SB15100F SCHOTTKY BARRIER RECTIFIER VOLTAGE: 100V CURRENT: 15.0A FEATURE ITO-220AC High current capability, Low forward voltage drop Low power loss, high efficiency High surge capability High temperature soldering guaranteed 250°C /10sec/0.375" lead length at 5 lbs tension MECHANICAL DATA Case: JEDEC ITO-220 molded plastic body over passivated chip Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated) SYMBOL SB15100F units Maximum Recurrent Peak Reverse Voltage Vrrm 100 V Maximum RMS Voltage Vrms 70 V Vdc 100 V at If(av) 15 A Peak Forward Surge Current 8.3ms single half sinewave superimposed on rated load Ifsm 150 A Vf 0.80 V Ir 250 6.0 μA mA (Note 1) Rth(jc) 5.5 °C/W Operating Junction and Storage Temperature Ramge Tj, Tstg -65 to +150 °C Maximum DC blocking Voltage Maximum Average Forward Rectified Current Tc=133°C Maximum Forward Voltage at 15A Maximum DC Reverse Current at rated DC blocking voltage Typical Thermal Resistance Ta =25°C Ta =110°C Note: 1.Thermal Resistance from Junction to Case Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES SB15100F Rev.A1 www.gulfsemi.com