TANTALUM ELECTROLYTIC CAPACITORS TMF Series Chip Tantalum Capacitor With face down Terminals Features • A new, originally designed structure with reduced space requirement, resulting in the small size and large capacitance of units. • Best suited for multi-media applications, such as cell phones, digital video cameras, etc. • Environmentally friendly terminal plating -- lead-free (100% Sn) solder plating. Produt code : (Example) TMF Series LM case 6.3V 22µF ± 20% Product specifications TMF Operating temperature range −55℃∼＋125℃ Rated voltage DC2.5∼16V 85℃ Surge voltage DC3.2∼20V 85℃ Derated voltage DC1.6∼10V 125℃ Capacitance 2.2∼220μF Capacitance tolerance ±20％ Paragraph 4.7, 120 Hz Leakage current Refer to standard product table after the rated voltage is Test conditions JIS C5101-1:1998 TMF LM 0J 226 M T R F Paragraph 4.9, in 5 minutes Tinned plated terminals (Sn 100) Packing polarity code Packing method code (T: carrier tape) Capacitance tolerance code (M : ± 20%) Capacitance code Rated voltage code Type of series Case size code applied. tanδ Outline of drawings and dimensions 0.3 or less Paragraph 4.8, 120Hz Anode indication belt mark △C/C Surge withstanding tanδ voltage LC ±20％ or less Specified initial value or less Paragraph 4.26 Specified initial value or less H Specified initial value L W a △C/C − tanδ 0.3 −55 85 125 −20∼＋20％ 0∼＋20％ 0∼＋20％ 0.6 0.3 0.4 Value shown table Temperature characteristics Dimensions Case code LM LP LA L±0.1 1.6 2.0 3.2 Paragraph 4.24 or less (Unit : mm) Case size W±0.1 H±0.1 0.85 0.8 1.25 0.9 1.60 0.9 R±0.1 0.5 0.5 0.8 LC a±0.1 0.65 0.90 1.20 Solder heat resistance Refer to standard product table − 1000% or less 1250% or less specified initial specified initial value or less value or less △C/C ±20％ or less tanδ Specified initial value or less LC Specified initial value or less △C/C ±20％ or less tanδ 150% Specified initial value or less LC Specified initial value or less Solder Dip 260±5℃ 10±1 sec. Reflow 260℃ 10±1 sec. Standard value and case size Capacitance µF 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 150 220 Code 105 155 225 335 475 685 106 156 226 336 476 686 107 157 227 2.5 0E LM LM LP LP LA LA Rated voltage (V.DC) 4 6.3 10 0G 0J 1A LM LM LP LP LA LA LM LM LP LP LA LA LM LM LP LP LA LA Moisture resistance no load 16 1C LM LM LP LP LA LA High-temperature load Thermal shock Failure rate Paragraph 4.22, 40°C 90 ~ 95%RH,500hrs △C/C ±20％ or less Paragraph 4.23, 85°C tanδ Specified initial value or less The rated voltage is applied LC 200% Specified initial value or less for 2000 hours. △C/C ±20％ or less tanδ Specified initial value or less LC Specified initial value or less 1％／1000hrs Leave at -55°C, normal temperature, 125°C, and normal temperature for 30 min., 3 min., 30 min., and 3 min. Repeat this operation 5 times running. 85°C. The rated voltage is applied (through a protective resistor of 1 Ω/V). ※This catalog is designed for providing general information. Please inquire of our Sales Department to confirm specifications prior to use. 133 Hitachi AIC Inc. TANTALUM ELECTROLYTIC CAPACITORS Standard product tables - TMF series Standard product tables - TMF series Rated voltage capacitance Ｖ.ＤＣ µF 2.5 33 47 68 100 150 220 4 22 33 47 68 100 150 6.3 15 22 33 47 68 100 10 6.8 10 15 22 33 47 16 2.2 3.3 4.7 6.8 10 15 tanδ 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 Leakage current case code µA 8.2 LM 11.7 LM 17.0 LP 25.0 LP 37.5 LA 55.0 LA 8.8 LM 13.2 LM 18.8 LP 27.2 LP 40.0 LA 60.0 LA 9.4 LM 13.8 LM 20.7 LP 29.6 LP 42.8 LA 63.0 LA 6.8 LM 10.0 LM 15.0 LP 22.0 LP 33.0 LA 47.0 LA 3.5 LM 5.2 LM 7.5 LP 10.8 LP 16.0 LA 24.0 LA Product name TMFLM0E336 TMFLM0E476 TMFLP0E686 TMFLP0E107 TMFLA0E157 TMFLA0E227 TMFLM0G226 TMFLM0G336 TMFLP0G476 TMFLP0G686 TMFLA0G107 TMFLA0G157 TMFLM0J156 TMFLM0J226 TMFLP0J336 TMFLP0J476 TMFLA0J686 TMFLA0J107 TMFLM1A685 TMFLM1A106 TMFLP1A156 TMFLP1A226 TMFLA1A336 TMFLA1A476 TMFLM1C225 TMFLM1C335 TMFLP1C475 TMFLP1C685 TMFLA1C106 TMFLA1C156 Marking indication TMF series ①Anode indication belt mark ②Simplified code of rated voltage (J:6.3V) ③Simplified code of nominal capacitance (A:10µF) JA + LM・LP case ① ② ③ LA case ①Anode indication belt mark ②Simplified code of rated voltage (G:4V) ③Simplified code of nominal capacitance (A8:100µF) ④Lot indication (A:for manufacturing in January, 2009) GA8A + ① ② ③④ Lot indication Month Year 1 2 3 4 5 6 7 8 9 10 11 12 2009 2010 2011 2012 A N a n B P b p C Q c q D R d r E S e s F T f t G U g u H V h v J W j w K X k x L Y l y M Z m z Hitachi AIC Inc. 134