TANTALUM ELECTROLYTIC CAPACITORS (Ultra Small Package, 0603 Size Chip Tantalum Capacitor.) TMCJ Series Features • Rendered even smaller-sized thanks to accumulated technological knowhow of TMCP. (reduced to about 1/3 the cabic volume of the TMCP type) • Suitable for high-density packaging essential to Audio Visual and other equipment downsizng. Produt symbol : (Example) TMCJ Series 6.3V 10µF±20% TMC J 0J 106 M T R F Tinned plated terminals (Sn 100) Packing polarity code Packing method code (T: carrier tape) Capacitance tolerance code (M : ± 20%) Capacitance code Rated voltage code Type of series Case size code Product specifications TMCJ Test conditions JIS C5101-1:1998 Operating temperature range –55°C ~ +125°C Rated voltage DC2.5 ~ 20V 85°C Surge voltage DC3.2 ~ 26V 85°C Derated voltage DC1.6 ~ 13V 125°C Capacitance 0.68 ~ 22µF Capacitance tolerance ±20% Leakage current Refer to table standard porduct table after the rated voltage is Paragraph 4.7, 120 Hz Paragraph 4.9, in 5 minutes applied. Outline of drawings and dimensions Anode indication belt mark L tanδ W W 0.2 or less C/C ±20% or less Surge withstanding tanδ Specified initial value or less voltage Specified initial value or less LC Specified initial value –55 – -20 ~ 0% 0.2 0.3 C/C Dimensions J tanδ (Unit: mm) L±0.1 1.6 W±0.1 0.8 Case size H±0.1 r±0.15 0.8 0.3 µF 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 Code 684 105 155 225 335 475 685 106 156 226 2.5 0E Temperature characteristics a±0.1 0.6 J J J J J J J J J J J J J J 16 1C 20 1D J tanδ 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0 ~ +20% 0 ~ +20% 0.2 0.3 Paragraph 4.24 Refer to standard product table — 1000% or less 1250% or less specified intial specified intial value or less value or less C/C ±20% or less Solder heat resistance J J J Solder Dip 260±5℃ 10±1 sec. tanδ Specified initial value or less LC Specified initial value or less C/C ±20% or less Moisture resistance no load Leakage current case code µA 0.5 J 0.5 J 0.5 J 0.5 J 0.5 J 0.5 J 0.5 J 0.5 J 6.0 J 8.8 J 0.5 J 0.5 J 0.5 J 0.5 J 0.6 J 0.5 J 0.5 J 0.5 J 0.5 J 0.5 J 0.5 J 0.5 J 0.5 J Reflow 260℃ 10±1 sec. Paragraph 4.22, 40°C tanδ 150% Specified initial value or less LC Specified initial value or less 90 ~ 95%RH,500hours Paragraph 4.23, 85°C C/C ±20% or less High-temperature load Standard product tables - TMCJ series Rated voltage capacitance V. DC µF 2.5 4.7 6.8 10 15 22 4 4.7 6.8 10 15 22 6.3 2.2 3.3 4.7 6.8 10 10 1.5 2.2 3.3 4.7 16 1 1.5 2.2 20 0.68 125 or less LC Rated voltage (V.DC) 4 6.3 10 0G 0J 1A J J J J J 85 Value shown table Standard value and case size Capacitance Paragraph 4.26 a H J case product (0603) Case code Paragraph 4.8, 120Hz tanδ Specified initial value or less The rated voltage is applied LC 200% Specified initial value or less for 2000 hours. Product name TMCJ0E475 TMCJ0E685 TMCJ0E106 TMCJ0E156 TMCJ0E226 TMCJ0G475 TMCJ0G685 TMCJ0G106 TMCJ0G156 TMCJ0G226 TMCJ0J225 TMCJ0J335 TMCJ0J475 TMCJ0J685 TMCJ0J106 TMCJ1A155 TMCJ1A225 TMCJ1A335 TMCJ1A475 TMCJ1C105 TMCJ1C155 TMCJ1C225 TMCJ1D684 C/C ±20% or less Thermal shock Failure rate tanδ Specified initial value or less LC Specified initial value or less 1%/1000hours Leave at -55°C, normal temperature, 125°C, and normal temperature for 30 min., 3 min., 30 min., and 3 min. Repeat this operation 5 times running. 85°C. The rated voltage is applied (through a protective resistor of 1 Ω/V). ※This catalog is designed for providing general information. Please inquire of our Sales Department to confirm specifications prior to use. Marking indication TMCJ series J case + JA ① ② ③ 135 ①Anode indication belt mark ②Simplified code of rated voltage (J:6.3V) ③Simplified code of nominal capacitance (A:10µF) Hitachi AIC Inc.