ERB05GG GLASS PASSIVATED FAST RECOVERY RECTIFIER VOLTAGE:400 CURRENT: 0.5A FEATURE DO-41\DO-204AL Molded case feature for auto insertion High current capability Low leakage current Fast switching capability High temperature soldering guaranteed 250°C /10sec/0.375" lead length at 5 lbs tension Glass Passivated chip MECHANICAL DATA Terminal: Plated axial leads solderable per MIL-STD 202E, method 208C Case: Molded with UL-94 Class V-0 recognized Flame Retardant Epoxy Polarity: color band denotes cathode Mounting position: any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated) SYMBOL ERB05GG units Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Vrrm Vrms Vdc 400 280 400 V V V Maximum Average Forward Rectified Current 3/8”lead length at Ta =55℃ Peak Forward Surge Current 8.3ms single half sinewave superimposed on rated load Maximum Forward Voltage at rated Forward Current and 25℃ Maximum full load reverse current full cycle average at 55℃ Ambient Maximum DC Reverse Current Ta =25℃ at rated DC blocking voltage Ta =150℃ Maximum Reverse Recovery Time (Note 1) Typical Junction Capacitance (Note 2) Typical Thermal Resistance (Note 3) Storage and Operating Junction Temperature If(av) 0.5 A Ifsm 10.0 A Vf 1.2 V Ir(av) 100.0 µA 5.0 100.0 150 15.0 55.0 -55 to +150 µA µA Ir Trr Cj Rth(ja) Tstg, Tj nS pF ℃ /W ℃ Note: 1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A 2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc 3. Thermal Resistance from Junction to Ambient at 3/8”lead length, P.C. Board Mounted Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES ERB05GG Rev.A1 www.gulfsemi.com