HITTITE HMC871LC5_1010

HMC871LC5
v03.1010
Typical Applications
Features
The HMC871LC5 is ideal for:
Wide Supply Range from 5V to 8V
• SONET OC-192 & SDH-STM-64
Transmission Systems
Adjustable Output Amplitude up to 4 Vp-p
• 10 GbE Transmitters
• 10 Gbps VSR Modules
Low DC Power Consumption,
0.25W for Vout = 2.5 Vp-p at Vdd = 5V
• Pre-driver for 40 Gbps DQPSK Modules
Cross Point Adjustment
• Broadband Gain Block for
Test & Measurement Equipment
32 Lead 5x5mm SMT Package: 25mm²
Functional Diagram
General Description
OPTICAL & MODULATOR DRIVERS - SMT
Low Additive RMS Jitter, <300 fs
The HMC871LC5 is a GaAs MMIC PHEMT Distributed Driver Amplifier packaged in a leadless 5x5mm
surface mount package. The amplifier operates
between DC and 20 GHz and provides 15 dB of
gain. The output swing cross point is adjustable
and saturated output swing is 4Vp-p. Gain flatness
is excellent at ±0.5 dB as well as very low additive
RMS jitter of 300 fs for 10 Gbps operation. The
HMC871LC5 provides VSR and Gigabit Ethernet
designers with scalable power dissipation for
varying output drive requirements (<0.25W at Vout =
2.5 Vp-p and <0.6W at Vout = 4 Vp-p). The HMC871LC5 has a very wide supply (Vdd) operating range
from +5V to +8V and the I/Os are internally matched to
50 Ohms.
8
8-1
EA OPTICAL MODULATOR
DRIVER, DC - 20 GHz
Electrical Specifications, TA = +25° C, Vdd = 8V, VC = 0.5V, Idd = 75mA*
Parameter
Gain
Small Signal Bandwidth
Conditions
Min.
Typ.
Max.
Units
Frequency = 1 - 8 GHz
Frequency = 8 - 16 GHz
Frequency = 16 - 20 GHz
13
12
10
16
15
13.5
dB
dB
dB
3-dB cutoff
17.5
GHz
Input Return Loss
Frequency = 1 - 10 GHz
Frequency = 10 - 20 GHz
20
10
dB
dB
Output Return Loss
Frequency = 1 - 10 GHz
Frequency = 10 - 20 GHz
15
10
dB
dB
Gain Variation Over Temperature
Frequency = 1 - 10 GHz
Frequency = 10 - 20 GHz
0.016
0.025
Group Delay Variation
Frequency = 1 - 12 GHz
±15
ps
Saturated Output Power (Psat)
Frequency = 1 - 12 GHz
Frequency = 12 - 20 GHz
18
16
dBm
dBm
0.022
0.36
dB/°C
dB/°C
* Adjust Vgg between -1V to 0V to achieve Idd = 75 mA typical.
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC871LC5
v03.1010
EA OPTICAL MODULATOR
DRIVER, DC - 20 GHz
Electrical Specifications, TA = +25° C, Vdd = 8V, VC = 0.5V, Idd = 75mA* Continued
Parameter
Output Power for 1 dB Compression (P1dB)
Conditions
Min.
Typ.
Frequency = 1 - 12 GHz
Frequency = 12 - 20 GHz
14
11
16.5
14
dBm
dBm
ps
Rise Time [1]
20% - 80%
20
Fall Time [1]
20% - 80%
19
Additive RMS Jitter [2]
Max.
ps
300
Supply Current (Idd) (Vgg = -0.7V Typ.)
Units
75
fs
mA
Bias Current Adjust (Vgg)
-2
0
V
Output Voltage Adjust (VC)
0
2
V
Max.
Units
[1] Data input = 22.5 Gbps NRZ PRBS 2 -1 pattern, 0.5 Vp-p.
[2] RMS jitter is calculated with 22.5 Gbps 10101... pattern.
* Adjust Vgg between -1V to 0V to achieve Idd = 75mA typical.
23
Parameter
Gain
Small Signal Bandwidth
Conditions
Min.
Typ.
Frequency = 1 - 8 GHz
Frequency = 8 - 16 GHz
Frequency = 16 - 20 GHz
11.5
11
8
14.5
14
11.5
dB
dB
dB
3-dB cutoff
18.5
GHz
Input Return Loss
Frequency = 1 - 10 GHz
Frequency = 10 - 20 GHz
15
10
dB
dB
Output Return Loss
Frequency = 1 - 10 GHz
Frequency = 10 - 20 GHz
10
10
dB
dB
Gain Variation Over Temperature
Frequency = 1 - 10 GHz
Frequency = 10 - 20 GHz
0.017
0.024
Group Delay Variation
Frequency = 1 - 12 GHz
±15
deg
Saturated Output Power (Psat)
Frequency = 1 - 12 GHz
Frequency = 12 - 20 GHz
14
11
dBm
dBm
Output Power for 1 dB Compression (P1dB)
Frequency = 1 - 12 GHz
Frequency = 12 - 20 GHz
11
8
dBm
dBm
8
4
0.024
0.034
dB/°C
dB/°C
Rise Time [1]
20% - 80%
20
ps
Fall Time [1]
20% - 80%
20
ps
Additive RMS Jitter
[2]
300
Supply Current (Idd) (Vgg = -0.8V Typ.)
50
fs
mA
Bias Current Adjust (Vgg)
-2
0
V
Output Voltage Adjust (VC)
0
2
V
[1] Data input = 22.5 Gbps NRZ PRBS 2 -1 pattern, 0.5 Vp-p.
[2] RMS jitter is calculated with 22.5 Gbps 10101... pattern.
* Adjust Vgg between -1V to 0V to achieve Idd = 50mA typical.
23
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
8
OPTICAL & MODULATOR DRIVERS - SMT
Electrical Specifications, TA = +25° C, Vdd = 5V, VC = 0.5V, Idd = 50mA*
8-2
HMC871LC5
v03.1106
v03.1010
EA OPTICAL MODULATOR
DRIVER, DC - 20 GHz
Gain & Return Loss @ Vdd = 5V
25
25
15
15
S21
S11
S22
5
RESPONSE (dB)
RESPONSE (dB)
Gain & Return Loss @ Vdd = 8V
-5
-15
-25
S21
S11
S22
5
-5
-15
-25
-35
-35
0
2
4
6
8
10
12
14
16
18
20
0
2
4
6
FREQUENCY (GHz)
8-3
25
20
20
15
10
+25C
+85C
-40C
5
10
12
14
16
18
20
18
20
18
20
Gain vs. Temperature @ Vdd = 5V
25
GAIN (dB)
GAIN (dB)
Gain vs. Temperature @ Vdd = 8V
15
10
+25C
+85C
-40C
5
0
0
0
2
4
6
8
10
12
14
16
18
20
0
2
4
6
FREQUENCY (GHz)
8
10
12
14
16
FREQUENCY (GHz)
Psat vs. Temperature @ Vdd = 8V
P1dB vs. Temperature @ Vdd = 8V
25
25
+25C
+85C
-40C
+25C
+85C
-40C
22
PSAT (dBm)
22
P1dB (dBm)
OPTICAL & MODULATOR DRIVERS - SMT
8
8
FREQUENCY (GHz)
19
16
13
19
16
13
10
10
0
2
4
6
8
10
12
14
FREQUENCY (GHz)
16
18
20
0
2
4
6
8
10
12
14
16
FREQUENCY (GHz)
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC871LC5
v03.1010
EA OPTICAL MODULATOR
DRIVER, DC - 20 GHz
Output Power vs. Input Power @ 10 GHz,
Vdd = 5V
20
20
16
16
OUTPUT POWER (dBm)
12
+25C
+85C
-40C
8
4
0
12
8
+25C
+85C
-40C
4
0
-10
-8
-6
-4
-2
0
2
4
6
8
10
-10
-8
-6
-4
INPUT POWER (dBm)
25
20
20
FALL TIME (ps)
RISE TIME (ps)
25
15
Vdd = 5V
Vdd = 6V
Vdd = 8V
5
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1
6
8
10
8
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1
VC (V)
Peak-to-Peak Jitter vs. Vdd @ 11.25 Gbps [1]
Peak-to-Peak Jitter vs. Vdd @ 22.5 Gbps [2]
20
20
15
15
P-P JITTER (ps)
P-P JITTER (ps)
4
Vdd = 5V
Vdd = 6V
Vdd = 8V
VC (V)
10
Vdd = 5V
Vdd = 6V
Vdd = 8V
5
2
15
10
5
0
0
Fall Time vs. Vdd @ 22.5 Gbps [2]
Rise Time vs. Vdd @ 22.5 Gbps [2]
10
-2
INPUT POWER (dBm)
10
Vdd = 5V
Vdd = 6V
Vdd = 8V
5
0
0
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1
VC (V)
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1
VC (V)
[1] Data input = 11.25 Gbps NRZ PRBS 223-1 pattern, 0.5 Vp-p.
[2] Data input = 22.5 Gbps NRZ PRBS 223-1 pattern, 0.5 Vp-p.
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
OPTICAL & MODULATOR DRIVERS - SMT
OUTPUT POWER (dBm)
Output Power vs. Input Power @ 10 GHz,
Vdd = 8V
8-4
HMC871LC5
v03.1010
EA OPTICAL MODULATOR
DRIVER, DC - 20 GHz
Supply Current vs. Vdd @ 22.5 Gbps [3]
300
100
250
80
SUPPLY CURRENT (mA)
RMS JITTER (fs)
RMS Jitter vs. Vdd @ 22.5 Gbps [4]
200
150
Vdd = 5V
Vdd = 6V
Vdd = 8V
100
50
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1
60
40
Vdd = 5V
Vdd = 6V
Vdd = 8V
20
0
0
0.1
0.2
0.3
0.4
VC (V)
8-5
0.6
0.7
0.8
0.9
1
Noise Figure vs. Temperature @ Vdd = 8V
6
5
NOISE FIGURE (dB)
OPTICAL & MODULATOR DRIVERS - SMT
8
0.5
VC (V)
+25C
+85C
-40C
4
3
2
1
0
0
2
4
6
8
10
12
14
16
18
FREQUENCY (GHz)
11.25 Gbps NRZ Output Eye Diagrams
Measurements
Current
Min
Max
Jitter p-p
9.78 ps
7.11 ps
9.78 ps
Units
V
Rise Time
19.6 ps
18.7 ps
19.6 ps
ps
Fall Time
19.6 ps
18.7 ps
19.6 ps
ps
Eye Amp
3.03 V
3.03 V
3.03 V
ps
Time scale: 40 ps/div
Amplitude scale: 800 mV/div
Vdd = 8V, Vin: 11.25 Gbps NRZ PRBS 231-1, 0.5 Vp-p
Vout: 3.03Vp-p
[1] Data input = 11.25 Gbps NRZ PRBS 223-1 pattern, 0.5 Vp-p.
[2] Source jitter was not de-embedded
[3] Data input 22.5 Gbps NRZ PRBS 223-1 pattern, 0.5 Vp-p.
[4] RMS jitter is measured with 22.5 Gbps 10101...pattern
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC871LC5
v03.1010
EA OPTICAL MODULATOR
DRIVER, DC - 20 GHz
11.25 Gbps NRZ Output Eye Diagrams
Measurements
Current
Min
Max
Jitter p-p
11.56 ps
8.89 ps
11.56 ps
Units
V
Rise Time
16.9 ps
16.9 ps
16.9 ps
ps
Fall Time
16.9 ps
16.9 ps
17.8 ps
ps
Eye Amp
2.60 V
2.60 V
2.60 V
ps
Time scale: 40 ps/div
Amplitude scale: 600 V/div
Vdd = 5V, Vin: 11.25Gbps NRZ PRBS 231-1, 0.5V p-p,
Vout: 2.60Vp-p
8
22.5 Gbps NRZ Output Eye Diagrams
Measurements
Min
Max
Units
Jitter p-p
9.333 ps
8.000 ps
9.333 ps
V
Rise Time
17.78 ps
17.78 ps
18.67 ps
ps
Fall Time
17.78 ps
17.33 ps
18.67 ps
ps
Eye Amp
3.00 V
3.00 V
3.00 V
ps
Time scale: 20 ps/div
Amplitude scale: 800 mV/div
Vdd = 8V, Vin: 22.5 Gbps NRZ PRBS 231-1, 0.5 Vp-p
Vout: 3.00Vp-p
22.5 Gbps NRZ Output Eye Diagrams
Measurements
Current
Min
Max
Units
Jitter p-p
10.667 ps
8.889 ps
11.556 ps
V
Rise Time
16.00 ps
10.67 ps
16.00 ps
ps
Fall Time
17.78 ps
16.89 ps
17.78 ps
ps
Eye Amp
2.63 V
2.63 V
2.64 V
ps
Time scale: 20 ps/div
Amplitude scale: 800 V/div
Vdd = 5V, Vin: 22.5Gbps NRZ PRBS 231-1, 0.5V p-p,
Vout: 2.63Vp-p
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
OPTICAL & MODULATOR DRIVERS - SMT
Current
8-6
HMC871LC5
v03.1010
Absolute Maximum Ratings
Drain Bias Voltage (Vdd)
+9V
Gate Bias Voltage (Vgg)
-2 to 0V
Control Bias Voltage (VC)
(Vdd -8) to Vdd (V)
RF Input Power (RFIN)(Vdd = +8 Vdc)
+10 dBm
Channel Temperature
175 °C
Continuous Pdiss (T = 85 °C)
(derate 15.08 mW/°C above 85 °C)
1.35 W
Thermal Resistance
(channel to ground paddle)
66.31 °C/W
Storage Temperature
-65 to +150 °C
Operating Temperature
-40 to +85 °C
ESD Sensitivity (HBM)
Class 1A
EA OPTICAL MODULATOR
DRIVER, DC - 20 GHz
Typical Supply Current vs. Vdd
Vdd (V)
Idd (mA)*
Power
Dissipation (W)
+5
50
0.25
+6
60
0.36
+8
75
0.60
* Adjust Vgg between -1V and 0V to achieve Idd shown.
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
OPTICAL & MODULATOR DRIVERS - SMT
8
8-7
Outline Drawing
NOTES:
1. PACKAGE BODY MATERIAL: ALUMINA
2. LEAD AND GROUND PADDLE PLATING: 30-80 MICROINCHES
GOLD OVER 50 MICROINCHES MINIMUM NICKEL.
3. DIMENSIONS ARE IN INCHES [MILLIMETERS].
4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM -C6. ALL GROUND LEADS AND GROUND PADDLE MUST BE
SOLDERED TO PCB RF GROUND.
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC871LC5
v03.1010
EA OPTICAL MODULATOR
DRIVER, DC - 20 GHz
Pin Descriptions
Function
Description
1, 3, 4, 7 - 12, 14,
16 - 20, 23 - 29, 31
N/C
The pins are not connected internally; however, all data
shown herein was measured with these pins connected
to RF/DC ground externally.
2
VC
Output voltage swing adjust. +0.5V should
be applied for nominal operation.
5
RFIN
This pin is DC coupled
and matched to 50 Ohms.
DC blocking is required.
6, 21
GND
These pins and exposed package base
must be connected to RF/DC ground.
13
ACG2
Low frequency termination. Attach bypass
capacitor per application circuit herein.
15
Vgg
Gate control for amplifier. Please follow “MMIC
Amplifier Biasing Procedure” application note.
22
RFOUT
This pin is DC coupled
and matched to 50 Ohms.
DC blocking is required.
30
ACG1
Low frequency termination. Attach bypass
capacitor per application circuit herein.
32
Vdd
Power supply for the amplifier. External bypass
capacitors are required.
Interface Schematic
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
8
OPTICAL & MODULATOR DRIVERS - SMT
Pin Number
8-8
HMC871LC5
v03.1010
EA OPTICAL MODULATOR
DRIVER, DC - 20 GHz
Evaluation PCB
OPTICAL & MODULATOR DRIVERS - SMT
8
8-9
List of Materials for Evaluation PCB 127517
Item
Description
J1 - J2
PCB Mount SMA Connector
J3 - J4
2mm Molex Header
C1
4.7 µF Capacitor, Tantalum
C2, C3
1000 pF Capacitor, 0402 Pkg.
C4, C9
100 pF Capacitor, 0402 Pkg.
C5
0.1 µF Capacitor, 0603 Pkg.
C6
0.01 µF Capacitor, 0603 Pkg.
C7
2.2 µF Capacitor, 0603 Pkg.
C8
1000 pF Capacitor, 0603 Pkg.
U1
HMC871LC5, Modulator Driver
PCB [2]
127381 Evaluation PCB
[1]
The circuit board used in the application should
use RF circuit design techniques. Signal lines
should have 50 Ohm impedance while the package
ground leads and package bottom should be
connected directly to the ground plane similar to
that shown. A sufficient number of via holes should
be used to connect the top and bottom ground
planes. The evaluation board should be mounted
to an appropriate heat sink. The evaluation circuit
board shown is available from Hittite upon request.
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Arlon 25FR or Rogers 4350
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC871LC5
v03.1010
EA OPTICAL MODULATOR
DRIVER, DC - 20 GHz
Application Circuit
Device Operation
These devices are susceptible to damage from Electrostatic Discharge. Proper precautions should be observed
during handling, assembly and test.
The input to this device should be AC-coupled. To provide the typical 4Vp-p output voltage swing, a 0.5Vp-p AC
coupled input voltage swing is required.
Device Power Up Instructions
1. Ground the device, no RF signal applied to device
2. Set Vgg to -2V (no drain current)
3. Set VC to +0.5V (no drain current)
4. Set Vdd to +5V or +8V (no drain current)
5. Adjust Vgg for Idd = 50mA (Vdd = 5V) or Idd = 75mA (Vdd = 8V)
6. Apply RF signal.
• Vgg may be varied between -1V and 0V to provide the desired eye crossing point percentage (i.e. 50% crosspoint)
and a limited cross point control capability (±20%)
Device Power Down Instructions
1. Reverse the sequence identified above in steps 1 through 6.
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
OPTICAL & MODULATOR DRIVERS - SMT
8
8 - 10