assuredcommunications® KGV-72 TYPE-1 PROGRAMMABLE ENCRYPTION DEVICE Network-centric, programmable link encryptor optimized for secure force tracking NSA Certified The KGV-72 Type-1 Programmable Encryption Device features a modular architecture with the programmability and scalability to accommodate a wide range of link and Internet Protocol (IP) in-line network encryption applications. Developed as part of the Force XXI Battle Command, Brigade-and-Below (FBCB2) Type-1 Encryption Device (T1ED) Program, the KGV-72 is a high-grade security solution that is compatible with existing and future Blue Force Tracking (BFT) terminals and transceivers. Its flexible, software-upgradeable design supports both legacy FBCB2 L-band/BLOS link communications and evolving IP standards. The KGV-72 is secured with the programmable National Security Agency (NSA)-certified Sierra II™ encryption module, which meets all requirements of the NSA’s Cryptographic Modernization initiative. Programming of Suite-A and Suite-B algorithms is also supported, allowing the KGV-72 to be used for a wide range of in-line network applications. The KGV-72 operates seamlessly with installed FBCB2 remote computers and provides high-grade traffic data encryption. For easy operation, the KGV-72 front panel features only a single knob and LED. Tested to MIL-STD-810F requirements, the KGV-72 is a military-rugged encryption device in a compact, form factor package ideal for secure force tracking applications. Specifications for the KGV-72 General Interfaces Application Programmable Type-1 encryption for applications such as Force Tracking Control & Indicators Front panel (single knob and single LED) or remote control via attached FBCB2 computer Certification NSA Type-1 Power 28 volt nominal Key Management Both Red and Black key fill Stores up to 125 TEKs and KEKs Fill DS-101 Red Data 10/100 Ethernet; RS-422 (configurable to rates of 9.6, 19.2, 38.4, 57.6, 76.8, and 115.2 kbps) Black Data Same rates as Red Data Physical Size 4.5 x 7.5 x 3 in. (11.4 x 19.1 x 7.6 cm), not including cable dress Weight 3 lbs. (1.4 kg), not including cables Mounting Mounting screws (4) and provisions for a Series 200 lock included Optional mounting available for CCI equipment Power Environmental Durability Power Consumption 6 watts (typical) Voltage 28 volt vehicles nominal Input Range 10–30 volts Over/Under/Reverse protection per MIL-STD-1275 Hold-Up Battery Type ½ AA 14250C: NSN 613501-525-9943 MIL–STD-810F Operating & Storage Temperature -40° to +70° C 6-pin fill compatible with AN/CYZ10 and SKL MS3114E14-19S Red/Black connector (2) Mounting holes (4) MS3114E12-3S Power connector 0.4 A Hold-Up Battery Lock provision Based on the embedment of the Harris Sierra II module LED On/Off/Fill/Zeroize Package Dimensions: 2.75 x 4.5 x 7.5 inches Weight: 3 lbs. RF Communications | 1680 University Ave. | Rochester, NY USA 14610 | 585.244.5830 | www.harris.com Get quotes real-time at eHarris. Order parts online at: https://premier.harris.com/rfcommsales These item(s)/technical data have been reviewed in accordance with the international traffic in arms regulations, 22 CFR 12 – 130, and the export administration regulations, 15 CFR 730 – 774, and determined by the export control department to be rated EAR99. General prohibitions apply. Specifications subject to change without notice. Copyright © 2009 Harris Corporation 03/09 DS-431