Infrared LED L9337 series High power LED for optical switches The L9337 series is an infrared LED developed for optical switches. Because a high-power LED chip is mounted, the L9337 series provides higher radiant output power than previous devices, yet is available at a low cost due to the improved manufacturing process. The L9337-01/-02 use a high reliability package making them suitable for automobile applications. Features Applications High radiant output power Optical switches High reliability Automobiles Low price Absolute maximum ratings (Ta=25 °C, unless otherwise noted) Parameter Symbol Condition Reverse voltage VR Forward current IF Forward current decrease rate Ta > 25 °C Pulse width=10 μs Pulse forward current IFP Duty ratio=1% Pulse forward current Ta > 25 °C decrease rate Power dissipation P Operating temperature Topr Storage temperature Tstg Value 5 80 1.1 Unit V mA mA/°C 1.0 A 13 mA/°C 150 -30 to +85 -40 to +100*1 mW °C °C *1: The L9337 is guaranteed to resist temperature cycle test of up to 5 cycles. Electrical and optical characteristics (Ta=25 °C) Parameter Peak emission wavelength Spectral half width Forward voltage Pulse forward voltage Reverse current Radiant flux Cut-off frequency*2 Symbol λp Δλ VF VFP IR φe fc Condition IF=50 mA IF=50 mA IF=50 mA IF=1 A VR=5 V IF=50 mA IF=50 mA ± 4 mAp-p Min. 840 18 25 L9337 Typ. 870 45 1.47 3.5 23 40 L9337-01 L9337-02 Max. Min. Typ. Max. Min. Typ. Max. 900 840 870 900 840 870 900 45 45 1.55 1.47 1.55 1.47 1.55 4.3 3.5 4.3 3.5 4.3 5 5 5 10 13 7.5 10 25 40 25 40 - Unit nm nm V V μA mW MHz *2: Frequency at which the optical output drops by -3 dB from that at 100 kHz. www.hamamatsu.com 1 Infrared LED L9337 series Emission spectrum Radiant flux vs. forward current (Typ. Ta=25 °C, IF=50 mA) 100 (Typ. Ta=25 °C, tw=100 µs, 0.1%) 1000 100 Radiant flux (mW) Relative radiant output (%) 80 60 40 L9337 L9337-01 10 L9337-02 20 0 810 830 850 870 890 910 1 930 10 100 Wavelength (nm) 1000 Forward current (mA) KLEDB0249EA Forward current vs. forward voltage KLEDB0250EB Directivity (Typ. Ta=25 °C) (Typ. Ta=25 °C, tw=100 µs, 0.1%) 1000 20° 10° 100 % 10° 20° L9337-01 Forward current (mA) 30° L9337 L9337-02 30° 80% 40° 100 50° 60% 40% 60° 70° 10 1.0 1.5 2.0 2.5 3.0 3.5 4.0 40° 50° 60° 20 % 70° 80° 80° 90° 90° Forward voltage (V) Relative radiant output (%) KLEDB0251EB KLEDB0252EB 2 Infrared LED L9337 series Radiant output vs. ambient temperature (Typ. IF=50 mA) 1 0 -1 -2 -3 -40 (Typ.) Relative allowable forward current (%) 2 Relative radiant output (dB) Allowable forward current vs. ambient temperature -20 0 20 40 60 80 100 Ambient temperature (°C) 100 80 60 40 20 0 -40 -20 0 20 40 60 80 100 Ambient temperature (°C) KLEDB0253EA KLEDB0254EA Allowable forward current vs. duty ratio (Typ. Ta=25 °C) Allowable forward current (A) 10 PULSE WIDTH=1 µs 1 PULSE WIDTH=10 µs PULSE WIDTH=100 µs 0.1 0.01 0.01 0.1 1 10 100 Duty ratio (%) KLEDB0038EA 3 Infrared LED L9337 series Dimensional outlines (unit: mm) L9337-01 13.5 6.65 ± 0.2 13.5 0.45 Lead 2.54 ± 0.2 4.7 ± 0.1 ňŭŢŴŴġŸŪůťŰŸġġġ 3.0 ± 0.1 4.5 ± 0.2 0.45 ± 0.05 Lead 5.4 ± 0.2 4.65 ± 0.1 13.5 ± 1 4.2 ± 0.1 1.12 ± 0.1 Clear epoxy resin 5.4 ± 0.2 2.3 ± 0.3 5.4 ± 0.1 L9337-02 3.6 ± 0.2 L9337 0.45 Lead 2.54 ± 0.2 2.54 ± 0.2 Common to case KLEDA0081EA Common to case Common to case KLEDA0092EA KLEDA0093EA Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. Type numbers of products listed in the specification sheets or supplied as samples may have a suffix “(X)” which means tentative specifications or a suffix “(Z)” which means developmental specifications. ©2010 Hamamatsu Photonics K.K. www.hamamatsu.com HAMAMATSU PHOTONICS K.K., Solid State Division 1126-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-8558 Japan, Telephone: (81) 53-434-3311, Fax: (81) 53-434-5184 U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P.O.Box 6910, Bridgewater, N.J. 08807-0910, U.S.A., Telephone: (1) 908-231-0960, Fax: (1) 908-231-1218 Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 8152-375-0, Fax: (49) 8152-265-8 France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10 United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777 North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171 41 Solna, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01 Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1 int. 6, 20020 Arese, (Milano), Italy, Telephone: (39) 02-935-81-733, Fax: (39) 02-935-81-741 Cat. No. KLED1043E02 Aug. 2010 DN 4