BYV95A SINTERED GLASS JUNCTION FAST AVALANCHE RECTIFIER VOLTAGE: 200V CURRENT: 1.5A FEATURE SOD-57 Glass passivated High maximum operating temperature Low leakage current Excellent stability Guaranteed avalanche energy absorption capability MECHANICAL DATA Case: SOD-57 sintered glass case Terminal: Plated axial leads solderable per MIL-STD 202E, method 208C Polarity: color band denotes cathode end Mounting position: any Dimensions in millimeters MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated) SYMBOL BYV95A units Maximum Recurrent Peak Reverse Voltage VRRM 200 V Maximum RMS Voltage VRMS 140 V Maximum DC blocking Voltage VDC 200 V V(BR)R 300min V IF(AV) 1.5 A Ifsm 35 A Maximum Forward Voltage at IF = 3.0A and 25°C VF 1.6 V Maximum DC Reverse Current at rated DC blocking voltage IR 5.0 150 µA (Note 1) Trr 250 nS Non Repetitive Reverse Avalanche Energy (Note 2) ER 10 mJ Typical Junction Capacitance (Note 3) Cj 45 pF Typical Thermal Resistance (Note 4) Rth(ja) 46 K/W Tstg, Tj -65 to +175 ℃ Reverse Breakdown Voltage at IR =0. 1mA Maximum Average Forward Rectified Current 3/8”lead length at Ta =65°C Peak Forward Surge Current 8.3ms single half sinewave superimposed on rated load Maximum Reverse Recovery Time Tj = 25°C Tj = 150°C Storage and Operating Junction Temperature Note: 1. 2. 3. 4. Rev.A1 Reverse Recovery Condition IF = 0.5A, IR = 1.0A, IRR = 0.25A L = 120 mH; Tj = Tj max prior to surge; inductive load switched off Measured at 1.0 MHz and applied reverse voltage of 4Vdc Thermal Resistance from Junction to Ambient at 3/8”lead length, P.C. Board Mounted www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES BYV95A Rev.A1 www.gulfsemi.com