HMC410MS8G / 410MS8GE D E U N I T N O T C C S U I D D O PR v02.0607 10 GaAs MMIC DOUBLE-BALANCED HIGH IP3 MIXER, 9 - 15 GHz Typical Applications Features The HMC410MS8G / HMC410MS8GE is ideal for: Conversion Loss: 8 dB • Long Haul Radio Platforms LO/RF Isolation: 40 dB • Microwave Radio LO/IF Isolation: 37 dB • VSAT Input IP3: +24 dBm Mixers - SINGLE & DOUBLE BALANCED - SMT No External Components ew N r o ed f MSOP8G SMT Package Functional Diagram Re t o N ns g i s De d enGeneral m Description com The HMC410MS8G & HMC410MS8GE are passive double balanced high IP3 mixers that operate between 9 GHz and 15 GHz. The HMC410MS8G & HMC410MS8GE operate with LO drive levels between +13 dBm and +19 dBm, and provide 8 dB conversion loss across the entire specified frequency band. These mixers require no external components or bias. Electrical Specifications, TA = +25° C IF = 1.45 GHz LO = +17 dBm Parameter Min. Typ. Units Max. Frequency Range, RF & LO 9.0 - 15.0 GHz Frequency Range, IF DC - 2.5 GHz Conversion Loss 8 11 dB Noise Figure (SSB) 8 11 dB LO to RF Isolation 30 40 - 45 dB LO to IF Isolation 30 37 dB RF to IF Isolation 8 17 dB IP3 (Input) 20 24 dBm 1 dB Compression (Input) 11 14 dBm * Unless otherwise noted, all measurements performed as downconverter, IF= 1.45 GHz. 10 - 1 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC410MS8G / 410MS8GE D E U N I T N O T C C S U I D D O PR v02.0607 GaAs MMIC DOUBLE-BALANCED HIGH IP3 MIXER, 9 - 15 GHz Conversion Gain vs. Temperature @ LO = +17 dBm 0 RF/IF LO/RF LO/IF -5 -10 ISOLATION (dB) CONVERSION GAIN (dB) -10 +25 C -40 C +85 C -15 -20 -30 wD e N or f d e -40 10 ns g i s e -50 end m com -60 8 9 10 11 12 13 14 15 e ot R FREQUENCY (GHz) N 16 Conversion Gain vs. LO Drive 8 9 10 11 12 13 14 15 16 14 15 16 15 16 FREQUENCY (GHz) Return Loss @ LO = +17 dBm 0 0 -5 -5 RETURN LOSS (dB) CONVERSION GAIN (dB) -20 -10 LO = +11 dBm LO = +13 dBm LO = +15 dBm LO = +17 dBm LO = +19 dBm -15 -10 -15 RF LO -20 -25 -20 8 9 10 11 12 13 14 15 8 16 9 10 11 12 13 FREQUENCY (GHz) FREQUENCY (GHz) Upconverter Performance Conversion Gain @ LO = +17 dBm IF Bandwidth @ LO = +17 dBm 0 0 CONVERSION GAIN (dB) RESPONSE (dB) -5 -10 -15 -20 IF CONVERSION GAIN IF RETURN LOSS -25 -30 -5 -10 Mixers - SINGLE & DOUBLE BALANCED - SMT 0 Isolation @ LO = +17 dBm -15 -20 0 0.5 1 1.5 2 FREQUENCY (GHz) 2.5 3 8 9 10 11 12 13 14 FREQUENCY (GHz) For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 10 - 2 HMC410MS8G / 410MS8GE D E U N I T N O T C C S U I D D O PR v02.0607 GaAs MMIC DOUBLE-BALANCED HIGH IP3 MIXER, 9 - 15 GHz Input IP3 vs. Temperature @ LO = +17 dBm* Input IP3 vs. LO Drive* 35 35 +25 C -40 C +85 C 30 IP3 (dBm) IP3 (dBm) 25 25 ew N r o ed f ns g i s De 20 20 end m com 15 15 9 10 11 12 13 FREQUENCY (GHz) N 14 e ot R 15 9 10 11 12 13 14 15 14 15 FREQUENCY (GHz) Input P1dB vs. Temperature @ LO = +17 dBm Input IP2 vs. LO Drive * 20 70 LO = +15 dBm LO = +17 dBm LO = +19 dBm 65 +25 C -40 C +85 C 18 P1dB (dBm) 60 IP2 (dBm) Mixers - SINGLE & DOUBLE BALANCED - SMT 10 LO = +15 dBm LO = +17 dBm LO = +19 dBm 30 55 50 16 14 12 45 10 40 9 10 11 12 13 14 15 9 10 11 12 MxN Spurious @ IF Port Harmonics of LO nLO Spur @ RF Port nLO mRF 0 1 2 0 XX 4 1 15 0 2 85 70 67 3 >90 >90 4 N/A >90 13 FREQUENCY (GHz) FREQUENCY (GHz) LO Freq. (GHz) 1 2 3 4 3 4 28 23 N/A 9 34 28 46 60 40 62 46 10.5 37 37 50 69 78 83 12 44 45 46 60 >90 79 >90 13.5 47 46 62 N/A >90 >90 >90 15 40 56 58 N/A 16.5 34 47 51 N/A RF = 14.45 GHz @ -10 dBm LO = 13 GHz @ +17 dBm All values in dBc relative to the IF power level. Measured as downconverter. LO = +17 dBm All values in dBc below input LO level @ RF port. * Two-tone input power = 0 dBm each tone, 1 MHz spacing. 10 - 3 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC410MS8G / 410MS8GE D E U N I T N O T C C S U I D D O PR v02.0607 GaAs MMIC DOUBLE-BALANCED HIGH IP3 MIXER, 9 - 15 GHz Absolute Maximum Ratings RF / IF Input +20 dBm +27 dBm IF DC Current ±4 mA Storage Temperature -65 to +150 °C Operating Temperature -40 to +85 °C ESD Sensitivity (HBM) Class 1A ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Re t o N Outline Drawing end m com wD e N or f d e ns g i s e NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number Package Body Material Lead Finish MSL Rating HMC410MS8G Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 [1] HMC410MS8GE RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 [2] 10 Mixers - SINGLE & DOUBLE BALANCED - SMT LO Drive Package Marking [3] H410 XXXX H410 XXXX [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 10 - 4 HMC410MS8G / 410MS8GE D E U N I T N O T C C S U I D D O PR v02.0607 GaAs MMIC DOUBLE-BALANCED HIGH IP3 MIXER, 9 - 15 GHz Pin Descriptions Pin Number 10 1, 8 Mixers - SINGLE & DOUBLE BALANCED - SMT 2 10 - 5 3, 4, 6 Function Description GND Pins and exposed ground slug must be connected to RF ground. LO This pin is AC coupled & matched to 50 Ohms from 9.0 to 15.0 GHz. N/C end m com Not connected. Re t o N Interface Schematic ew N r o ed f 5 IF This pin is DC coupled. For applications not requiring operation to DC this port should be DC blocked externally using a series capacitor whose value has been chosen to pass the necessary IF frequency range. For operation to DC, this pin must not source/sink more than 4mA of current or die nonfuntcion and possible die failure will result. 7 RF This pin is DC coupled & matched to 50 Ohms from 9.0 to 15.0 GHz. ns g i s De For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC410MS8G / 410MS8GE D E U N I T N O T C C S U I D D O PR v02.0607 GaAs MMIC DOUBLE-BALANCED HIGH IP3 MIXER, 9 - 15 GHz Evaluation PCB List of Materials for Evaluation PCB 103350 [1] Item Description J1 - J2 PCB Mount SMA RF Connector, SRI J3 PCB Mount SMA Connector, Johnson U1 HMC410MS8G / HMC410MS8GE PCB [2] 101650 Evaluation Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 10 Mixers - SINGLE & DOUBLE BALANCED - SMT Re t o N end m com wD e N or f d e ns g i s e 10 - 6