERED GLASS JUNCTION AVALANCHE RECTIFIER VOLTAGE： ：600V CURRENT: 3.5A FEATURE SOD-64 Glass passivated High maximum operating temperature Low leakage current Excellent stability Guaranteed avalanche energy absorption capability MECHANICAL DATA Case: SOD-64 sintered glass case Terminal: Plated axial leads solderable per MIL-STD 202E, method 208C Polarity: color band denotes cathode end Mounting position: any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated) SYMBOL BYM56C units VRRM VRMS VDC 600 V 420 V 600 V Reverse avalanche breakdown voltage at IR = 0.1 mA V(BR)R 650min V Maximum Average Forward Rectified Current 3/8”lead length at Ttp =60°C Non-repetitive Peak Forward Surge Current at Tp=10ms half sinewave Maximum Forward Voltage at 3A and 25℃ Non-repetitive peak reverse avalanche energy (Note 1) IFAV 3.5 A IFSM 80 A VF 1.15 V ERSM 20 mJ IR 1.0 150.0 µA 90 pF 75 °C /W °C Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Maximum DC Reverse Current at rated DC blocking voltage Diode Capacitance Ta =25°C Ta =165°C (Note 2) Typical Thermal Resistance Storage and Operating Junction Temperature (Note 3) Cd Rth(ja) Tstg, Tj -65 to +175 Note: 1. L=120mH; Tj=Tjmax prior to surge; inductive load switched off 2. Measured at 1.0 MHz and applied reverse voltage of 0Vdc 3. Device mounted on an epoxy-glass printed-circuit board, 1.5mm thick Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES BYM56C Rev.A1 www.gulfsemi.com