BYV28-6 SINTERED GLASS JUNCTION ULTRAFAST AVALANCHE RECTIFIER VOLTAGE： ：600V CURRENT: 3.1A FEATURE SOD-64 Glass passivated High maximum operating temperature Low leakage current Excellent stability Guaranteed avalanche energy absorption capability MECHANICAL DATA Case: SOD-64 sintered glass case Terminal: Plated axial leads solderable per MIL-STD 202E, method 208C Polarity: color band denotes cathode end Mounting position: any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated) SYMBOL BYV28-6 units Maximum Recurrent Peak Reverse Voltage VRRM 600 V Maximum RMS Voltage VRMS 420 V Maximum DC blocking Voltage VDC 600 V Maximum Average Forward Rectified Current 3/8”lead length at I =10mm Peak Forward Surge Current at tp=10ms,half sinewave Maximum Forward Voltage at Forward Current IF=3.5A and 25℃ Non-repetitive peak reverse avalanche energy (Note 1) Maximum DC Reverse Current Ta =25°C at rated DC blocking voltage Ta =150°C IFAV 3.1 A IFSM 90 A VF 1.25 V ERSM 20 mJ IR 5.0 150.0 µA Maximum Reverse Recovery Time (Note 2) Trr 50 nS Typical Thermal Resistance (Note 3) Rth(ja) 75 K/W Tstg, Tj -65 to +175 °C Storage and Operating Junction Temperature Note: 1. L=120Mh,Tj-Tjmax prior to surge; inductive load switched off 2. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A 3. Device mounted on an epoxy-glass printed-circuit board, 1.5mm thick; thickness of Cu-layer≥40μm Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES BYV28-6 Rev. A1 www.gulfsemi.com